1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.
Figure 1: Complete Lepro LED Strip Lights Kit
2. Package Contents
Verify that all components are present in the package:
- 2 x 16.4ft (5m) RGB LED Strip Lights
- 1 x 44-Key IR Remote Control
- 1 x 12V Power Adapter
- 1 x Control Box (IR Receiver)
3. Installation and Setup
Follow these steps for proper installation:
- Prepare the Surface: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
- Measure and Cut (Optional): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
- Attach the Strip: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
- Connect Components:
- Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
- Connect the 12V power adapter to the control box.
- Plug the power adapter into a standard electrical outlet.
- Activate Remote: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Figure 2: Connection Diagram for LED Strip Lights
For a visual guide on installation and various applications, please refer to the official product video below:
Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.
4. Operating Instructions
The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.
Figure 3: 44-Key IR Remote Control Layout
Remote Control Functions:
- On/Off: Power button to turn the lights on or off.
- Brightness Adjustment: Up/Down arrows to increase or decrease brightness.
- Color Selection: 20 preset static colors, including Red, Green, Blue, and White.
- DIY Colors: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- Dynamic Modes: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.
5. Maintenance
To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:
- Cleaning: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- Environment: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
- Adhesive Care: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.
6. Troubleshooting
If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. |
|
|
| Remote control not working. |
|
|
| Some LEDs show incorrect color or are off. |
|
|
| LED strip falls off surface. |
|
|
7. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Lepro |
| Model Number | 410084-RGB-US-NF-a |
| Color | RGB (Red, Green, Blue) |
| Indoor/Outdoor Usage | Indoor |
| Special Feature | Dimmable |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Material | Copper, Plastic |
| Controller Type | Remote Control |
| Number of Light Sources | 300 (total for 32.8ft) |
| Voltage | 12 Volts |
| Wattage | 36 watts |
| Item Weight | 0.33 Kilograms (11.6 ounces) |
| Item Length | 32.8 Feet (2 x 16.4ft) |
8. Warranty Information
This product is covered by a 2-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
9. Customer Support
For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.
