Thrustmaster Flying Clamp Instruction Manual

1. Introduction

The Thrustmaster Flying Clamp is a robust metal desk and table clamp designed to securely mount flight simulation devices. It enhances gaming ergonomics and immersion for users of Thrustmaster Civil Aviation (TCA) and T.16000M FCS product ranges, as well as other compatible flight peripherals on PC, PlayStation 5, and Xbox platforms. This manual provides detailed instructions for assembly, installation, operation, and maintenance of your Flying Clamp.

2. What's in the Box

Please verify that all components are present before proceeding with assembly.

• Thrustmaster Flying Clamp (disassembled components)
• Instruction Manual
• Set of foam pads (initial application)
• Replacement foam pads

3. Setup and Assembly

The Flying Clamp comes disassembled and requires basic assembly. Ensure you have the following tools:

• Phillips head #2 screwdriver
• 4.5mm Metric Allen/Hex key

3.1. Assembling the Clamp Structure

Connect the main metal frame components using the provided screws and the required tools. Ensure all connections are secure to provide a stable mounting platform.

Figure 3.1: Exploded view showing the internal structure and components of the Flying Clamp. This illustrates how the various parts fit together during assembly.

3.2. Applying Foam Pads

Apply the initial set of foam pads to the contact surfaces of the clamp. These pads protect your desk and ensure a firm grip. Replacement pads are included for future use if the original pads become worn.

3.3. Attaching to a Desk or Table

Position the assembled clamp on the edge of your desk or table. Tighten the clamp screws until the unit is firmly secured. Do not overtighten, but ensure there is no movement.

Figure 3.2: Side view of the Flying Clamp demonstrating how it attaches to a desk or table, highlighting the adjustable clamping mechanism.

3.4. Mounting Your Flight Peripheral

The mounting plate features numerous cutouts designed to accommodate various Thrustmaster flight peripherals. Align your device with the appropriate holes on the platform and secure it using the device's mounting screws. For most Thrustmaster devices, this involves two bolts.

Figure 3.3: Top-down view of the mounting plate, showing the various cutouts and screw points for attaching different flight simulation devices.

Figure 3.4: The Flying Clamp with an Airbus joystick securely mounted, illustrating a typical setup for flight simulation.

Figure 3.5: The Flying Clamp supporting a T.16000M FCS joystick, showcasing its compatibility with various Thrustmaster peripherals.

Figure 3.6: A throttle quadrant mounted on the Flying Clamp, demonstrating its versatility for different flight simulation controls.

4. Operating the Flying Clamp

The Flying Clamp is designed for ergonomic positioning of your flight simulation devices. Once mounted, you can adjust the height of the platform to suit your preference, ensuring comfortable and immersive gameplay.

• Height Adjustment: The modular support allows for adjustable height. Loosen the appropriate fasteners, set the platform to your desired height, and re-tighten securely.
• Compatibility: The clamp is compatible with a wide range of Thrustmaster flight simulation devices, including those from the TCA and T.16000M FCS product lines.

5. Maintenance

To ensure the longevity and optimal performance of your Thrustmaster Flying Clamp, follow these maintenance guidelines:

• Cleaning: Wipe the metal surfaces with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.
• Foam Pads: Periodically inspect the foam pads for wear and tear. If they become damaged or lose their grip, replace them with the spare set provided.
• Fasteners: Occasionally check all screws and clamping mechanisms to ensure they remain tight. Re-tighten if necessary to maintain stability.

6. Troubleshooting

If you encounter issues with your Flying Clamp, refer to the following common solutions:

• Clamp is not stable on the desk:
  • Ensure the clamp screws are fully tightened against the desk surface.
  • Verify that the foam pads are correctly positioned and not worn out. Replace if necessary.
  • Check that the desk surface is clean and free of debris that might prevent a secure grip.
• Flight peripheral is loose on the platform:
  • Confirm that your device is properly aligned with the mounting holes.
  • Ensure all mounting screws for the peripheral are securely tightened.
• Difficulty adjusting height:
  • Loosen the height adjustment fasteners sufficiently before attempting to move the platform.
  • Ensure no cables or other obstructions are impeding the movement.

If these steps do not resolve your issue, please contact Thrustmaster Customer Support.

7. Specifications

8. Warranty Information

The Thrustmaster Flying Clamp (Model 4060174) is covered by a one-year limited warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. For full details regarding warranty terms, conditions, and limitations, please refer to the official warranty document available on the Thrustmaster website or contact customer support.

9. Customer Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official Thrustmaster support website or contact their customer service department. You can find up-to-date contact information and FAQs on the Thrustmaster Support Page.