1. Introduction
Thank you for choosing the ATO 20W Portable Rechargeable LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read these instructions carefully before use and retain them for future reference.
Figure 1: ATO 20W Portable Rechargeable LED Work Light. This image shows the work light in its upright position, featuring a yellow frame, black light housing, and a padded handle.
2. Safety Information
- Do not look directly into the LED light when it is on, as this may cause eye damage.
- Keep the device away from extreme temperatures, direct sunlight, and corrosive environments.
- Ensure the charging port is dry before connecting the charging cable.
- Do not attempt to disassemble or modify the work light. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Dispose of the battery and product according to local regulations.
3. Package Contents
Verify that all items are present in the package:
- 1 x ATO 20W Portable Rechargeable LED Work Light
- 1 x Charging Cable (USB)
- 1 x User Manual
4. Product Features
- Portable & Flexible: Features a non-slip sponge handle for comfortable carrying and a 360-degree adjustable lamp stand for versatile positioning.
- Bright Light: Provides high color illumination with no flicker, no eye damage, low consumption, and high energy saving.
- Magnetic Base: Equipped with a magnetic base to prevent vibration from slipping, allowing secure attachment to metal surfaces.
- Long Life Span: Offers up to four hours of working time after a full charge, with an estimated LED life span of 50,000 hours.
- Durable Design: Constructed with tempered glass and a waterproof design for enhanced durability.
Figure 2: Flexibility of the work light. This image illustrates the 360-degree horizontal rotation and 270-degree vertical tilt capabilities of the light head on its stand.
Figure 3: Key features of the work light. This image details the comfortable sponge handle, the strong magnetic base for secure placement, and the convenient charging port.
5. Setup
- Unpack: Carefully remove the work light and all accessories from the packaging.
- Initial Charge: Before first use, fully charge the work light. Connect the provided USB charging cable to the charging port on the light and to a compatible USB power adapter (not included). The charging indicator will show the charging status.
- Positioning: Place the work light on a stable, flat surface. Adjust the lamp stand to achieve the desired angle. For hands-free operation, utilize the magnetic base to attach the light to any suitable metal surface.
6. Operating Instructions
- Power On/Off: Locate the power button, typically on the back or side of the light housing. Press the button once to turn the light on. Press it again to cycle through different lighting modes (if available) or to turn it off.
- Adjusting Light Angle: Loosen the adjustment knobs on the side of the lamp stand to tilt the light head vertically. Tighten the knobs to secure the desired angle. The entire light can be rotated 360 degrees horizontally on its base.
- Charging: When the battery is low, connect the charging cable as described in the Setup section. A full charge provides up to four hours of continuous use.
Figure 4: Versatile applications. This image displays the work light being used in various scenarios such as camping, car repair, construction, and emergency lighting.
7. Maintenance
- Cleaning: Wipe the exterior of the work light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the work light in a cool, dry place when not in use. Ensure it is fully charged before long-term storage to preserve battery life.
- Battery Care: To maximize battery longevity, avoid completely draining the battery frequently. Recharge the light regularly, even if not in constant use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Battery is depleted | Charge the work light fully. |
| Light is dim | Low battery | Recharge the work light. |
| Light does not charge | Charging cable or adapter faulty | Try a different USB charging cable or power adapter. Ensure connections are secure. |
| Magnetic base not holding | Surface is not magnetic or too thin | Ensure the surface is ferrous metal and thick enough to provide sufficient magnetic adhesion. |
9. Specifications
| Feature | Detail |
|---|---|
| Wattage | 20 watts |
| Light Source Type | LED |
| Power Source | Battery Powered |
| Material | Tempered glass (shade), Metal (frame) |
| Finish Type | Magnetic |
| Mounting Type | Portable, Magnetic |
| Product Dimensions | 7.68"L x 7.48"W x 5.91"H |
| Special Features | Tempered-Glass, Waterproof |
| Estimated Life Span | 50,000 hours |
| UPC | 782948073147 |
| ASIN | B089M3CRCT |
10. Warranty and Support
ATO is committed to customer satisfaction. If you encounter any issues with your product or have questions regarding its operation, please do not hesitate to contact us. We aim to respond to all inquiries within 12 hours.
For support, please refer to the contact information provided at the point of purchase or visit the official ATO store online.
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.