Link2Home Contractor Grade Retractable Extension Cord Reel

1. Introduction

This manual provides instructions for the safe and efficient use of your Link2Home Contractor Grade Retractable Extension Cord Reel. This product features a 75-foot, 12AWG high-visibility SJTW cable with four grounded power outlets, designed for various applications including powering tools on job sites or in garages.

Figure 1: Link2Home Contractor Grade Retractable Extension Cord Reel.

2. Safety Information

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Do not immerse the cord reel in water or use it in wet conditions unless specifically rated for outdoor wet use.
• Ensure the cord is fully unwound when carrying maximum load to prevent overheating.
• Do not overload the cord reel. It features a built-in circuit breaker that automatically shuts off power if voltage or current exceeds rated limits.
• Keep children and pets away from the cord reel during operation.
• Inspect the cord and outlets for damage before each use. Do not use if damaged.

Video 1: Overview of the Link2Home Retractable Extension Cord, demonstrating its features and operation.

3. Setup

1. Unpack the Unit: Carefully remove the cord reel from its packaging. Inspect for any signs of damage.
2. Position the Reel: Place the cord reel on a stable, flat surface near the power source. Ensure the area is clear of obstructions.
3. Connect to Power: Plug the main power cord of the reel into a grounded 120V electrical outlet.

Figure 2: Key features of the cord reel, including outlets, ON/OFF switch, and thermal cut reset button.

4. Operating Instructions

1. Extend the Cord: Grasp the cord by the plug end and pull it to the desired length. The cord will lock into place at various intervals.
2. Connect Devices: Plug your tools or devices into the four grounded outlets on the reel.
3. Activate Power: Flip the ON/OFF switch to the 'ON' position. The power light indicator will illuminate.
4. Retract the Cord: To retract, pull the cord slightly further out, then release it slowly. The automatic retraction mechanism will wind the cord back into the reel. Guide the cord to ensure smooth retraction and prevent tangling.

Figure 3: Cord reel in use with a power tool, demonstrating practical application.

Video 2: Demonstration of extending and retracting the cord, and using the outlets.

5. Maintenance

• Keep the cord reel clean and free from dust and debris.
• Store the cord reel in a dry place when not in use.
• Regularly inspect the cord for cuts, abrasions, or other damage. Replace if necessary.
• Ensure the plug and outlets are clean and free of corrosion.

6. Troubleshooting

• No Power to Outlets: Check if the cord reel is properly plugged into the wall outlet. Ensure the ON/OFF switch is in the 'ON' position.
• Circuit Breaker Tripped: If the red 'OVERLOAD' indicator light is on and power is off, the circuit breaker has tripped due to an overload. Disconnect all devices, press the 'RESET' button, and then reconnect devices one by one to identify the overloaded item.
• Cord Not Retracting: Ensure there are no kinks or obstructions in the cord. Pull the cord out slightly further, then release it to engage the retraction mechanism.

7. Specifications

8. Warranty and Support

The Link2Home Contractor Grade Retractable Extension Cord Reel is backed by a 3-year limited warranty.

For customer service, technical support, or warranty claims, please refer to the contact information provided on the product packaging or visit the official Link2Home website.

Figure 4: Icons representing customer service, email support, and online store presence.