Product Overview
The Avalon B8BLK is a countertop touchless bottleless water cooler designed to provide instant access to crisp cold and piping hot filtered water. This unit connects directly to your water line, eliminating the need for heavy water bottles. It features a dual-stage filtration system and is NSF Certified and UL Approved for safety and quality.
Figure 1: Front view of the Avalon B8BLK Countertop Water Cooler.
Included Components
Your Avalon B8BLK water cooler package includes the following:
- Avalon B8BLK Water Cooler Unit
- Full Installation Kit: 20' of 1/4" tubing, 3-way plastic 1/4" push connect adapter, under-sink 3/8" adapter with shut-off valve, filter flushing adapter.
- Dual Filtration System: Sediment filter (Avalon A5FILTER) and Carbon Block filter (Avalon A4FILTER).
- Detailed instructions with illustrations.
Figure 2: Visual representation of the water cooler unit, installation kit, and dual filters included.
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your water cooler. Follow these steps carefully.
Pre-Installation
- Ensure the unit is placed on a stable, level countertop.
- Allow the unit to stand upright for 24 hours before first use to allow refrigerants to settle.
- Locate a suitable cold water line connection under your sink.
Connecting to Water Supply
- Turn off the cold water supply to your sink.
- Use the provided 3/8" adapter with shut-off valve to tap into your cold water line under the sink.
- Connect the 1/4" tubing from the installation kit to the adapter.
- Route the tubing to the back of the water cooler unit.
- Connect the tubing to the water inlet on the back of the unit.
Filter Installation and Flushing
The dual filtration system consists of a Sediment filter (Stage 1) and a Carbon Block filter (Stage 2). These filters are designed to last 6 months or 1500 gallons.
- Install the Sediment filter first, followed by the Carbon Block filter, into their respective housings on the unit.
- Before initial use, flush the filters using the provided filter flushing adapter. This removes any manufacturing dust or impurities.
- Run several gallons of water through the system until the water runs clear and tastes fresh.
Video 1: Detailed animation demonstrating the installation process for the countertop water cooler.
Video 2: Overview of the Avalon Countertop Self-Cleaning Bottleless Water Cooler, including hot and cold water features and NSF certification.
Operating Instructions
Your Avalon B8BLK water cooler offers both hot and cold water dispensing options.
Dispensing Cold Water
- Place your cup or bottle under the blue cold water spout.
- Push the blue lever to dispense cold water. Release the lever to stop.
Dispensing Hot Water (Child Safe Feature)
- Place your cup or bottle under the red hot water spout.
- To activate the hot water, first slide the child safety lock located on the red lever.
- While holding the safety lock, push the red lever to dispense hot water. Release both to stop.
- The hot water spout is designed with a child safety lock to prevent accidental burns.
Figure 3: The Avalon B8BLK water cooler seamlessly integrated into a modern kitchen environment.
Maintenance
Regular maintenance ensures the longevity and hygiene of your water cooler.
Filter Replacement
- The Sediment (A5FILTER) and Carbon Block (A4FILTER) filters should be replaced every 6 months or after 1500 gallons of use, whichever comes first.
- Refer to the detailed instruction manual for specific steps on how to replace the filters.
- Always flush new filters before regular use.
Cleaning
- Regularly wipe down the exterior of the unit with a soft, damp cloth.
- Clean the drip tray as needed to prevent water overflow and maintain hygiene.
Figure 4: Rear view of the water cooler, illustrating the filter connections and power switches.
Troubleshooting
If you encounter any issues with your water cooler, refer to the following common troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| No water dispensing | Water supply turned off; clogged filter; kinked water line. | Check water supply valve; replace filters; inspect water line for kinks. |
| Water not hot/cold enough | Heating/cooling switches off; unit recently plugged in. | Ensure heating/cooling switches on the back are activated; allow 1-2 hours for water to reach desired temperature after initial setup or power cycle. |
| Leaking | Loose connections; damaged tubing/filters. | Check all water line connections for tightness; inspect tubing and filters for damage and replace if necessary. |
| Unusual taste/odor | New filters not flushed; old filters. | Flush new filters thoroughly; replace old filters. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | B8BLK |
| Color | Black |
| Material | Plastic |
| Product Dimensions | 12"D x 13"W x 19"H |
| Item Weight | 30 pounds |
| Wattage | 420 watts |
| Installation Type | Countertop, Under Sink |
| Upper Temperature Rating (Hot) | 185 Degrees Fahrenheit |
| Lower Temperature Rating (Cold) | 47 Degrees Fahrenheit |
| Filter Capacity | 1500 Gallons |
| Certifications | NSF Certified, UL Approved, Energy Star Approved |
Figure 5: Dimensions of the Avalon B8BLK water cooler.
Warranty and Support
Warranty Information
The Avalon B8BLK water cooler comes with a 1-year manufacturer's warranty.
Customer Support
For further assistance, troubleshooting, or to purchase replacement parts and filters, please visit the official Avalon Store or contact customer service.
- Avalon Store: Visit the Avalon Store
