TV HearGear User Manual

Introduction

The TV HearGear system provides an enhanced audio experience for television viewing, allowing users to listen to TV audio wirelessly through high-definition earphones. This system is designed to deliver clear sound directly to your ears, offering both an immersive listening experience and the ability to watch TV without disturbing others. It also features an awareness mode to keep you connected to your surroundings.

Image: An elderly couple enjoying television with the TV HearGear system, highlighting its benefit for shared viewing experiences.

What's Included

Your TV HearGear package contains the following components:

• One pair of TV HearGear High-Definition Earphones
• One Bluetooth Transmitter (TV Streamer)
• Necessary Accessories (e.g., charging cable, audio cables)
• User Manual (this document)

Image: Contents of the TV HearGear package, including the Bluetooth transmitter and earphones, emphasizing ease of setup and battery life.

Setup Guide

1. Charging the Earphones

Before first use, fully charge your TV HearGear earphones. Connect the charging cable to the earphones and a USB power source. The indicator light will show charging status and turn off when fully charged. A full charge provides over 8 hours of battery life.

2. Connecting the Transmitter to your TV

The TV HearGear transmitter can connect to your TV using various audio output options. The most common and recommended method for high-quality audio is via the optical audio output.

1. Optical Audio Connection:
   • Locate the "Optical Out" or "Digital Audio Out (Optical)" port on your TV.
   • Connect one end of the optical cable (often included) to this port on your TV.
   • Connect the other end of the optical cable to the "Optical In" port on the TV HearGear transmitter.
   • Ensure the TX/RX switch on the transmitter is set to "TX" (Transmit) mode.
   • Power on the transmitter.
2. Other Connection Options: If optical is not available, consult your TV's manual for alternative audio output options (e.g., RCA, 3.5mm audio jack) and use the appropriate cables with the TV HearGear transmitter.

3. Pairing Earphones with the Transmitter

The earphones and transmitter are designed for easy pairing. Follow these steps:

1. Ensure both the earphones and the transmitter are powered off.
2. Press and hold the power button on the earphones until the indicator light flashes rapidly, indicating pairing mode.
3. Simultaneously, press and hold the Bluetooth pairing button on the transmitter until its indicator light also flashes rapidly.
4. Place both devices close to each other. They should automatically pair within a few seconds. The indicator lights will typically turn solid blue or stop flashing once connected.
5. Once paired, the earphones will automatically connect to the transmitter when both are powered on and within range.

Image: The TV HearGear transmitter and earphones, illustrating the two main components of the system.

Operating Instructions

Power On/Off

• Earphones: Press and hold the power button on the earphone control unit for approximately 3 seconds to power on or off.
• Transmitter: Press the power button on the transmitter to turn it on or off.

Adjusting Volume

Use the volume control buttons (+ and -) located on the earphone control unit to adjust the listening volume.

Image: Detail of the earphone's inline control, showing the volume and Bluetooth buttons for easy access.

Awareness Mode

The TV HearGear features an awareness mode that allows you to hear ambient sounds around you while still enjoying your TV audio. This is useful for staying aware of your surroundings or engaging in conversations without removing your earphones.

• To activate/deactivate awareness mode, press the dedicated awareness mode button on the earphone control unit.
• This mode amplifies external sounds, allowing you to hear low-level sounds and control outside sound coming in.

Image: Visual representation of the 30-foot range and ambient awareness feature, showing how the system allows for environmental sound integration.

Streaming Music and Calls (Smartphone/Tablet)

The TV HearGear earphones are Bluetooth compatible and can be used independently with any Bluetooth-enabled smartphone or tablet for music streaming and calls.

1. Ensure the earphones are not connected to the TV transmitter (power off the transmitter if necessary).
2. Put the earphones into pairing mode (refer to "Pairing Earphones with the Transmitter" section, step 2).
3. On your smartphone or tablet, go to Bluetooth settings and select "TV HearGear" from the list of available devices.
4. Once connected, you can stream audio or make/receive calls through the earphones.

Image: A man enjoying TV with the HearGear earphones, demonstrating comfortable and personal listening.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the earphones and transmitter. Do not use abrasive cleaners or immerse in water.
• Storage: When not in use, store the TV HearGear system in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the earphones frequently. Recharge them regularly, even if not used for extended periods.
• Ear Tips: Periodically check and clean the ear tips to ensure optimal sound quality and hygiene. Replace if damaged or worn.

Troubleshooting

Specifications

Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the documentation provided at the time of purchase or visit the official Etymotic website. Specific warranty terms and support contact details may vary by region and retailer.

Please retain your proof of purchase for any warranty claims.