Flexson S5-FS Floor Stand for Sonos Five User Manual

1. Introduction

Thank you for choosing the Flexson S5-FS Floor Stand. This stand is specifically designed to securely hold your Sonos Five or Play:5 speaker, allowing for optimal sound placement and flexible orientation. It features clever cable management to maintain a tidy appearance and is available in colors to match your Sonos speaker.

This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the best experience from your Flexson floor stand.

2. Safety Information

• Read all instructions before assembly and installation.
• Ensure all components are present and undamaged before proceeding.
• Do not exceed the maximum weight capacity of the stand. This stand is designed for Sonos Five/Play:5 speakers only.
• Place the stand on a stable, level surface to prevent tipping.
• Keep small parts away from children to avoid choking hazards.
• Route cables carefully to prevent tripping hazards and damage to the speaker or stand.

3. Package Contents

Please verify that all the following components are included in your package:

• Base Plate
• Main Support Pole
• Speaker Mounting Plate/Bracket
• Fixing Screws and Washers (various sizes for assembly and speaker attachment)
• Assembly Tool (e.g., Allen key)
• Instruction Leaflet (this manual)

Image: All components of the Flexson S5-FS Floor Stand laid out, including the base, pole, and speaker mount.

4. Setup Instructions

Follow these steps to assemble your Flexson S5-FS Floor Stand:

1. Attach the Main Support Pole to the Base Plate: Align the bottom of the main support pole with the designated holes on the base plate. Secure it using the provided screws and washers. Tighten firmly with the assembly tool.
2. Attach the Speaker Mounting Plate: Connect the speaker mounting plate to the top of the main support pole. Ensure it is oriented correctly for your desired speaker position (horizontal or vertical). Secure with the appropriate screws.
3. Route Speaker Cable (Optional): If your speaker requires a power cable or other audio cables, carefully feed them through the cable management channel within the main support pole. Start from the bottom opening near the base and guide it up to the top.
4. Mount the Sonos Five/Play:5 Speaker: Carefully place your Sonos Five or Play:5 speaker onto the mounting plate. Align the speaker with the stand's securing points. Use the provided speaker-specific screws to firmly attach the speaker to the stand. Ensure the speaker is stable and secure before releasing it.

Image: The Flexson S5-FS Floor Stand fully assembled, ready for a Sonos Five speaker to be mounted.

5. Operating Instructions

The Flexson S5-FS Floor Stand is designed for simple and effective use:

• Speaker Orientation: The stand allows for both horizontal and vertical placement of your Sonos Five/Play:5 speaker. Choose the orientation that best suits your audio setup and room acoustics.

Image: A Sonos Five speaker mounted horizontally on the Flexson S5-FS Floor Stand.

Image: A Sonos Five speaker mounted vertically on the Flexson S5-FS Floor Stand.

• Cable Management: Utilize the integrated cable management system to conceal power and audio cables within the stand's pole. This helps maintain a clean and organized appearance.
• Placement: Position the stand in your desired listening area, ensuring it is on a flat, stable surface. Consider the acoustics of your room for optimal sound dispersion.

6. Maintenance

To keep your Flexson S5-FS Floor Stand in optimal condition:

• Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Inspection: Periodically check all screws and connections to ensure they remain tight and secure.
• Avoid Moisture: Do not expose the stand to excessive moisture or liquids.

7. Troubleshooting

If you encounter any issues with your Flexson S5-FS Floor Stand, refer to the following common problems and solutions:

8. Specifications

• Model: FLXS5FS1011
• Compatibility: Sonos Five, Sonos Play:5
• Material: Alloy Steel, Aluminum
• Color: White (as per product details, other colors may be available)
• Product Dimensions (L x W x H): 15.56" x 10.62" x 26.4" (39.5cm x 27cm x 67cm)
• Maximum Height: 26.4 inches (67cm)
• Finish Type: Matte
• Features: Cable management, horizontal or vertical speaker orientation

9. Warranty Information

Flexson products are manufactured to high standards and are covered by a limited warranty against manufacturing defects. Please refer to the official Flexson website or your purchase documentation for specific warranty terms and conditions, including duration and claim procedures. Keep your proof of purchase for warranty claims.

10. Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official Flexson website or contact their customer service department. You can typically find contact information on the Flexson website or on your product packaging.

Website: www.flexson.com (Please note: This is a placeholder URL. Refer to your product packaging for the correct official website.)