AutoFull Gaming Chair Instruction Manual

1. Product Overview

The AutoFull Gaming Chair is designed to provide optimal comfort and support for extended gaming or work sessions. It features an ergonomic design, high-density foam padding, and multiple adjustment options to suit various user preferences.

Figure 1: AutoFull Gaming Chair. This image displays the overall design of the black AutoFull gaming chair with its racing-style aesthetic and included headrest and lumbar support cushions.

Key Features:

• Ergonomic Design: Provides long-lasting support for back and neck.
• High-Density Foam Padding: 5.1-inch integrated high-density foam for comfort and durability.
• 2D Adjustable Armrests: Lift and rotate to adapt to different postures and table heights.
• 155° Reclining & 25° Rocking Function: Allows for comfortable relaxation.
• Durable Construction: SGS4-level cylinders and high-strength nylon base for safety and stability.
• Wear-resistant PU Leather: High-quality, super soft PU leather on cushions, headrests, and lumbar pillow.

2. Package Contents

Before assembly, ensure all components listed below are present and undamaged. Refer to the included "Installation Manual (PDF)" for detailed part identification.

• Seat Cushion (x1)
• Backrest (x1)
• Armrests (x2)
• Chair Base (x1)
• Gas Lift Cylinder (x1)
• Tilt Mechanism (x1)
• Casters (x5)
• Lumbar Pillow (x1)
• Headrest Pillow (x1)
• Assembly Tools & Hardware (screws, Allen wrench)
• User Manual (this document)

3. Setup and Assembly

Assembly is straightforward and typically takes 10-15 minutes. Follow these steps for a quick setup. For detailed visual instructions, refer to the official installation video.

Assembly Steps:

1. Attach Casters to Base: Insert the five casters firmly into the holes on the chair base.
2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the chair base.
3. Attach Tilt Mechanism: Secure the tilt mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism aligns with the front of the seat.
4. Connect Backrest to Seat: Align the backrest with the seat and secure it using the screws on the side. Cover the screw holes with the plastic covers.
5. Attach Armrests: Secure the armrests to the sides of the seat using the designated screws.
6. Assemble Seat onto Base: Carefully place the assembled seat onto the gas lift cylinder.
7. Attach Cushions: Secure the lumbar pillow and headrest pillow using their integrated straps. The lumbar pillow straps typically go through the lower cutouts, and the headrest pillow straps go over the top of the backrest or through the upper cutouts.

Figure 2: Ergonomic Design. This image highlights the ergonomic shape of the chair's backrest and seat, designed for comfort and support.

4. Operating Instructions

Height Adjustment:

To adjust the chair's height, pull the lever located on the right side of the seat upwards while applying or releasing weight from the seat. Release the lever to lock the height.

Reclining Function:

To recline the backrest, pull the lever on the left side of the seat upwards and lean back to your desired angle. Release the lever to lock the backrest in place. The chair supports up to 155 degrees of recline.

Rocking Function:

To enable the rocking function, pull the height adjustment lever outwards. Push it inwards to lock the rocking function. The chair allows for up to 25 degrees of rocking motion.

Armrest Adjustment:

The 2D armrests can be adjusted in two ways:

• Height Adjustment: Press the button on the side of each armrest and move it up or down to your preferred height.
• Rotation: The armrest pads can be rotated left or right to provide optimal support for your arms and wrists.

Figure 3: Recline and Rocking Features. This image illustrates the chair's ability to recline up to 155 degrees and rock up to 25 degrees, providing versatile comfort options.

5. Maintenance

Proper maintenance will extend the life and appearance of your AutoFull Gaming Chair.

Cleaning:

• PU Leather: Wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Base and Casters: Clean with a damp cloth. Periodically remove any hair or debris from the casters to ensure smooth rolling.

General Care:

• Avoid prolonged exposure to direct sunlight or extreme temperatures, which can damage the PU leather.
• Do not use sharp objects on the chair's surface.
• Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
• Ensure the chair is used on a flat, stable surface.

6. Troubleshooting

7. Specifications

• Brand: AutoFull
• Model Name: AF070
• Color: Black
• Product Dimensions: 27.6"D x 23.6"W x 50.8"H
• Maximum Weight Recommendation: 350 Pounds
• Material: High-quality Wear-resistant Super Soft PU leather, High-density foam, Nylon base
• Back Style: Solid Back
• Special Features: Ergonomic, Rolling, Cushion Availability, 2D Armrests, 155° Tilt, 25° Rocking
• Recommended Uses: Gaming
• Item Weight: 44 pounds

8. Warranty and Support

AutoFull provides a 3-year after-sales service for all AutoFull chairs. This includes free parts replacement if you encounter any after-sales problems during the period. Our professional after-sales team aims to provide solutions within 24 hours.

For further assistance or to claim warranty service, please contact AutoFull customer support through the retailer where you purchased the product or visit the official AutoFull website.

You can also refer to the official PDF documents for additional information:

• Certificate of Compliance (PDF)
• Installation Manual (PDF)