BOWERY HILL King Platform Bed with Storage

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your BOWERY HILL King Platform Bed with Storage. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The BOWERY HILL King Platform Bed features a sturdy construction of rubber wood and MDF with an oak finish, a shelf headboard, and low-profile storage footboard with drawers. It is designed to accommodate a King-size mattress.

Image 1.1: Fully assembled BOWERY HILL King Platform Bed with Storage. This image shows the complete bed frame with its headboard, footboard, and integrated storage drawers, providing a visual overview of the product.

2. Safety Information

• Always assemble the bed on a soft, clean surface to prevent scratches.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
• Do not allow children to climb on the bed frame during assembly or use.
• Use only the recommended mattress size (King) to ensure proper fit and safety.
• Keep small parts and packaging materials away from children.
• Two adults are recommended for assembly to prevent injury and ensure proper handling of large components.

3. Package Contents

Before assembly, verify that all components and hardware are present. Refer to the packing list included with your product for a complete and accurate inventory. Typical components include:

• Headboard Panel with Shelf
• Footboard with Storage Drawers
• Side Rails (Left and Right)
• Support Slats (13 pieces)
• Center Support Beam and Legs
• Assembly Hardware (bolts, washers, nuts, screws, Allen wrench)

If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.

4. Setup and Assembly

Assembly is required for this product. Follow these general steps. For detailed, step-by-step instructions, refer to the separate assembly guide provided in your product packaging.

1. Prepare the Area: Clear a spacious area for assembly. Lay out all components and hardware.
2. Attach Side Rails to Headboard: Securely fasten the side rails to the headboard using the provided bolts and an Allen wrench. Ensure connections are tight.
3. Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard. Ensure the storage drawers are correctly oriented within the footboard.
4. Install Center Support: Place the center support beam and attach its legs, ensuring they are evenly distributed for optimal mattress support.
5. Place Slats: Lay the 13 support slats across the side rails, distributing them evenly. Secure them in place if your model includes pre-drilled holes or fasteners.

Image 4.1: View of the BOWERY HILL King Platform Bed frame with its 13 support slats installed. This image illustrates the internal structure that supports the mattress.

Image 4.2: Diagram showing the overall dimensions of the BOWERY HILL King Platform Bed: 85 inches long, 79 inches wide, and 55 inches high. This provides critical measurements for space planning.

5. Operating Features

5.1 Storage Drawers

The low-profile footboard integrates two storage drawers. To use, gently pull the antique brass metal hardware handles to open the drawers. Push them back in until they are flush with the footboard for a neat appearance.

Image 5.1: The BOWERY HILL King Platform Bed with its two storage drawers partially open, demonstrating the integrated storage functionality at the foot of the bed.

5.2 Shelf Headboard

The headboard features an integrated shelf. This shelf can be used for decorative items, books, or small personal belongings, providing convenient bedside access.

6. Care and Maintenance

To maintain the appearance and longevity of your BOWERY HILL King Platform Bed, follow these care instructions:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the oak finish.
• Spills: Blot spills immediately with a clean, dry cloth.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the wood finish.
• Humidity: Maintain a consistent humidity level in the room to prevent wood from warping or cracking.
• Hardware: Periodically check all bolts and screws and tighten them as needed to ensure the bed remains stable and secure.

7. Troubleshooting

8. Product Specifications

• Model: BH-4752-1568661
• Brand: BOWERY HILL
• Size: King
• Product Dimensions: 85"L x 79"W x 55"H
• Color: Oak
• Finish Type: Wood
• Material: Rubber wood, Chipboard, MDF
• Included Components: Headboard, Footboard with Storage, Side Rails, Slats
• Number of Slats: 13
• Hardware: Antique Brass Metal
• Assembly Required: Yes
• Item Weight: Approximately 141 pounds
• UPC: 680499214937

9. Warranty and Support

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official BOWERY HILL website. For technical assistance, missing parts, or any other inquiries, please contact BOWERY HILL customer support through their official channels.