Platinet PACW5 Alarm Clock with Wireless Charger User Manual

Introduction

Thank you for purchasing the Platinet PACW5 Alarm Clock with Wireless Charger. This device combines a digital alarm clock with a convenient 5W wireless charging pad and an additional USB charging port. Please read this manual carefully to ensure proper use and maintenance of your device.

Package Contents

Upon opening the package, please verify that all components are present and in good condition:

• Platinet PACW5 Alarm Clock with Wireless Charger
• Power Adapter (typically included)
• User Manual (this document)

Image: The Platinet PACW5 Alarm Clock and Wireless Charger displayed within its retail packaging, highlighting its features and a smartphone being charged wirelessly on the device.

Product Overview

Familiarize yourself with the main components of your Platinet PACW5 device.

Image: A front-angle view of the Platinet PACW5 Alarm Clock, featuring its large digital time display and the integrated wireless charging pad. Control buttons are visible on the pad.

Key Features:

• Digital Time Display (12/24 hour format)
• Adjustable Display Brightness
• Dual Alarm Functionality
• 5W Wireless Charging Pad (up to 10W max input)
• USB-A Output Port for Wired Charging (5V 1A max)
• Time Memory Function (retains settings after power disconnection)
• Rubber Pad for Device Protection during Wireless Charging

Setup

1. Power Connection: Connect the provided power adapter to the DC input port on the back of the alarm clock. Plug the adapter into a standard wall outlet. The display should illuminate.
2. Initial Time Setting: Upon first power-up, the time may need to be set. Refer to the "Operating Instructions" section for detailed steps on setting the time.
3. Placement: Place the alarm clock on a stable, flat surface, such as a bedside table or desk. Ensure adequate ventilation around the device.

Operating Instructions

Setting the Time:

Specific buttons for time setting are usually labeled or indicated by symbols. Look for buttons like "SET", "TIME", or "M" (Mode) combined with "+" and "-" buttons.

1. Press and hold the "SET" or "TIME" button until the hour digits begin to flash.
2. Use the "+" and "-" buttons to adjust the hour.
3. Press the "SET" or "TIME" button again to move to the minute digits.
4. Use the "+" and "-" buttons to adjust the minutes.
5. Press "SET" or "TIME" one more time to confirm and exit time setting mode.

Setting Alarms (Alarm 1 and Alarm 2):

The device supports two independent alarms.

1. Press and hold the "ALARM 1" button (or similar, e.g., "A1") until the alarm hour digits flash.
2. Adjust the hour using the "+" and "-" buttons.
3. Press "ALARM 1" again to set the minutes.
4. Adjust the minutes using the "+" and "-" buttons.
5. Press "ALARM 1" to confirm. You may then be prompted to enable/disable the alarm or select a snooze duration.
6. Repeat the process for "ALARM 2" using its dedicated button (e.g., "A2").

Adjusting Display Brightness:

The display brightness can be adjusted to suit your preference.

• Look for a dedicated "DIMMER" or "BRIGHTNESS" button, or a function accessible via the "MODE" button.
• Press the button repeatedly to cycle through available brightness levels (e.g., High, Medium, Low, Off).

Wireless Charging:

The device features a 5W wireless charging pad, compatible with Qi-enabled smartphones.

Image: A smartphone positioned on the wireless charging surface of the Platinet PACW5 Alarm Clock. The phone's screen displays a charging indicator, confirming active wireless power transfer.

1. Ensure the alarm clock is powered on.
2. Place your Qi-compatible smartphone directly onto the rubberized charging pad.
3. An LED indicator on the device (usually green) will illuminate to confirm that charging has begun.
4. The rubber pad protects your smartphone from scratches during charging.
5. Remove your phone once fully charged or when no longer needed.

Note: Wireless charging efficiency is approximately 73%. Ensure your phone is centered on the pad for optimal charging.

Wired USB Charging:

An additional USB-A port is available for charging devices via a cable.

• Locate the USB-A output port on the side or back of the alarm clock.
• Connect your device's USB charging cable to this port.
• The output is 5V 1A (max).

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the alarm clock. Do not use abrasive cleaners or solvents.
• Storage: If storing the device for an extended period, disconnect it from the power source and store it in a cool, dry place.
• Power: Always use the original power adapter provided with the device.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Platinet website. Keep your proof of purchase for warranty claims.

Manufacturer: Platinet S.A.