Husky 10000 Lumen Twin Head LED Work Light with Tripod - Instruction Manual

Introduction

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Husky 10000 Lumen Twin Head LED Work Light with Tripod. Please read this manual thoroughly before using the product and retain it for future reference.

The Husky 10,000-Lumen Twin Head LED Work Light is designed for versatility, offering powerful illumination for various tasks. It can be used with or without its included tripod. When detached from the tripod, the integrated easy-grip handle facilitates convenient transport.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Ensure the work light is connected to a grounded outlet.
• Do not operate the light with a damaged cord or plug.
• Keep the work light away from flammable materials.
• Do not look directly into the illuminated LED light.
• Always unplug the light before cleaning or performing maintenance.
• This product is intended for indoor and outdoor use, but protect from direct heavy rain.

Package Contents

Verify that all components are present before assembly. If any parts are missing or damaged, do not attempt to assemble or operate the work light. Contact customer service for assistance.

• Twin Head LED Work Light Assembly
• Adjustable Tripod Stand
• Instruction Manual

Figure 1: Complete Husky 10000 Lumen Twin Head LED Work Light with Tripod. This image displays the fully assembled work light, featuring two LED light heads mounted on an adjustable tripod stand. The power cord is visible, running down the stand.

Setup Instructions

1. Unpack Components: Carefully remove all parts from the packaging.
2. Assemble Tripod:
   • Place the tripod base on a flat, stable surface.
   • Extend the tripod legs fully until they lock into position.
   • Adjust the height of the tripod by loosening the locking collars, extending the pole sections, and then tightening the collars securely.
3. Attach Light Heads:
   • Mount the twin head LED assembly onto the top of the tripod pole.
   • Secure the light assembly using the provided fasteners or locking mechanism. Ensure it is firmly attached.
4. Adjust Light Direction: Loosen the adjustment knobs on each light head to pivot and tilt them to the desired angle. Tighten the knobs to secure the position.
5. Connect Power: Plug the power cord into a standard grounded electrical outlet.

Note: The light heads can be detached from the tripod for handheld use. To do so, carefully unfasten the light assembly from the tripod and use the integrated handle.

Operating Instructions

1. Power On/Off: Locate the power switch on the light assembly. Press the switch to turn the light on or off.
2. Adjust Brightness (if applicable): If your model includes brightness adjustment, use the designated control to cycle through available brightness settings. (Note: This model provides 10000 lumens, typically a single brightness setting.)
3. Positioning: Adjust the height of the tripod and the angle of the light heads to illuminate your work area effectively. Ensure the tripod is stable and not prone to tipping.

Maintenance

• Cleaning: Disconnect the power before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the work light in a dry, cool place, away from direct sunlight and moisture. Collapse the tripod for compact storage.
• Cord Inspection: Regularly inspect the power cord and plug for any signs of damage. If damaged, discontinue use and have it repaired by a qualified technician.
• LED Bulbs: The LED bulbs are long-lasting and generally do not require replacement. If a bulb fails, contact customer support.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official HUSKY website. Keep your purchase receipt as proof of purchase.

Manufacturer: HUSKY

For further assistance, please contact HUSKY customer service.