Luxul P40 Dual Band Wireless Range Extender Instruction Manual

1. Introduction

The Luxul P40 AC1200 WiFi Bridge + Range Extender is designed to expand the coverage of your existing wireless network. It offers two primary operational modes: a bridge link for connecting Ethernet-enabled devices to your WiFi network, and a range extender to eliminate wireless dead zones. This device is compact, plugs directly into a standard power outlet, and is suitable for both home and small office environments. It supports 802.11ac technology, providing speeds up to 1200Mbps (300Mbps on 2.4GHz and 867Mbps on 5GHz), and is backward compatible with 802.11a/b/g/n devices.

2. Safety Information

• Do not expose the device to water or excessive humidity.
• Do not attempt to open or repair the device yourself. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the device. Do not block ventilation openings.
• Use only the power source specified for this device.
• Keep the device away from heat sources and direct sunlight.

3. Package Contents

Verify that your package contains the following items:

• Luxul P40 Dual Band Wireless Range Extender
• Ethernet Cable

4. Device Overview

Familiarize yourself with the physical features of your Luxul P40 device.

This image displays the Luxul P40 device. The front panel features LED indicators for 5G, 2.4G, LAN, Client, Repeater, and Power (PWR). Below the LEDs is a circular button labeled 'LEDs/Reset'. The bottom of the device includes an Ethernet port and power prongs for wall outlet connection.

LED Indicators

• 5G: Indicates activity on the 5GHz wireless band.
• 2.4G: Indicates activity on the 2.4GHz wireless band.
• LAN: Indicates activity on the Ethernet (LAN) port.
• Client: Illuminates when the device is operating in Client (Bridge) mode.
• Repeater: Illuminates when the device is operating in Repeater (Range Extender) mode.
• PWR (Power): Indicates the device is powered on.

Buttons and Ports

• LEDs/Reset Button: A multi-function button. A short press may toggle LED status (if supported). A long press (typically 10-15 seconds) will reset the device to factory default settings.
• Ethernet Port: Used for connecting wired devices in Bridge mode or for initial setup.
• Power Prongs: For direct connection to a standard electrical outlet.

5. Setup

The Luxul P40 can be configured as a Wireless Range Extender (Repeater Mode) or a Wireless Bridge (Client Mode). The setup process typically involves connecting the device to power, accessing its web-based interface, and configuring the desired mode.

Initial Power-Up

1. Plug the Luxul P40 into a standard electrical outlet in a central location, ideally halfway between your wireless router and the area where you need extended coverage.
2. Wait for the PWR LED to illuminate, indicating the device is powered on.

Configuration (General Steps)

Specific configuration steps may vary. Refer to the full user manual available on the Luxul website for detailed instructions. Generally, the process involves:

1. Connect a computer to the P40 via an Ethernet cable, or connect wirelessly to the P40's default Wi-Fi network (SSID and password usually found on a label on the device).
2. Open a web browser and navigate to the P40's default IP address (e.g., 192.168.0.1 or luxul.extender). Consult the device label or manufacturer's documentation for the exact address.
3. Log in using the default username and password (also typically found on the device label or in documentation).
4. Follow the on-screen setup wizard to select your desired operating mode (Repeater or Client).
5. If selecting Repeater mode, scan for your existing Wi-Fi network, select it, and enter its password.
6. If selecting Client mode, scan for your existing Wi-Fi network, select it, enter its password, and then connect your wired device to the P40's Ethernet port.
7. Save your settings and restart the device if prompted.

6. Operating Modes

Repeater Mode (Range Extender)

In Repeater mode, the Luxul P40 extends the coverage of your existing wireless network. It receives the wireless signal from your main router and re-broadcasts it, effectively expanding the range of your Wi-Fi. This mode is ideal for eliminating Wi-Fi dead zones in your home or office.

Client Mode (Wireless Bridge)

In Client mode, the Luxul P40 acts as a wireless bridge. It connects to your existing Wi-Fi network wirelessly and provides an Ethernet port for connecting a wired device (e.g., a smart TV, gaming console, or desktop computer) that does not have built-in Wi-Fi capabilities. This allows wired devices to access the internet through your wireless network.

7. Maintenance

• Firmware Updates: Periodically check the Luxul website for firmware updates. Keeping your device's firmware up-to-date ensures optimal performance, security, and access to new features.
• Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols.
• Placement: Ensure the device is placed in an area with good airflow to prevent overheating. Avoid placing it near obstructions or other electronic devices that may cause interference.

8. Troubleshooting

No Power (PWR LED Off)

• Ensure the device is securely plugged into a working electrical outlet.
• Test the outlet with another device to confirm it has power.

Cannot Connect to Wi-Fi / No Internet Access

• Verify that your main router is powered on and broadcasting a Wi-Fi signal.
• Ensure the P40 is within range of your main router. Try moving it closer.
• Confirm that you entered the correct Wi-Fi password during setup.
• If in Repeater mode, check the 5G and 2.4G LEDs for activity.
• Try restarting both your main router and the P40.
• Perform a factory reset on the P40 by pressing and holding the LEDs/Reset button for 10-15 seconds, then reconfigure it.

Slow Connection Speed

• Relocate the P40 to a position that offers a stronger signal from your main router, ideally halfway between the router and the desired coverage area.
• Minimize interference from other electronic devices (e.g., microwaves, cordless phones).
• Ensure your main router is operating on optimal channels.
• Check for firmware updates for both your router and the P40.

9. Specifications

10. Warranty and Support

Warranty Information

For detailed warranty information regarding your Luxul P40 device, please refer to the official Luxul website or the warranty card included with your product at the time of purchase. Warranty terms and conditions may vary by region and retailer.

Technical Support

If you encounter any issues that cannot be resolved using this manual, or require further assistance, please visit the official Luxul support website for FAQs, troubleshooting guides, and contact information for technical support.

Luxul Official Website: www.luxul.com