vidaXL Solid Wood Teak Sideboard (Model B089KBKSW9) Instruction Manual

1. Important Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Adult Assembly Required: This product requires adult assembly. Ensure all parts are present and undamaged before beginning.
• Secure Placement: Always place the sideboard on a flat, stable, and level surface to prevent tipping.
• Weight Limits: Do not overload drawers or shelves. Distribute weight evenly.
• Anti-Tip Devices: If an anti-tip device is included, it is strongly recommended to install it to prevent serious injury from tipping furniture.
• Children Safety: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the sideboard.
• Careful Handling: Handle all components with care to avoid scratches or damage.

2. Product Overview

The vidaXL Solid Wood Teak Sideboard is a versatile furniture piece designed for storage and display. It features two drawers and two doors, providing ample space for various items. Constructed from solid teak wood, it offers durability and a natural aesthetic.

Figure 2.1: Front view of the sideboard with overall dimensions (Width: 25.6", Depth: 11.8", Height: 29.5").

Figure 2.2: Main front view of the assembled sideboard.

3. Package Contents

Before beginning assembly, ensure all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Sideboard panels (top, bottom, sides, back)
• Drawer components (fronts, sides, backs, bottoms)
• Door panels
• Shelves
• Hardware pack (screws, dowels, cam locks, hinges, drawer slides, handles/knobs, anti-tip kit)
• Assembly instructions manual

Tools Required (Not Included): Phillips head screwdriver, Hammer, Allen wrench (if not provided in hardware pack).

4. Assembly Instructions

Follow these general steps for assembly. Refer to the specific assembly diagram included in your package for detailed part identification and sequence.

1. Unpack and Identify: Carefully unpack all components and lay them out on a soft, clean surface to prevent scratches. Identify each part using the provided diagram.
2. Assemble Base/Frame: Attach the side panels to the bottom panel using the specified hardware (e.g., dowels and screws). Ensure connections are secure.
3. Install Back Panel: Slide or fasten the back panel into place. This often adds stability to the frame.
4. Assemble Drawers: Construct the drawer boxes by attaching the sides, front, and back panels. Insert the drawer bottom. Attach drawer slides to the drawer boxes and the sideboard frame.
5. Attach Drawer Pulls: Secure the decorative pulls to the drawer fronts.
   

   Figure 4.1: Detail of the door knob/drawer pull attachment point.

6. Install Doors: Attach hinges to the door panels and then to the sideboard frame. Adjust hinges for proper door alignment.
   

   Figure 4.2: Internal view with doors open and drawers extended, showing shelf placement and drawer slides.

7. Insert Shelves: Place shelves onto the shelf pins or supports inside the cabinet sections.
8. Attach Top Panel: Secure the top panel to the assembled frame.
9. Attach Legs: Fasten the legs to the bottom of the sideboard.
   

   Figure 4.3: Detail of the sideboard leg attachment.
10. Install Anti-Tip Kit: If provided, install the anti-tip kit according to its separate instructions to secure the sideboard to a wall.
11. Final Check: Ensure all connections are tight and the sideboard is stable.

5. Operating Your Sideboard

This sideboard is designed for general storage in living rooms, dining rooms, or hallways.

• Drawers: Gently pull the drawer pulls to open and push to close. Avoid forcing drawers.
• Doors: Turn the knobs and pull to open the doors. Push firmly to ensure they close completely.
• Shelves: The internal shelves provide organized storage. Distribute items evenly to maintain balance.
• Placement: Position the sideboard in a location away from direct sunlight, heat sources, and excessive moisture to preserve the wood.

6. Maintenance and Care

Proper care will extend the life and beauty of your solid teak sideboard.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the wood finish.
• Spills: Immediately wipe up any spills to prevent staining or water damage.
• Wood Care: For teak wood, occasional oiling with a suitable wood oil (specifically for teak or hardwoods) can help maintain its luster and protect it from drying out. Follow the instructions on the wood oil product.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or cracking of the wood.
• Humidity Control: Maintain a consistent humidity level in the room to prevent wood from expanding or contracting excessively.
• Regular Checks: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.

7. Troubleshooting

If you encounter any issues with your sideboard, refer to the following common problems and solutions.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or visit the official vidaXL website. If you require assistance with assembly, missing parts, or have any questions regarding your product, please contact vidaXL customer support directly.

You can often find support contact details on the manufacturer's website or on your purchase receipt.

Online Support: Visit vidaXL Customer Service