Lumisky Standy Mini Rock Wireless LED Table Lamp User Manual

1. Introduction

Thank you for choosing the Lumisky Standy Mini Rock wireless LED table lamp. This manual provides essential information for the safe and efficient use of your product. Please read it carefully before use and retain it for future reference.

The Standy Mini Rock is a versatile, portable LED lamp designed for both indoor and outdoor environments. It features a dimmable warm/cold white LED light, a robust polyethylene shade, and a stylish brushed steel base. Its wireless design and long battery life make it an ideal lighting solution for various settings.

Image 1.1: Two Lumisky Standy Mini Rock lamps providing ambient light.

2. Safety Instructions

• Do not expose the lamp to extreme temperatures or direct sunlight for prolonged periods.
• Ensure the USB charging cable is connected to a compatible power source (e.g., 5V USB adapter).
• Do not attempt to disassemble or modify the lamp. This will void the warranty and may cause damage or injury.
• Keep the lamp away from flammable materials.
• Although the lamp is splash-resistant (IP44), do not immerse it in water or expose it to heavy rain.
• Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

• Lumisky Standy Mini Rock LED Table Lamp (quantity as purchased, e.g., 1 or 4 units)
• USB Charging Cable
• User Manual (this document)

4. Setup

4.1 Initial Charging

Before first use, fully charge the lamp. Connect the provided USB charging cable to the charging port located at the base of the lamp and to a suitable USB power adapter (not included).

Image 4.1: USB charging port at the lamp's base.

The charging indicator (if present) will show the charging status. A full charge typically takes 4-6 hours. Once fully charged, the lamp can provide illumination for up to 8 hours, depending on the brightness setting.

5. Operating Instructions

5.1 Power On/Off

Locate the power button, usually integrated into the base or shade of the lamp. Press the button once to turn the lamp on. Press it again to turn the lamp off.

5.2 Adjusting Brightness (Dimmer)

The Standy Mini Rock lamp features a dimmable LED. To adjust the brightness, press and hold the power button or use the dedicated dimmer control (if available) until the desired light intensity is reached. The lamp supports both warm white and cold white light, which can also be adjusted.

Image 5.1: Lumisky Standy Mini Rock lamp illuminated.

5.3 Indoor and Outdoor Use

Thanks to its IP44 splash resistance, the Standy Mini Rock is suitable for both indoor and outdoor use. It can be used on terraces, in gardens, living rooms, or as a bedside lamp.

Image 5.2: Lamp in an outdoor setting.

6. Maintenance

6.1 Cleaning

To clean the lamp, wipe it gently with a soft cloth dampened with lukewarm water and mild soap. Do not use abrasive cleaners or solvents, as these may damage the surface.

6.2 Storage

When not in use for extended periods, store the lamp in a cool, dry place. Ensure the battery is partially charged before storage to maintain battery health.

7. Troubleshooting

• Lamp does not turn on: Ensure the lamp is fully charged. Check the USB cable connection if charging.
• Light is dim or flickers: The battery may be low. Recharge the lamp.
• Lamp does not charge: Verify the USB cable is properly connected to both the lamp and the power adapter. Try a different USB port or adapter.
• Brightness adjustment not working: Ensure the lamp is powered on. If the issue persists, contact customer support.

8. Specifications

Image 8.1: Energy Label for Standy Mini Rock.

9. Warranty and Support

Lumisky products are designed and manufactured to the highest quality standards. For information regarding warranty coverage or technical support, please refer to the warranty card included with your purchase or visit the official Lumisky website. Please have your proof of purchase and product model number ready when contacting support.