Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Weight Limit: The top surface has a maximum weight capacity of 50 lbs (22.7 kg). The lower rattan shelf also has a maximum weight capacity of 50 lbs (22.7 kg). Do not exceed these limits.
- Ensure all connections are securely fastened before use.
- Do not stand or climb on the product.
- Keep small parts away from children during assembly.
- This product is designed for residential use only.
Image: Diagram illustrating the Hayes Nightstand's features, including a 50 lbs weight limit for both the tempered glass top and the rattan bottom shelf, solid wood frame, wire-brushed light brown finish, and floor protectors.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- A: Tempered Glass Top (1)
- B: Table Frame (1)
- C: Rattan Bottom Shelf (1)
- D: Assembly Hardware Kit (Screws, Allen Wrench, Wood Plugs) (1)
- E: Assembly Guide (1)
Tools Required (Not Included):
- Scissors (for opening packaging)
- Phillips Head Screwdriver (for securing certain components, if applicable)
Assembly Instructions
Estimated assembly time: 15 minutes. It is recommended to assemble on a soft, clean surface to prevent scratches.
Step 1: Prepare the Frame
Carefully unbox all components. Place the main table frame (B) on a soft, flat surface with the bottom side facing up. Ensure the pre-drilled holes for the rattan shelf are accessible.
Step 2: Attach the Rattan Shelf
Align the rattan bottom shelf (C) with the designated slots or pre-drilled holes on the table frame (B). Secure the shelf using the provided screws from the hardware kit (D). Tighten screws evenly with a Phillips head screwdriver until snug, but do not overtighten.
Image: A detailed view of the light brown rattan bottom shelf integrated into the solid wood frame, showing the weave pattern and construction.
Step 3: Install the Glass Top
Carefully place the tempered glass top (A) into the recessed area on the top of the table frame (B). Ensure it sits flush and securely within the frame. The glass is designed to fit without additional fasteners.
Image: A close-up shot of the corner of the tempered glass top, showing its clear surface and how it fits into the light brown wire-brushed solid wood frame.
Step 4: Final Check
Once assembled, gently lift and move the nightstand to its desired location. Ensure all connections are stable and the table is level. Floor protectors are included and pre-installed on the legs to prevent scratching floors.
Image: The fully assembled Nathan James Hayes Nightstand, featuring a light brown wood finish, tempered glass top, and rattan shelf, positioned as an end table in a living room setting.
Operating Instructions (Usage)
The Nathan James Hayes Nightstand is designed for versatile use in various indoor settings.
- Placement: Ideal as a nightstand beside a bed, an end table next to a sofa, or a side table in a living area.
- Top Surface: Use the tempered glass top for placing lamps, beverages, decorative items, or personal electronics. Adhere to the 50 lbs weight limit.
- Bottom Shelf: The rattan shelf provides open storage for books, magazines, small baskets, or other items. Adhere to the 50 lbs weight limit.
- Stability: Always place items evenly on the surfaces to maintain stability.
Image: The Hayes Nightstand functioning as a bedside table, showcasing its light brown wood finish, glass top, and rattan shelf, with a lamp and decorative items.
Care and Maintenance
- Cleaning: Wipe surfaces with a dry or damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish or glass.
- Spills: Promptly wipe up any spills to prevent staining, especially on the wood and rattan components.
- Heat Protection: Use coasters under hot items to protect the glass and wood surfaces.
- Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or discoloration of the wood finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table feels wobbly or unstable. | Screws are loose; uneven floor surface. | Check and tighten all assembly screws. Ensure the table is on a flat, level surface. Adjust floor protectors if necessary. |
| Glass top does not sit flush. | Debris in the recess; frame not assembled correctly. | Remove any debris from the glass recess. Recheck frame assembly to ensure all parts are correctly aligned. |
| Rattan shelf appears loose. | Shelf not fully seated or screws loose. | Ensure the rattan shelf is fully inserted into its grooves and all securing screws are tightened. |
Product Specifications
| Brand: | Nathan James |
| Model Name: | Hayes Side Table |
| Model Number: | 33301 |
| Dimensions (L x W x H): | 18"D x 18"W x 22"H (45.7 cm x 45.7 cm x 55.9 cm) |
| Weight: | 15 Pounds (6.8 kg) |
| Material: | Solid Wood (Rubberwood), Tempered Glass, Rattan |
| Finish: | Wire-brushed Light Brown |
| Maximum Weight Recommendation (Top): | 50 Pounds (22.7 kg) |
| Maximum Weight Recommendation (Shelf): | 50 Pounds (22.7 kg) |
| Assembly Required: | Yes (Easy 15-minute assembly) |
| Indoor/Outdoor Usage: | Indoor Only |
Warranty and Support
Manufacturer Warranty: The Nathan James Hayes Nightstand comes with a lifetime manufacturer warranty, ensuring quality and durability.
Customer Support: For any quality issues, missing parts, or assembly assistance, please contact Nathan James customer support. Your purchase is backed by a 100% money-back guarantee.
Visit the official Nathan James store for more information: Nathan James Store
