1. Introduction
This instruction manual provides comprehensive guidance for the proper installation, operation, and maintenance of your Quad Lock Car Mount (Model QLM-CAR-5). Designed for secure smartphone mounting in vehicles, this product offers a reliable solution for accessing your device while driving. Please read this manual thoroughly before use to ensure optimal performance and safety.
2. Safety Information
- Ensure the mount is securely attached and does not obstruct your view of the road or interfere with vehicle controls (airbags, dashboard indicators, etc.).
- Do not attempt to install or adjust the mount while driving. Always pull over to a safe location before making any adjustments.
- Verify that your smartphone is securely locked into the mount before driving.
- Avoid placing the mount in direct sunlight for extended periods when not in use, as extreme temperatures may affect the adhesive properties of the suction cup.
3. Product Components
The Quad Lock Car Mount package typically includes the following:
- Quad Lock Car Mount (QLM-CAR-5)
- Dashboard Pad (if included with your specific model for dashboard mounting)
Note: Quad Lock Cases and Universal Adapters are sold separately and are required for use with this mount.
Figure 3.1: The Quad Lock Car Mount (QLM-CAR-5).
4. Setup and Installation
The Quad Lock Car Mount can be securely attached to your windshield or a flat, smooth dashboard surface using its industrial-strength suction cup and sticky gel base.
4.1 Surface Preparation
- Choose a clean, flat, and smooth surface on your windshield or dashboard that does not obstruct your view or interfere with vehicle operation.
- Clean the chosen surface thoroughly with a glass cleaner or alcohol wipe and allow it to dry completely.
- If mounting on a dashboard, ensure the surface is suitable for adhesive application. For textured dashboards, use the provided dashboard pad (if applicable) or consider windshield mounting.
4.2 Attaching the Mount
- Remove the protective film from the suction cup's sticky gel base.
- Press the suction cup firmly against the prepared surface.
- While maintaining pressure, push the lever down to engage the suction mechanism and create a vacuum seal. Ensure the mount is firmly secured.
Figure 4.1: The Quad Lock Car Mount securely installed on a vehicle's windshield.
5. Operating Instructions
5.1 Attaching Your Smartphone
- Ensure your smartphone is equipped with a compatible Quad Lock Case or Universal Adapter.
- Align the Quad Lock mechanism on your phone case with the mounting head on the car mount.
- Press the phone onto the mount and twist clockwise until you hear a click, indicating it is securely locked.
Figure 5.1: Attaching a smartphone to the Quad Lock Car Mount by twisting it into place.
Figure 5.2: Smartphone securely mounted in portrait orientation.
5.2 Detaching Your Smartphone
- To remove your smartphone, press down on the blue lever located on the mounting head.
- While holding the lever down, twist your smartphone counter-clockwise to unlock and remove it from the mount.
Figure 5.3: Smartphone detached from the mount, ready for use.
5.3 Adjusting Viewing Angle
The mount features a fully adjustable swivel ball for 360-degree rotation. Loosen the adjustment ring (if present) or gently rotate the phone to achieve your preferred viewing angle in either portrait or landscape orientation. Tighten the adjustment ring to secure the position.
6. Maintenance
- Cleaning the Suction Cup: If the suction cup's sticky gel base loses adhesion, rinse it with warm water and let it air dry. Do not use harsh chemicals or abrasive materials.
- General Cleaning: Wipe the mount with a soft, damp cloth. Avoid submerging the unit in water.
- Storage: When not in use for extended periods, store the mount in a cool, dry place away from direct sunlight.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount does not stick to surface. | Surface is dirty, textured, or suction cup is dirty/damaged. | Clean the mounting surface and the suction cup. Ensure the surface is smooth and flat. Re-engage the suction lever firmly. |
| Smartphone does not lock securely. | Phone case not properly aligned or not a genuine Quad Lock product. | Ensure the Quad Lock mechanism on your phone case is correctly aligned with the mount. Twist firmly until a click is heard. Verify you are using an authentic Quad Lock Case or Universal Adapter. |
| Mount falls off during driving. | Improper installation or extreme temperature fluctuations. | Re-install the mount following the "Setup and Installation" steps carefully. Ensure the suction cup and surface are clean. Avoid extreme heat or cold if possible. |
8. Specifications
- Model Number: QLM-CAR-5
- Product Dimensions: 3.94 x 1.57 x 0.98 inches
- Item Weight: 0.64 ounces
- Color: Black
- Manufacturer: Quad Lock
- Compatible Devices: Smartphones (with Quad Lock Case or Universal Adapter)
- Mounting Type: Dashboard / Windshield (Suction Cup)
- Special Features: Adjustable, Wireless Charging (with optional Wireless Charging Head)
9. Warranty and Support
For warranty information, product support, or to purchase additional accessories, please visit the official Quad Lock website or contact their customer service directly. Retain your proof of purchase for warranty claims.
Official Quad Lock Website: www.quadlockcase.com
