1. Important Safety Information
CAUTION: This product contains small parts and may have sharp edges. Children must use this product under adult supervision. Not suitable for children under 8 years of age due to small parts which could pose a choking hazard.
Always handle wooden pieces carefully to avoid splinters. Keep all packaging materials away from children.
2. Product Overview
The ROBOTIME 3D Wooden Sailboat Model Kit (RBT-TG305) is an educational hobby toy designed for assembly. This kit allows you to construct a detailed sailboat model from 118 precisely cut wooden pieces. The finished model measures approximately 7.87 x 1.81 x 4.7 inches.
Image 2.1: The fully assembled ROBOTIME 3D Wooden Sailboat Model Kit (RBT-TG305).
The kit includes all necessary wooden components and a straightforward English manual with illustrations to guide the assembly process. No additional glue is required for construction.
3. Assembly Instructions
Follow these steps to assemble your ROBOTIME 3D Wooden Sailboat Model Kit. The estimated assembly time is approximately 1 hour.
- Unpack and Inspect: Carefully open the package and remove all wooden sheets. Verify that all 118 pieces are present and undamaged. Refer to the included manual for a complete list of parts.
Image 3.1: Components of the ROBOTIME 3D Wooden Sailboat Model Kit laid out for inspection.
- Detach Pieces: Gently detach each wooden piece from its sheet. Use a small tool or your fingers to carefully push them out. Avoid forcing pieces to prevent breakage.
Image 3.2: Demonstrating how to detach wooden pieces from the sheet.
- Follow Illustrated Manual: Refer to the provided English instruction manual. It contains step-by-step illustrations guiding you through the assembly sequence. Each piece is typically numbered or identified for easy matching.
Image 3.3: A close-up view of the assembly process, showing how pieces interlock.
- Interlock Pieces: Fit the corresponding pieces together. The design uses an interlocking mechanism, eliminating the need for glue. Ensure pieces are aligned correctly before applying gentle pressure.
Image 3.4: A detailed section of the sailboat model during assembly, highlighting the mast structure.
- Complete the Model: Continue following the instructions until all pieces are assembled and the sailboat model is complete.
Image 3.5: A side view of the sailboat model, illustrating the intricate hull design during construction.
4. Maintenance and Care
- Cleaning: Dust the model regularly with a soft, dry cloth. Avoid using water or cleaning solutions, as they may damage the wood.
- Storage: Store the assembled model in a dry environment, away from direct sunlight and extreme temperature changes, to prevent warping or fading of the wood.
- Handling: Handle the model with care to avoid accidental breakage of delicate parts.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pieces do not fit together easily. | Misalignment or slight variations in wood thickness. | Ensure correct orientation. Apply gentle, even pressure. Do not force pieces. If a piece is slightly tight, a very fine sandpaper (not included) can be used sparingly on the interlocking tabs, but this should be done with extreme caution to avoid over-sanding. |
| A wooden piece breaks during detachment or assembly. | Excessive force or delicate nature of some parts. | If a piece breaks, wood glue (not included) can be used for repair. For significant breakage or missing parts, refer to the "Warranty and Support" section for part replacement service. |
| Finished model appears flimsy or unstable. | Pieces not fully interlocked or incorrect assembly step. | Review the assembly steps in the manual to ensure all connections are secure and correctly placed. Gently press on all joints to ensure they are fully seated. |
6. Specifications
- Product Dimensions: 7.87 x 1.81 x 4.7 inches
- Item Weight: 5.3 ounces
- Number of Pieces: 118
- Model Number: RBT-TG305
- Recommended Age: 8 years and up
- Material: Wood
7. Warranty and Support
ROBOTIME offers a part replacement service. If any parts are broken or lost during the assembly process, please contact ROBOTIME customer support for assistance.
Image 7.1: Information on ROBOTIME's part replacement service.
For further inquiries or support, please visit the official ROBOTIME store or contact their customer service channels.
