Bestier 113-094

Download PDF
Contents

Bestier L-Shaped Gaming Desk User Manual

Model: 113-094

1. Setup and Assembly

This section provides detailed instructions for assembling your Bestier L-Shaped Gaming Desk. It is recommended to have two people for assembly to ensure stability and ease of construction. Please ensure all parts are present before beginning.

1.1 Unpacking and Part Identification

Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the included parts list to identify each piece.

Product dimensions and weight capacities

Image 1.1: Product dimensions and weight capacities for each section of the desk.

1.2 Assembly Steps

Follow these steps in order for proper assembly:

  1. Step 1: Assemble the Desk Legs. Attach the crossbars to the main leg frames using the specified screws. Ensure all connections are secure.
  2. Assembly step 1: Attaching crossbars to desk legs

    Image 1.2: Illustration of attaching crossbars to the desk legs using screws (E x 4).

  3. Step 2: Connect the Desk Frames. Secure the two main desk frames together using the provided connectors and screws.
  4. Assembly step 2: Connecting desk frames

    Image 1.3: Illustration of connecting the two desk frames with screws (C x 4).

  5. Step 3: Install the Corner Piece. Place the curved corner piece onto the connected frames and secure it from underneath with screws.
  6. Assembly step 3: Installing the corner piece

    Image 1.4: Illustration of securing the corner piece to the frame with screws (A x 3).

  7. Step 4: Attach the Side Panels. Carefully place the rectangular side panels onto the frames, aligning the pre-drilled holes. Secure them from underneath.
  8. Assembly step 4: Attaching side panels

    Image 1.5: Illustration of securing the side panels to the frame with screws (B x 4).

  9. Step 5: Install Headset Hook and Cup Holder. Attach the headset hook and cup holder to the designated locations on the desk edge using the smaller screws.
  10. Assembly step 5: Attaching headset hook and cup holder

    Image 1.6: Illustration of attaching the headset hook and cup holder with screws (E x 4).

  11. Step 6: Assemble the Monitor Stand Frame. Connect the support bars for the monitor stand.
  12. Assembly step 6: Assembling monitor stand frame

    Image 1.7: Illustration of assembling the monitor stand frame with screws (C x 2).

  13. Step 7: Attach the Monitor Stand Shelf. Place the monitor stand shelf onto the assembled frame and secure it from underneath.
  14. Assembly step 7: Attaching monitor stand shelf

    Image 1.8: Illustration of securing the monitor stand shelf with screws (A x 2, B x 2).

  15. Step 8: Connect RGB Strip Light. Attach the RGB LED strip light to the underside of the monitor stand. Connect the USB cable to a power source.

1.3 Desk Configuration Options

The L-shaped desk can be configured in multiple ways to suit your space and needs:

  • L-Shape Configuration: Standard corner setup for maximizing space.
  • Long Desk Configuration: The two main desk sections can be arranged side-by-side to form a long, straight desk.
  • Two Separate Desks: The desk can be split into two independent workstations.
Three different setup configurations for the L-shaped desk

Image 1.9: Visual representation of the three possible desk configurations.

2. Operating Features

2.1 RGB LED Strip Light

The integrated RGB LED strip light offers customizable lighting to enhance your environment. It features:

  • 7 main color options.
  • 20 dynamic modes for various lighting effects.

Control the light settings using the inline controller on the USB cable. Plug the USB connector into any standard USB power adapter or port.

RGB LED strip light with controller, headset hook, and cup holder features

Image 2.1: Close-up of the RGB light strip, headset hook, and cup holder.

2.2 Removable Monitor Stand

The elevated monitor stand provides an ergonomic viewing height for your display. It is designed to accommodate wider computer monitors and can be removed if not needed.

2.3 Multi-Function Hooks and Cup Holder

Utilize the removable cup holder to keep beverages secure and the headset hook to store your headphones, helping to maintain a tidy and organized desktop.

2.4 Anti-Case Tilt Design

The V-shaped groove design on the desk surface helps prevent your computer tower or other items from sliding or tilting, providing added stability.

3. Maintenance

Proper care and maintenance will extend the life and appearance of your desk.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
  • Spills: Immediately wipe up any spills to prevent staining or damage to the desk surface.
  • Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten as necessary.
  • Heat Protection: Use coasters or protective pads under hot items to prevent heat damage to the desktop.
Premium kid and pet-friendly materials: heat-resistant, waterproof, anti-scratching

Image 3.1: The desk is constructed from CARB P2 grade particle board, offering heat-resistant, waterproof, and anti-scratching properties.

4. Troubleshooting

If you encounter any issues with your Bestier L-Shaped Gaming Desk, please refer to the following common solutions:

  • Desk Wobbles: Ensure all screws are securely tightened. Check that the desk is placed on a level surface. Adjust the leveling feet if present.
  • RGB Light Not Working: Verify that the USB cable is properly connected to a functioning power source. Check the inline controller for any loose connections or damage.
  • Missing Parts: If any parts are missing upon unpacking, please contact Bestier customer support immediately for assistance.
  • Difficulty Assembling: Review the assembly instructions carefully. Ensure you are using the correct screws for each step. Do not force parts together. If issues persist, contact customer support.

5. Specifications

FeatureDetail
BrandBestier
Model Number113-094
ShapeL-Shape
Desk DesignComputer Desk
Product Dimensions (D x W x H)55.2"D x 55.2"W x 30"H
ColorGray
StyleModern
Base MaterialMetal
Top Material TypeWood (CARB P2 grade particle board)
Special FeatureReversible, RGB Strip Light, Removable Monitor Stand, Headset Hook, Cup Holder
Item Weight22.6 Kilograms
Maximum Weight Recommendation250 Pounds
Required AssemblyYes
Recommended Number of People for Assembly2
Includes All Assembly ToolsYes (Phillips screwdriver may also be needed)

6. Warranty & Support

6.1 Limited Warranty

This Bestier product comes with a limited warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. The warranty covers manufacturing defects under normal use.

6.2 Customer Support

For any product issues, missing parts, or assembly assistance, please contact Bestier customer service. Our team is dedicated to providing excellent support and satisfactory solutions.

Bestier customer support team ready to assist

Image 6.1: Bestier customer support is available to assist with product inquiries.

You can typically find contact information on the Bestier official website or through your purchase platform.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.