Introduction
This manual provides essential information for the safe and effective use of your SupplySource 6ft/1.8m UL Listed AC Power Cord. This cable is designed for compatibility with devices requiring a standard 3-pin power connector, such as the Mackie ProFX8v2 8-Channel Effects Mixer.
Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury, please read and follow all safety instructions.
- Ensure the power cable is compatible with your device's power input requirements before connecting.
- This product is UL Listed, indicating it meets recognized safety standards.
- Avoid prolonged use in poorly ventilated or humid environments.
- Do not place the cable on skin products or in direct contact with skin for extended periods, especially if it becomes warm during operation.
- The cable is designed with multiple smart features safeguarding against incorrect voltage (IV), short circuit (SC), and internal overheating (IO).
- Do not modify or attempt to repair the power cord. Refer servicing to qualified personnel.
Setup
Follow these steps to properly connect your AC power cord:
- Verify Compatibility: Before connecting, ensure your device, such as the Mackie ProFX8v2 mixer, requires a standard 3-pin (IEC C13 type) AC power cord. Refer to your device's manual for power input specifications.
- Inspect the Cable: Visually inspect the power cord for any signs of damage, such as cuts, frayed wires, or bent pins. Do not use a damaged cable.
- Connect to Device: Insert the 3-pin female end of the power cord firmly into the corresponding power inlet on your device.
- Connect to Power Outlet: Insert the 3-prong male plug into a standard, grounded AC wall outlet.
- Secure Connection: Ensure both ends of the cable are securely seated to prevent accidental disconnection.
Figure 1: Correct power connector type for this cable. The middle image with the green checkmark indicates the compatible 3-pin IEC C13 connector.
Figure 2: The SupplySource 6ft/1.8m UL Listed AC Power Cord.
Operating
Once the power cord is securely connected to both your device and a grounded AC outlet, the device should receive power. Follow your device's specific instructions for powering on and operation.
- Ensure the power cord is not kinked, pinched, or placed under heavy objects during operation.
- Avoid running the cable through high-traffic areas where it could be tripped over or damaged.
Maintenance
Proper maintenance ensures the longevity and safe operation of your power cord:
- Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cable with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use, coil the cable loosely. Avoid tight coiling or bending at sharp angles, which can damage internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the cable for any signs of wear, damage, or discoloration. Replace the cable immediately if any damage is observed.
Troubleshooting
If your device is not receiving power, consider the following troubleshooting steps:
- Check Connections: Ensure both ends of the power cord are fully and securely plugged into the device and the wall outlet.
- Verify Outlet Functionality: Test the wall outlet with another known working appliance to confirm it is supplying power.
- Inspect Cable: Look for any visible damage to the power cord. If damaged, discontinue use and replace it.
- Device Power Switch: Confirm that your device's power switch is in the "On" position.
- Device Compatibility: Double-check that this specific power cord is indeed the correct type for your device.
If the issue persists after these steps, consult your device's manual or contact customer support.
Specifications
| Cable Type | AC Power Cord (3-pin, IEC C13 type) |
| Length | 6 feet (1.8 meters) |
| Wire Gauge | 18 AWG (0.824 mm²) |
| Certification | UL Listed, RoHS Certified |
| Connectors | 3-pin power connector (female C13) to 3-prong grounded plug (male NEMA 5-15P) |
| Compatibility | Devices requiring a standard 3-pin AC power cord, such as Mackie ProFX8v2 8-Channel Effects Mixer, PCs, monitors, printers, scanners, LCD/Plasma TVs. |
Warranty and Support
SupplySource products are manufactured with high-quality materials. For any questions or concerns regarding your power cord, please contact SupplySource customer support.
How to Contact Support:
You can contact us directly from your Amazon account. Locate your order and click the "Problem with this order?" button. Then select the "Contact Seller" button to send an e-mail message. We aim to resolve any issues within 24 hours.