Important Safeguards
When using electrical appliances, basic safety precautions should always be followed, including the following:
- Read all instructions before operating this appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock, do not immerse cord, plugs, or the base of the percolator in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
Product Overview
The Homecraft HCPC10SS 10-Cup Stainless Steel Coffee Maker Percolator efficiently brews up to 10 cups of rich, great-tasting coffee in minutes. It features an automatic keep warm function and an LED indicator light to signal when coffee is ready. The reusable stainless steel filter basket eliminates the need for paper filters, making it easy to clean.
Components and Features

Figure 1: Labeled components of the Homecraft Percolator.
- 10-Cup Capacity: Brews enough coffee for small gatherings or daily use.
- Durable Stainless Steel Construction: Ensures longevity and keeps coffee piping hot for hours.
- No Paper Filter Needed: Equipped with an easy-to-clean stainless steel filter and perk tube.
- Keep Warm Function: Automatically keeps coffee at the perfect serving temperature.
- Easy-Pour Spout: Designed for spill-free serving.
- LED Indicator Light: Illuminates when brewing is complete and coffee is ready.
- Cool-Touch Handle: Designed for safe transport and pouring.

Figure 2: Key features of the Homecraft Percolator.
Before First Use
Before using your percolator for the first time, wash all removable parts (percolator basket, perk tube, and lid) in warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the percolator with a damp cloth.
Operating Instructions
Brewing Coffee

Figure 3: Homecraft 10-Cup Percolator ready for use.
- Fill with Water: Remove the lid, perk tube, and filter basket. Fill the percolator with cold, fresh water to your desired level, corresponding to the number of cups you wish to brew. Do not fill above the MAX fill line.
- Add Coffee Grounds: Place the perk tube into the percolator, ensuring it is securely seated in the heating element. Place the filter basket onto the perk tube. Add your preferred amount of ground coffee into the filter basket. For best results, use coarse to medium-coarse grounds to minimize sediment.
- Assemble: Place the lid securely on the percolator.
- Start Brewing: Plug the percolator into a standard electrical outlet. The LED indicator light will illuminate, indicating that brewing has begun.
- Brewing Process: Water will heat up and perk through the coffee grounds. The percolator will automatically stop brewing when the coffee is ready, and the LED indicator light will change or turn off (depending on model, typically blue for ready).
- Serve: Carefully remove the lid, perk tube, and filter basket. Pour the freshly brewed coffee into your cup using the easy-pour spout.
Note:
- Too coarse a grind, too little coffee, or insufficiently tamping the grounds before brewing can all lead to inadequate pressure for a proper brew.
- The amount of espresso extracted will vary depending on the grind size and amount, and reprogramming may be needed when the size and amount are adjusted.
Official Product Videos
Video 1: HomeCraft HCPC10SS 10-Cup Percolator in action, demonstrating brewing and pouring.
Video 2: HomeCraft HCPC10SS 10-Cup Coffee Percolator showcasing its features and ease of use.
Keep Warm Function
After the brewing cycle is complete, the Homecraft Percolator automatically switches to a 'keep warm' mode. The LED indicator light will typically change color (e.g., from red to blue) or turn off to signify that the brewing is finished and the coffee is being kept warm at an optimal serving temperature.

Figure 4: The percolator keeps coffee warm for extended periods.
Cleaning and Maintenance
Daily Cleaning
- Always unplug the percolator and allow it to cool completely before cleaning.
- Remove the lid, perk tube, and filter basket. Discard any used coffee grounds.
- Wash the perk tube, filter basket, and lid in warm, soapy water. Rinse thoroughly and dry.
- Wipe the interior and exterior of the percolator with a damp cloth. Do not immerse the percolator base in water or any other liquid.
- Ensure all parts are completely dry before reassembling or storing.
Deep Cleaning / Descaling
Over time, mineral deposits can build up inside the percolator, affecting performance and coffee taste. Descale your percolator regularly (e.g., monthly or bi-monthly, depending on water hardness).
- Fill the percolator with a solution of equal parts white vinegar and water.
- Place the perk tube and filter basket (empty) back into the percolator.
- Plug in the percolator and allow it to complete a full brewing cycle with the vinegar solution.
- After the cycle, unplug and let the solution sit in the percolator for about 20-30 minutes.
- Pour out the vinegar solution and rinse the interior thoroughly with fresh water several times.
- Run two full cycles with fresh water only to remove any residual vinegar taste.

Figure 5: Internal components of the percolator, including the stainless steel filter basket.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Coffee is too weak | Too little coffee grounds; coffee grind is too coarse; insufficient tamping. | Increase amount of coffee grounds; use a finer grind; ensure grounds are properly tamped. |
| Coffee is too strong | Too many coffee grounds; coffee grind is too fine. | Reduce amount of coffee grounds; use a coarser grind. |
| Grounds in coffee | Coffee grind is too fine; filter basket not properly seated. | Use a coarser grind; ensure filter basket is securely placed on the perk tube. |
| Percolator not brewing | Not plugged in; power outlet issue; internal components not assembled correctly. | Check power connection; try a different outlet; reassemble perk tube and filter basket correctly. |
| LED light not working | Appliance not powered; light malfunction. | Ensure unit is plugged in and turned on. If still not working, contact customer support. |
Specifications
| Specification | Detail |
|---|---|
| Brand | Homecraft |
| Model Number | HCPC10SS |
| Capacity | 10 Cups |
| Coffee Maker Type | Percolator |
| Material | Stainless Steel |
| Filter Type | Reusable Stainless Steel |
| Product Dimensions (D x W x H) | 9.65" x 9.65" x 15.94" |
| Item Weight | 3.16 pounds |
| Coffee Input Type | Ground Coffee |
| Country of Origin | China |
| UPC | 082677060525 |

Figure 6: Product dimensions.
Warranty and Support
This Homecraft product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official Homecraft website for specific warranty terms and conditions.
For further assistance, troubleshooting, or to access a downloadable PDF version of this user manual, please visit the Homecraft support page or refer to the official user manual document:





