1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the EASYGUARD EC010 PKE Car Alarm System. This system is designed to enhance vehicle security and convenience with features such as passive keyless entry, remote engine start, and push button start/stop functionality.
Important Note: Professional installation is required for this product. Improper installation may lead to vehicle damage or system malfunction. Please ensure you can arrange for professional installation before purchasing.
2. Safety Information
- Ensure the vehicle's battery is disconnected before beginning any installation work to prevent electrical shorts or damage.
- Always follow local regulations and laws regarding vehicle modifications and alarm systems.
- Do not attempt to install this system if you are not experienced with automotive electrical systems.
- Keep all components away from moisture and extreme temperatures.
- If your vehicle has a chip immobilizer in its factory OEM key fob, an extra bypass module (e.g., ASIN: B00MEHBVIC or B07NSLPBG7) is required.
- The steering lock must be unlocked, released, or removed during installation.
- This system is compatible with most DC12V petrol and diesel vehicles. It is not compatible with cars equipped with an OEM push start button or vehicles with a CAN BUS system.
- For diesel cars with an engine starting time over 12 seconds, an extra timer delay switch may be required.
3. Package Contents
The EASYGUARD EC010 system typically includes the following components:
- Control Module
- Key Fobs/Transmitters (2 units)
- Push Start Button
- 20-pin Main Wire Harness
- 6-pin Ignition Wire Harness
- PKE Antennas (2 units)
- Alarm Antenna
- Shock Sensor
- LED Indicator
- Reset Switch
- Relay
- User Manual & Wiring Diagram
4. Product Overview and Features
The EASYGUARD EC010 system offers a range of features for vehicle security and convenience:
- Push Button Start/Stop: Start or stop your vehicle's engine with a simple press of a button.
- Passive Keyless Entry (PKE): Automatically locks/unlocks car doors as you approach or walk away from the vehicle with the key fob.
- Remote Engine Start/Stop: Start or stop the engine remotely using the key fob, allowing for pre-cooling or pre-warming of the vehicle.
- Manual Arm/Lock & Disarm/Unlock: Standard remote control functions for locking and unlocking doors.
- Mute/Audible Alarm: Configurable alarm sound settings.
- Remote Trunk Release: Open the trunk remotely (may require an extra trunk release solenoid kit).
- Panic Mode: Activate the alarm for emergency situations.
- Valet Mode: Temporarily disable certain alarm features for service or valet parking.
- Anti-Hijacking: Security feature to prevent vehicle theft during a carjacking.
- Central Door Locking Automation: Automatically locks doors when driving and unlocks when the engine is turned off (can be enabled or disabled).
- Shock Warning: Alerts to impacts or disturbances to the vehicle.
- Emergency Override: Manual method to disarm the system in case of remote control loss or malfunction.
- Automatic Window Closing: Optional feature, requires an extra window closer module (e.g., 4-door window closer ASIN: B00N3RKA8E).
5. Setup and Installation
Installation of the EASYGUARD EC010 system requires expertise in automotive electrical systems. It is strongly recommended to have the system installed by a qualified professional.
5.1 General Installation Notes
- Ensure all connections are secure and properly insulated.
- Route wiring away from moving parts, heat sources, and sharp edges.
- If your vehicle has a factory immobilizer, a bypass module is essential for remote start and push-button start functionality.
- The steering lock must be disengaged or removed to allow the push-button start to function correctly.
5.2 PKE Antenna Installation
Proper placement of the PKE antennas is crucial for optimal passive keyless entry performance. Refer to the following video for guidance on antenna installation:
6. Operating Instructions
6.1 Key Fob Functions
The key fob provides control over various alarm and vehicle functions:
- Lock/Arm: Press the lock button once to arm the alarm and lock the doors.
- Unlock/Disarm: Press the unlock button once to disarm the alarm and unlock the doors.
- Remote Engine Start/Stop: Keep pressing the start button (often the trunk release button) for approximately 3 seconds to remotely start or stop the engine.
6.2 Passive Keyless Entry (PKE)
With PKE enabled, the system automatically manages door locks based on your proximity to the vehicle while carrying the key fob:
- Automatic Unlock: The car doors will automatically unlock when you approach the vehicle within 3-6 feet (approximately 1-2 meters).
- Automatic Lock: The car doors will automatically lock when you walk away from the car, typically within 6-9 feet (approximately 2-3 meters).
See the following video for a demonstration of PKE and remote start functions:
6.3 Push Button Start/Stop
The push button allows for keyless ignition and engine control:
- Accessory Mode: Press the push button once without pressing the brake pedal to activate accessory mode (radio, etc.).
- Ignition ON: Press the push button a second time without pressing the brake pedal to turn on the ignition (AC, dashboard lights).
- Engine Start: Press the brake pedal and then press the push button to start the engine.
- Engine Stop: Press the brake pedal and then press the push button to stop the engine.
6.4 Touch Password Entry (Optional)
Some versions of the system may include a touch password entry feature, allowing you to unlock/lock the vehicle without the key fob by entering a pre-set code on a discreet pad on the windshield.
For a comprehensive overview of the EC010's features, including PKE, remote start, and push-button operation, refer to the following video:
7. Maintenance
- Key Fob Batteries: The key fobs require 2 CR2 batteries (included). Replace batteries when the LED indicator on the fob dims or range decreases.
- System Check: Periodically check all wiring connections for looseness or corrosion.
- Cleaning: Keep the control module and other components clean and free from dust and debris. Use a soft, dry cloth for cleaning.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| PKE sensors occasionally lose signal. | Interference from external sources (e.g., strong electromagnetic fields, other wireless devices). | Move away from sources of interference. Ensure PKE antennas are correctly installed and not obstructed. If the issue persists, contact technical support. |
| Remote start not functioning. | Vehicle immobilizer not bypassed; incorrect wiring; low key fob battery. | Verify bypass module installation (if applicable). Check all wiring connections. Replace key fob batteries. Ensure vehicle is in park and doors are closed. |
| Push button start not working. | Steering lock engaged; incorrect wiring; brake pedal not pressed. | Ensure steering lock is disengaged/removed. Verify wiring. Confirm brake pedal is fully depressed. |
| Alarm triggers unexpectedly. | Shock sensor sensitivity too high; faulty sensor; loose wiring. | Adjust shock sensor sensitivity. Inspect sensor and wiring. Contact technical support if the issue continues. |
9. Specifications
- Model Number: EC010
- Power Supply: DC12V
- Compatible Devices: Most DC12V cars (excluding those with OEM push start button and CAN BUS system)
- Noise Level (Siren): 110 Decibels
- Key Fob Batteries: 2 CR2 batteries (included)
- Item Weight: 2.56 pounds
- Product Dimensions: 9.45 x 6.3 x 3.94 inches
- Manufacturer: ieasyguard.com
10. Warranty and Support
For technical support or any inquiries regarding your EASYGUARD EC010 system, please contact the manufacturer or your point of purchase. It is recommended to review the user manual and installation guide thoroughly before purchasing to ensure compatibility and understanding of the product's requirements.
Please note that installation services are not provided by the manufacturer, and professional installation is required to ensure proper functionality and to maintain any applicable warranty.
