elxjar BC-144N Desktop Charger User Manual

Introduction

This manual provides essential instructions for the safe and efficient use of your elxjar BC-144N Desktop Charger. This charger is designed to provide reliable power for compatible ICOM radios and battery packs. Please read this manual thoroughly before use to ensure proper operation and to prevent damage.

Package Contents

• 2 x BC-144N Charger Base
• 2 x BC-122E Power Adapter
• Note: Battery not included.

Compatibility

Compatible Radios:

• ICOM IC-V8, IC-V82, IC-U82
• ICOM IC-A6, IC-A24
• ICOM IC-T3H
• ICOM IC-F3GT, IC-F3GS, IC-F4GT, IC-F4GS, IC-F11, IC-F11S, IC-F12, IC-F12S, IC-F21, IC-F21S, IC-F22, IC-F22S, IC-F30FS, IC-F30GT, IC-F31GS, IC-F31GT, IC-F40GS, IC-F40GT, IC-F41GS, IC-F41GT, IC-F21BR, IC-F21GM

Compatible Batteries:

• BP-209, BP-209N
• BP-210N
• BP-222N

Setup

1. Unpack Components: Carefully remove the charger base and power adapter from the packaging.
2. Connect Power Adapter: Insert the DC plug of the BC-122E power adapter into the DC input jack located on the rear of the BC-144N charger base. Ensure a firm connection.
3. Connect to Power Outlet: Plug the BC-122E power adapter into a standard 240V AC wall outlet. The charger is designed for 240 Volts input.

Figure 1: Charger base and power adapter components.

Figure 2: DC input jack on the rear of the charger base.

Operating Instructions

1. Insert Battery/Radio: Carefully place the compatible battery pack or the radio with the battery attached into the charging slot of the BC-144N desktop charger. Ensure it is seated correctly and makes proper contact with the charging terminals.
2. Monitor Charging Status: Observe the LED indicator on the front of the charger base.
   • Orange LED: Indicates that the battery is currently charging.
   • Green LED: Indicates that the battery is fully charged.
3. Remove When Charged: Once the LED turns green, the battery is fully charged. You may remove the battery or radio from the charger.

Figure 3: Front view of the charger with LED indicator.

Maintenance

• Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Avoid dropping the charger or subjecting it to strong impacts. Do not attempt to disassemble the charger; this will void any potential warranty and may cause damage.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the seller or manufacturer's contact information provided at the point of purchase. Keep your purchase receipt as proof of purchase.

For further assistance, you may also visit the product page on Amazon.com.au: Product Link