CooSpo BK467

Download PDF
Contents

COOSPO Bike Cadence Speed Sensor BK467 User Manual

Model: BK467 | Brand: CooSpo

1. Introduction

The COOSPO BK467 is a versatile cycling sensor designed to track either your bike's cadence (pedal revolutions per minute) or speed. It utilizes both Bluetooth and ANT+ wireless technologies, allowing seamless connection with various GPS bike computers and popular cycling applications. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and accurate data tracking during your rides.

COOSPO BK467 Cadence Speed Sensor

Image: The COOSPO BK467 sensor, a compact black device with a gear and crank arm icon, designed for tracking cycling data.

2. Key Features

  • RPM Cycling Sensor: Tracks and provides real-time cycling cadence or speed data to your bike computer or smartphone applications.
  • Dual Connectivity (Bluetooth & ANT+): Connects to one application or device concurrently via Bluetooth, or multiple devices simultaneously via ANT+.
  • Wide App Compatibility: Compatible with most fitness apps, including Zwift, OpenRider, RideWithGPS, Cyclemeter, Peloton, Rouvy, and Coosporide.
  • Compact and Lightweight Design: Weighs only 9.5g, making it easy to install and unobtrusive.
  • Durable and Waterproof: IP67 waterproof rating ensures reliable performance in rainy conditions.
  • Versatile Mode Switching: Easily switch between cadence and speed modes by reinserting the battery.
  • Wireless and Non-Magnetic: Simplifies installation and reduces interference.
COOSPO BK467 Connectivity

Image: The COOSPO BK467 sensor shown alongside various bike computers and app logos (Bluetooth, ANT+, Wahoo, Zwift), illustrating its broad compatibility.

3. Installation and Setup

The BK467 sensor can function as either a cadence sensor or a speed sensor. The mode is determined by how the battery is inserted and where the sensor is mounted.

3.1. Switching Between Cadence and Speed Modes

To switch modes, open the battery cover and reinsert the CR2032 battery. The sensor will indicate its current mode via an LED light:

  • Cadence Mode: A blue LED will light up for three seconds.
  • Speed Mode: A red LED will light up for three seconds.

Note: The sensor cannot operate in both cadence and speed modes simultaneously.

3.2. Cadence Sensor Installation

For cadence tracking, the sensor attaches to the crank arm of your bicycle. Use the provided rubber pad and O-rings to secure it firmly.

Cadence Sensor Installation

Image: A COOSPO sensor installed on a bicycle's crank arm, indicating its use as a cadence sensor.

3.3. Speed Sensor Installation

For speed tracking, the sensor mounts on the wheel hub. Ensure it is securely fastened using the appropriate O-ring size.

Speed Sensor Installation

Image: A COOSPO sensor installed on a bicycle's rear wheel hub, indicating its use as a speed sensor.

3.4. Package Contents

Ensure all components are present in the package:

  • COOSPO BK467 Sensor
  • CR2032 Battery (pre-installed or included)
  • Rubber Pad
  • Various sized O-rings for mounting
  • User Manual
COOSPO BK467 Package Contents

Image: The contents of the COOSPO BK467 sensor package, including the sensor, O-rings, and user manual.

4. Operating Instructions

4.1. App Connection

When connecting the BK467 sensor to a smartphone application, it is crucial to search for the sensor directly within the app itself. Searching through your phone's system Bluetooth settings will not establish a valid connection.

App Connection Method

Image: A diagram illustrating the correct method for connecting the BK467 sensor to a smartphone app (search within the app) versus the incorrect method (searching via phone's Bluetooth settings).

To connect:

  1. Ensure your phone's Bluetooth is enabled.
  2. Open your preferred cycling app (e.g., Coosporide, Zwift, Wahoo).
  3. Navigate to the sensor pairing or device connection section within the app.
  4. Activate the sensor by moving the wheel or crank to wake it up.
  5. Select the BK467 sensor from the list of available devices in the app.
Coosporide App Interface

Image: Screenshots of the Coosporide app interface displaying real-time cycling data such as speed, distance, heart rate, and cadence, with the COOSPO sensor visible.

4.2. GPS Bike Computer Connection

The BK467 sensor is compatible with COOSPO BC107, BC200, CS300, CS500, and other brands that support Bluetooth ANT+ protocol.

To connect:

  1. Turn on your GPS bike computer.
  2. Access the menu and navigate to the 'Add Sensor' option.
  3. Activate the sensor by moving the wheel or crank to wake it up.
  4. Select the BK467 sensor from the list and save the connection.

5. Maintenance

5.1. Battery Replacement

The sensor uses one CR2032 battery. When the battery is low, the sensor's performance may degrade or it may stop transmitting data. To replace the battery:

  1. Carefully open the battery compartment cover.
  2. Remove the old CR2032 battery.
  3. Insert a new CR2032 battery, ensuring correct polarity.
  4. Close the battery compartment cover securely to maintain the waterproof seal.

5.2. Waterproofing

The BK467 sensor has an IP67 waterproof rating, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. This makes it suitable for riding in rainy conditions.

Waterproof Sensor

Image: The COOSPO BK467 sensor covered in water droplets, demonstrating its IP67 waterproof capability.

To maintain waterproofing, ensure the battery cover is always properly sealed after replacement.

5.3. Cleaning

Wipe the sensor with a damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners.

6. Troubleshooting

  • Sensor not connecting to app/device:
    • Ensure the sensor is awake by moving the bike's wheel or crank.
    • For app connections, always search for the sensor within the app itself, not through your phone's system Bluetooth settings.
    • Check if the battery needs replacement.
    • Ensure Bluetooth/ANT+ is enabled on your device.
  • Inaccurate readings:
    • Verify the sensor is securely mounted and not shifting during use.
    • Confirm the sensor is in the correct mode (cadence or speed) for its mounting location.
    • For speed, ensure the wheel circumference is correctly set in your bike computer or app.
  • WAHOO APP limitation: If using the WAHOO APP, it may only support connecting to one COOSPO sensor at a time. This is a known limitation of the Wahoo app for third-party sensors.

7. Technical Specifications

FeatureDetail
Model NumberBK467
Product Dimensions3.99 x 3.48 x 1.19 cm (1.57" x 1.37" x 0.47")
Item Weight9.5 g
Connectivity TechnologyBluetooth, ANT+
Sensor TypeCadence Sensor, Speed Sensor
Battery Type1 CR2032 battery (included)
Battery LifeApproximately 500 hours
Waterproof RatingIP67
ColourBlack
COOSPO BK467 Dimensions and Specs

Image: A visual representation of the COOSPO BK467 sensor's dimensions and a table summarizing its key specifications.

8. Support and Warranty

For product support, technical assistance, or warranty inquiries, please contact COOSPO directly.

Email Support:

Please refer to the official COOSPO website or your purchase documentation for the most up-to-date warranty information.

© 2024 CooSpo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.