1. Introduction
Thank you for choosing the Fenge SD315001WB Height Adjustable Standing Desk. This manual provides essential information for the safe and efficient use of your new desk converter. Please read these instructions carefully before setup and operation, and retain them for future reference.
The Fenge SD315001WB is designed to transform your existing desk into a sit-stand workstation, promoting a healthier and more dynamic work environment. It features a gas spring system for smooth height adjustments and a spacious work surface.
Figure 1: Fenge SD315001WB Height Adjustable Standing Desk with dual monitors and accessories.
2. Safety Information
To ensure safe operation and prevent damage, please observe the following safety guidelines:
- Do not exceed the maximum weight capacity of 15 kg (33 lbs).
- Keep hands and fingers clear of moving parts during height adjustment to avoid pinching.
- Ensure the desk converter is placed on a stable, level surface.
- Distribute weight evenly on the desktop to maintain stability.
- Do not allow children to operate the desk converter without adult supervision.
- Avoid placing hot items directly on the surface without protection.
- Do not attempt to disassemble or modify the gas spring mechanism.
3. Package Contents
Upon opening the package, verify that all components are present and undamaged:
- Fenge SD315001WB Height Adjustable Standing Desk Converter (Main Unit)
- Instruction Manual
The desk converter is largely pre-assembled, requiring minimal setup.
4. Setup
The Fenge SD315001WB is designed for quick and easy setup, as it comes largely pre-assembled. Follow these steps to prepare your workstation:
- Carefully remove the desk converter from its packaging.
- Place the desk converter on a sturdy, flat desk or table. Ensure there is sufficient space around the unit for safe operation and adjustment.
- Confirm that the non-slip feet on the base of the converter are securely in place to prevent movement and protect your underlying desk surface.
- Place your monitor(s), laptop, keyboard, and mouse on the designated surfaces. Ensure cables are managed to prevent snagging during height adjustments.
Figure 2: Key dimensions and features of the Fenge SD315001WB.
5. Operating Instructions
The Fenge SD315001WB features a gas spring system for smooth and effortless height adjustment.
5.1 Adjusting Height
- To raise the desk: Gently squeeze the spring-assisted handle located on the side of the desktop. While holding the handle, lift the desktop to your desired standing height. Release the handle to lock the desk in position.
- To lower the desk: Gently squeeze the spring-assisted handle. While holding the handle, apply slight downward pressure to the desktop to lower it to your desired sitting height. Release the handle to lock the desk in position.
Always ensure that all items on the desk are stable before adjusting the height. The desk can be adjusted between 12.5 cm (minimum) and 51 cm (maximum) from your original desk surface.
Figure 3: Operating the spring-assisted handle for height adjustment.
Figure 4: Height adjustment range from minimum to maximum.
6. Maintenance
Regular maintenance will help prolong the life and appearance of your Fenge standing desk converter.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the melamine veneer.
- Inspection: Periodically check all connections and moving parts for any signs of wear or looseness. Tighten screws if necessary.
- Gas Spring: The gas spring system is designed to be maintenance-free. Do not attempt to lubricate or disassemble it.
7. Troubleshooting
If you encounter any issues with your Fenge standing desk converter, refer to the following common problems and solutions:
- Desk is difficult to raise or lower:
- Ensure you are pressing the handle fully.
- Check if the weight on the desk exceeds the maximum capacity (15 kg). Remove some items if necessary.
- Verify that no cables or objects are obstructing the movement mechanism.
- Desk feels unstable:
- Confirm the desk converter is placed on a flat, stable surface.
- Ensure weight is distributed evenly across the desktop.
- Check that all pre-assembled components are secure.
If the problem persists, please contact Fenge customer support for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model | SD315001WB |
| Brand | Fenge |
| Desktop Workstation Dimensions | L80 x W40 cm (31.5 x 15.7 inches) |
| Keyboard Tray Dimensions | L76 x W30 cm (29.9 x 11.8 inches) |
| Height Adjustment Range | 12.5 cm (Min) to 51 cm (Max) |
| Maximum Weight Capacity | 15 kg (33 lbs) |
| Material | Engineered Wood (MDF) with Melamine Veneer |
| Item Weight | 12.3 kg (27.1 lbs) |
| Special Features | Adjustable, Gas Spring System, Non-slip Feet, Cable Management |
| Assembly Required | Minimal (Preassembled) |
9. Warranty and Support
Fenge products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Fenge website.
If you have any questions, require technical support, or need assistance with parts, please contact Fenge customer service through the retailer where you purchased the product or via the contact information provided on the Fenge official website.
