1. Introduction
Thank you for choosing the Storkcraft Portofino All-in-One Convertible Crib & Changer. This versatile furniture piece is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed. It features an attached changing table with integrated storage, providing convenience and functionality for your nursery. This product is GREENGUARD Gold Certified and JPMA Certified, ensuring it meets stringent safety and air quality standards.

This image displays the complete Storkcraft Portofino All-in-One Convertible Crib & Changer in Pebble Gray, showcasing its integrated design.
2. Important Safety Information
Please read all instructions carefully before assembly and use of this product. Failure to follow these warnings and instructions could result in serious injury or death.
- Always keep all small parts, including hardware, away from children during assembly.
- Regularly inspect the crib and changer for damaged hardware, loose joints, missing parts, or sharp edges. Do not use if any parts are missing or broken. Contact Storkcraft Customer Care for replacement parts. Do not substitute parts.
- This crib is intended for use with a standard full-size crib mattress (sold separately). Ensure the mattress fits snugly without gaps.
- The adjustable mattress support base has 4 different height options. Always use the lowest position once your child can sit up unaided.
- This crib may only be used until your child can easily climb out or is taller than 35 inches (89 cm).
- The changing table has a maximum weight recommendation of 50 pounds. Never leave a child unattended on the changing table. Always use the safety strap provided.
- GREENGUARD Gold Certified products are screened for more than 10,000 chemicals and VOCs known to pollute indoor air.
- JPMA Certified: Expert tested by third-party, accredited laboratories to meet or exceed all applicable category voluntary and mandatory safety standards.
3. Assembly Instructions (Setup)
Assembly is required for this product. We recommend two adults for assembly. Clear a spacious area for assembly and ensure all parts are present before beginning.
Included Components:
- All necessary parts for the crib and changer
- Hardware pack
- Assembly Instructions manual
- Water-resistant changing pad with safety strap
General Assembly Steps:
- Unpack all components and verify against the parts list in your included manual.
- Begin by assembling the changing table section, including the drawers and shelves.
- Attach the crib side panels to the end panels.
- Secure the mattress support base at the desired height.
- Connect the assembled changing table to the crib structure.
- Ensure all bolts and screws are securely tightened. Do not overtighten.

A front perspective of the Storkcraft Portofino Crib and Changer, highlighting the crib section and the attached changing table with drawers.
4. Operating Instructions
Crib Mode
The Storkcraft Portofino functions as a secure sleeping environment for your infant. Ensure a standard full-size crib mattress (sold separately) is placed on the adjustable mattress support base.
Adjusting Mattress Height
The mattress support base offers 4 adjustable height options. To adjust, remove the mattress and carefully lower or raise the support base to the desired position, securing it with the appropriate hardware. Always use the lowest position once your child can sit up unaided to prevent climbing out.
Changer Functionality
The attached changing table includes a waterproof changing pad and safety strap. Utilize the three enclosed storage drawers and two open shelves for convenient access to diapers, wipes, and other essentials.

A detailed view of the changing table section of the Storkcraft Portofino, showing the changing pad, storage, and GREENGUARD Gold certification label.
Conversions
The Portofino crib is designed for long-term use and can be converted into:
- Toddler Bed: Remove the front crib rail and install a toddler safety guardrail (sold separately).
- Daybed: Remove the front crib rail. No guardrail is used for this configuration.
- Full-Size Bed: Utilize the crib's headboard and optional footboard with a compatible Storkcraft full-size bed conversion kit (sold separately).

The Storkcraft Portofino Crib shown in its toddler bed configuration, demonstrating the transition with a safety guardrail.

The Storkcraft Portofino Crib shown in its daybed configuration, providing a comfortable seating or sleeping option.

The Storkcraft Portofino Crib converted into a full-size bed, illustrating its long-term adaptability.
Refer to the specific conversion instructions included with your product for detailed steps.
5. Maintenance and Care
Cleaning
To clean the crib and changer, wipe surfaces with a damp cloth. Avoid using abrasive cleaners or strong chemicals, as these can damage the finish.
Regular Inspection
Periodically check all screws, bolts, and other hardware to ensure they are tight and secure. Loose hardware can compromise the safety and stability of the product. Do not overtighten.
Storage
If storing conversion parts for future use, keep them in a dry, safe place, clearly labeled, to prevent loss or damage.
6. Troubleshooting
If you encounter any issues with your Storkcraft Portofino Crib & Changer, please refer to the following common troubleshooting tips:
- Loose Parts: If any part feels wobbly or loose, re-tighten all associated hardware. Avoid overtightening to prevent stripping screws or damaging wood.
- Squeaking: Squeaking can often be resolved by ensuring all bolts are properly tightened. If squeaking persists, disassemble and reassemble the affected section, ensuring all components are correctly aligned.
- Difficulty with Conversions: Ensure you have all the correct conversion kits and guardrails (sold separately) for the desired configuration. Follow the specific conversion instructions provided with your product carefully.
- Missing or Damaged Parts: Do not attempt to use the product with missing or damaged parts. Contact Storkcraft Customer Care immediately for assistance and replacement parts.
7. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | 04586-47F |
| Color | Pebble Gray |
| Brand | Storkcraft |
| Product Dimensions (L x W x H) | 70.78" x 32.91" x 43.11" |
| Item Weight | 125 Pounds |
| Material | High-quality pine wood and composites |
| Furniture Finish | Pine |
| Special Feature | Convertible (5-in-1) |
| Maximum Weight Recommendation (Changer) | 50 Pounds |
| Maximum Height Recommendation (Crib) | 35 Inches (89 cm) |
| Certifications | GREENGUARD Gold Certified, JPMA Certified |
| UPC | 810003665546 |

A technical diagram illustrating the length, width, and height dimensions of the Storkcraft Portofino All-in-One Convertible Crib & Changer.
8. Warranty Information
The Storkcraft Portofino All-in-One Convertible Crib & Changer is backed by a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty details, refer to the documentation included with your product or contact Storkcraft Customer Care.
9. Customer Support
Should you have any questions, require assistance with assembly, or need to order replacement parts, please contact the Storkcraft Customer Care team. Our dedicated team is available to provide support and ensure your satisfaction with our products.
Contact information can be found on the Storkcraft website or in the documentation provided with your purchase.