Introduction
Thank you for choosing the FITUEYES FT-S3601MB TV Stand. This manual provides comprehensive instructions for the safe and efficient assembly, operation, and maintenance of your new TV stand. Please read this manual carefully before beginning assembly and retain it for future reference.
Safety Information
Important Safety Notice: Adjusting the height of the TV stand must be done with caution. Improper height adjustment may lead to instability and potential tipping. Always ensure the stand is stable after any adjustments.
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or defective.
- Follow the assembly instructions precisely. Incorrect assembly can result in product failure or injury.
- Do not exceed the maximum load capacity of 40kg.
- This stand is designed for televisions between 32 and 75 inches. Ensure your TV's VESA pattern is compatible (10x10cm to 60x40cm).
- Keep children and pets away from the assembly area.
- Periodically check all connections and fasteners to ensure they remain secure.
Package Contents
All necessary parts for the assembly of your FITUEYES FT-S3601MB TV Stand are included in the package. Please verify that all components are present before proceeding with assembly. Refer to the included parts list for a detailed overview.
Specifications
| Feature | Specification |
|---|---|
| Brand | FITUEYES |
| Model Number | FT-S3601MB-J |
| Material | Iron (Cold-rolled steel) |
| Color | Black |
| Compatible TV Sizes | 32-75 inches |
| Maximum Load Capacity | 40 kg |
| VESA Compatibility | Min 10x10cm, Max 60x40cm |
| Height Adjustment | 7 stages (approx. 1130mm to 1430mm) |
| Swivel Angle | ±30 degrees |
| Tilt Angle | Front 15 degrees / Back 5 degrees |
| Shelves | Two middle shelves, stepless height adjustment |
Setup and Assembly
Assembly requires careful attention to detail. It is recommended that two people assemble this product due to its weight and size. Please refer to the included assembly diagram for specific steps.
- Unpack Components: Carefully remove all parts from the packaging. Verify against the parts list to ensure everything is present.
- Assemble Base: Attach the main support column to the base plate using the provided screws and tools. Ensure all connections are tight and secure.
- Install TV Brackets: Attach the VESA mounting brackets to the back of your television. Select the appropriate screws and spacers for your TV model. Ensure the brackets are centered and securely fastened.
- Mount TV to Stand: With assistance, carefully lift the television and hook the TV brackets onto the main support column's mounting plate. Secure the TV using the safety locking mechanisms.
- Adjust Height: The TV mounting plate can be adjusted to 7 different height levels along the main column. Select the desired height and secure it firmly.
- Install Shelves: Attach the two middle shelves to the main column. These shelves feature stepless height adjustment, allowing you to position them as needed for your media devices.
Figure 1: Illustration of attaching the base to the main column.
Figure 2: Illustration of attaching the TV mounting plate to the main column.
Figure 3: Illustration of installing the middle shelves.
Figure 4: Illustration of the completed assembly with a TV and cable management.
Operating Instructions
The FITUEYES FT-S3601MB TV Stand offers various adjustment options for an optimal viewing experience.
- Height Adjustment: To adjust the TV height, loosen the securing bolts on the main column, carefully raise or lower the TV to one of the 7 preset positions, and then re-tighten the bolts securely. Always ensure the TV is level and stable after adjustment.
- Swivel Adjustment: The TV can be swiveled left or right by up to 30 degrees. Gently rotate the TV to your desired viewing angle. The stand is designed to hold the position once set.
- Tilt Adjustment: The TV mounting bracket allows for a forward tilt of 15 degrees and a backward tilt of 5 degrees. Adjust the tilt by loosening the tilt mechanism, setting the desired angle, and then tightening it to secure the TV in place.
- Shelf Height Adjustment: The middle shelves can be adjusted steplessly. Loosen the shelf securing mechanism, slide the shelf to the desired height, and then tighten to secure.
Figure 5: Visual guide for swivel (±30°) and tilt (front 15°, back 5°) adjustments.
Maintenance
Regular maintenance ensures the longevity and safe operation of your TV stand.
- Cleaning: Wipe the stand with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Fastener Check: Periodically (e.g., every 3-6 months) inspect all screws, bolts, and connections to ensure they are tight. Re-tighten if necessary.
- Stability Check: Ensure the stand remains stable and level on its surface. If it wobbles, check the base and connections.
Troubleshooting
If you encounter any issues with your FITUEYES FT-S3601MB TV Stand, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV stand is wobbly/unstable. | Loose fasteners; uneven floor; TV weight exceeds capacity. | Check and tighten all screws and bolts. Move the stand to a level surface. Ensure TV weight is within 40kg limit. |
| Difficulty adjusting TV height. | Securing bolts are too tight; mechanism is stiff. | Loosen securing bolts sufficiently before attempting to adjust. Apply a small amount of silicone lubricant if mechanism is stiff. |
| TV is not level after mounting. | TV brackets not aligned; stand not level. | Re-check TV bracket installation on the TV back. Ensure the stand is on a level surface. |
Warranty and Support
FITUEYES prioritizes customer experience and product quality. If you encounter any issues with this product during use, please do not hesitate to contact us. We aim to respond within 24 hours and offer solutions such as free exchanges or full refunds.
For support, please visit our official website or contact our customer service team through the platform where you purchased the product.
