Daytech Caregiver Pager Call Button System E-01W User Manual

1. Introduction

The Daytech Caregiver Pager Call Button System is a wireless alert solution designed to provide assistance and peace of mind for caregivers and individuals requiring support. This system enables quick communication when help is needed, enhancing safety and independence within various environments such as homes, hospitals, and nursing facilities.

This manual provides detailed instructions for setting up, operating, and maintaining your Daytech Caregiver Pager Call Button System.

2. Product Components

The Daytech Caregiver Pager Call Button System typically includes the following components:

• Receiver Units: These units plug into a standard electrical outlet and emit an audible and visual alert when a call button is pressed.
• Call Buttons: These can be worn as a pendant with a lanyard or mounted on a wall. They are splash-proof.
• Watch Pager: A wearable watch-style button for easy access. Note: The watch pager cannot be immersed in water.
• Lanyards: For wearing call buttons as pendants.
• Double-sided Adhesive: For wall-mounting call buttons.
• Batteries: 12V batteries are included for the call buttons and watch pager.

Image: Overview of the Daytech Caregiver Pager System components.

3. Setup Instructions

Follow these steps to set up your Daytech Caregiver Pager System:

3.1. Powering the Receiver

1. Plug the receiver unit into a standard electrical wall socket. The receiver will power on.

3.2. Battery Installation (Call Buttons/Watch Pager)

The call buttons and watch pager come with pre-installed 12V batteries. If replacement is needed, refer to the Maintenance section.

3.3. Pairing Call Buttons with Receiver

To ensure the call buttons communicate with the receiver, they must be paired:

1. Plug the receiver into a socket.
2. On the receiver, use the Forward (▲) or Backward (▼) buttons to select your desired ringtone.
3. Press and hold the Volume Control button on the receiver until it makes a "ding-dong" sound. This indicates the receiver is in pairing mode.
4. Immediately press the call button (either the pendant button or the watch pager SOS button). The receiver will make another "ding-dong" sound, confirming successful pairing.

Image: Step-by-step guide for pairing call buttons with the receiver.

4. Operating Instructions

4.1. Initiating a Call

When assistance is needed, simply press the large button on the call button unit or the SOS button on the watch pager. This will send a wireless signal to the paired receiver(s).

Image: Demonstrates how pressing a call button alerts the receiver.

4.2. Receiving an Alert

Upon receiving a signal, the receiver unit will:

• Emit an audible alert (ringtone).
• Illuminate its LED light, providing a visual alert.

4.3. Adjusting Ringtone and Volume

The receiver offers customization options for alerts:

• Ringtone Selection: Use the Forward (▲) and Backward (▼) buttons on the side of the receiver to cycle through 20 unique ringtones.
• Volume Adjustment: Press the Volume Control button to select from 5 adjustable volume levels, ranging from 0dB (mute) to 110dB.

Image: Receiver features including ringtone and volume options.

4.4. Night Light Mode

To activate or deactivate the night light feature on the receiver, press and hold the middle button (bell icon) for 5 seconds.

5. Placement and Usage

The Daytech Caregiver Pager System offers flexible placement options:

• Wearable Call Buttons: The call buttons can be worn around the neck using the provided lanyard. The watch pager is worn on the wrist.
• Wall Mounting: Call buttons can be affixed to a wall using the included double-sided adhesive. This is particularly useful in areas like bathrooms, as the call button unit is splash-proof (IP55 rated).

Image: Various attachment options for the call buttons.

5.1. Operating Range

The wireless system has an operating range of up to 300 feet (90 meters) in open areas, allowing caregivers to move freely around the house while remaining alert.

Image: Illustration of the system's wireless operating range within a home.

6. Maintenance

6.1. Battery Replacement

The call buttons and watch pager are powered by 12V batteries. If the signal becomes intermittent or the device stops responding, it may be time to replace the battery. Refer to the device's casing for instructions on how to open and replace the battery.

6.2. Cleaning

Wipe the receiver and call buttons with a soft, dry cloth. Avoid using abrasive cleaners or submerging any part of the system in water.

6.3. Water Resistance

The call button unit is IP55 splash-proof, meaning it can withstand splashes of water, making it suitable for bathroom installation. However, the watch pager and call button units are not designed to be immersed in water and should be removed before bathing or showering.

Image: Demonstrates water resistance of the call button and proper usage.

7. Troubleshooting

If you encounter issues with your Daytech Caregiver Pager System, consider the following:

• No Alert from Receiver:
  • Ensure the receiver is properly plugged into a working electrical outlet.
  • Check if the call button or watch pager battery needs replacement.
  • Verify that the call button/watch pager is paired with the receiver (refer to Section 3.3).
  • Ensure the call button/watch pager is within the operating range of the receiver.
• Intermittent Alerts:
  • This often indicates a low battery in the call button or watch pager. Replace the battery.
  • Check for potential signal interference from other wireless devices or thick walls/obstructions.
• Receiver Not Responding to Button Presses:
  • Re-pair the call button/watch pager with the receiver (refer to Section 3.3).

8. Specifications

9. Warranty and Support

Daytech provides a full year's warranty and a money-back guarantee for this product. For any questions, troubleshooting assistance, or support, please contact Daytech customer service. Round-the-clock customer service is available to assist you.