Welcome
This manual provides essential information for the safe and efficient operation of your Link2Home Heavy Duty Retractable Extension Cord Reel. Please read these instructions carefully before first use and retain for future reference.
Important Safety Instructions
- Indoor Use Only: This product is designed for indoor use. Do not expose to moisture or use in wet conditions.
- Electrical Rating: Do not exceed the maximum electrical rating of 1200 Watts / 10 Amps / 120 Volts. Overloading can cause overheating and fire.
- Circuit Breaker: The built-in circuit breaker will automatically trip if the rated current is exceeded to protect connected devices. If the breaker trips, disconnect devices, reset the breaker, and reduce the load.
- Cord Management: Always uncoil the cord completely before use to prevent overheating.
- Grounding: This product is equipped with a 3-prong grounded plug for your safety. Ensure it is plugged into a properly grounded outlet.
- Damage Inspection: Do not use if the cord or housing is damaged.
- Children: Keep out of reach of children.
Product Features
The Link2Home Heavy Duty Retractable Extension Cord Reel offers convenient power distribution with integrated cord management.
- Tangle-Free Cord Management: The extension cord winds easily into the reel for neat storage.
- Built-in Circuit Breaker: Automatically protects devices from damage due to current or voltage overload.
- Heavy Duty Power: Features 4 grounded 120V outlets and 2 USB ports (2.1A fast charge).
- Durable Cord: Equipped with a 20 ft, 16 AWG SJT cable.
- Compact and Portable: Unique handle design for easy transport and storage.
- ON/OFF Switch: For convenient power control.

Image: Front view of the Link2Home Retractable Extension Cord Reel, showing the 4 grounded outlets, 2 USB ports, power switch, and rewind knob.

Image: Detail of the high-quality SJT cable, indicating Thermoplastic insulation and Hard Service Cord construction.
Setup Instructions
- Unpack: Carefully remove the cord reel from its packaging.
- Positioning: Place the cord reel on a stable, dry surface, away from heat sources and moisture.
- Extend Cord: Grasp the end of the main power cord and pull it out from the reel to the desired length. Ensure the cord is fully uncoiled if using high-power devices to prevent overheating.
- Plug In: Insert the 3-prong plug of the cord reel into a standard 120V grounded electrical outlet.

Image: The cord reel highlighting its cable management system and easy rewind mechanism for organized storage.
Operating the Cord Reel
- Power On: Once plugged into a wall outlet, press the red ON/OFF switch to the 'ON' position. The power indicator light (if present) should illuminate.
- Connect Devices: Plug your appliances or devices into the 4 grounded 120V outlets or the 2 USB ports. Ensure the total wattage does not exceed 1200W.
- USB Charging: The USB ports provide 2.1A fast charging for compatible devices.
- Retract Cord: To retract the cord, unplug all devices and the main power cord from the wall. Use the integrated rewind knob (or handle) to manually wind the cord back into the reel. Guide the cord evenly to prevent tangling.
- Power Off: When not in use, press the ON/OFF switch to the 'OFF' position and unplug the cord reel from the wall outlet.

Image: A detailed view of the cord reel's interface, showing the four 120V outlets, two USB 2.1A charging ports, and the power switch.
Care and Maintenance
- Cleaning: Disconnect the cord reel from power before cleaning. Wipe the exterior with a dry, soft cloth. Do not use liquid cleaners or immerse in water.
- Storage: Store the cord reel in a cool, dry place when not in use. Ensure the cord is fully retracted and neatly stored.
- Inspection: Periodically inspect the cord and plug for any signs of damage, such as cuts, fraying, or bent prongs. Discontinue use if damage is found.
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets/USB ports. | Cord reel not plugged in; ON/OFF switch is off; Circuit breaker tripped; Wall outlet has no power. | Ensure cord reel is securely plugged in. Turn ON/OFF switch to 'ON'. Press the reset button on the circuit breaker. Check the wall outlet with another device. |
| Circuit breaker trips repeatedly. | Overload (too many devices or high-power devices connected). | Unplug some devices to reduce the load. Ensure total wattage does not exceed 1200W. Press the reset button. |
| Cord is difficult to retract. | Cord is tangled or not guided properly. | Ensure the cord is not twisted. Guide the cord evenly as you turn the rewind knob. |
| USB ports not charging. | Device not compatible; USB cable faulty; Power switch off. | Check device compatibility. Try a different USB cable. Ensure the cord reel's power switch is ON. |
Technical Specifications
| Feature | Detail |
|---|---|
| Model Number | ULH-007 |
| Cord Length | 20 ft (6.1 meters) |
| Wire Gauge | 16 AWG SJT |
| Outlets | 4 Grounded 120V Outlets |
| USB Ports | 2 USB Ports (2.1A Fast Charge) |
| Voltage | 120 Volts |
| Maximum Power | 1200 Watts |
| Amperage Capacity | 10 Amps |
| Special Features | Built-in Circuit Breaker, Compact, Portable |
| Certifications | ETL Certified |
| Item Weight | 2.42 pounds |
| Package Dimensions | 9.65 x 8.66 x 4.57 inches |
Warranty Information
This Link2Home product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions regarding setup, operation, troubleshooting, or warranty claims, please contact Link2Home customer support. Refer to the product packaging or the official Link2Home website for the most current contact information.

Image: The cord reel featuring its integrated handle, emphasizing its compact and portable design for easy transport and storage.