Keurig K-Supreme Single Serve K-Cup Pod Coffee Maker

Introduction

The Keurig K-Supreme Single Serve Coffee Maker elevates your daily coffee ritual. Featuring MultiStream Technology, this brewer ensures a more even saturation of coffee grounds in every K-Cup pod, extracting full flavor and aroma. Customize your beverage with options for stronger coffee or refreshing iced coffee. Enjoy various brew sizes from 6 to 12 oz., all freshly prepared in minutes. Its sleek design and dual-position reservoir make it a convenient addition to any kitchen.

Setup

1. Unboxing: Carefully remove all components from the packaging. Remove any protective film or tape from the brewer.
2. Water Reservoir Placement: The 66 oz. dual-position reservoir can be placed on either the side or the rear of the brewer to optimize counter space. Simply slide it into the desired position until it clicks securely.
3. Initial Rinse: Before first use, fill the reservoir with fresh water. Place a large mug on the drip tray. Lift and lower the brewer handle without inserting a K-Cup pod. Press the power button to turn on the brewer. Select the largest brew size (12 oz.) and press the brew button to perform a cleansing rinse. Discard the hot water.
4. Fill Reservoir: Fill the removable water reservoir with fresh, filtered water up to the MAX fill line.

Figure 1: Keurig K-Supreme Coffee Maker in Black.

Figure 2: Easy refilling of the 66 oz. dual-position reservoir.

Operating Instructions

1. Insert K-Cup Pod: Lift the brewer handle and place a K-Cup pod into the K-Cup pod holder. Lower the handle completely to close the lid.
2. Place Mug: Place your mug or travel mug (up to 7” tall) on the drip tray.
3. Select Brew Size: Choose your desired brew size (6, 8, 10, or 12 oz.) using the illuminated buttons.
4. Customize Your Brew:
   • Strong Brew: Press the 'STRONG' button for a bolder, more intense coffee flavor.
   • Over Ice Brew: Press the 'OVER ICE' button to brew hot coffee directly over ice for a refreshing iced beverage.
5. Start Brewing: The K button will illuminate. Press the K button to begin brewing. The brewer will dispense coffee into your mug.
6. Back-to-Back Brewing: The K-Supreme allows for immediate back-to-back brewing without waiting for reheating.

Figure 3: Key features of the K-Supreme brewer.

Figure 4: MultiStream Technology for enhanced flavor extraction.

Figure 5: Brewing hot over ice for refreshing iced coffee.

Figure 6: Select your preferred brew size.

Maintenance

• Descaling: The 'MAINTENANCE ALERT' light will illuminate after every 250 brews, reminding you to descale the brewer. Follow the descaling instructions in the full user manual to ensure optimal performance and longevity.
• Cleaning: Regularly clean the drip tray and K-Cup pod holder. The drip tray is removable for easy cleaning.
• Water Filter: If using a water filter (sold separately), replace it as recommended by the filter manufacturer.

Figure 7: Dual-position reservoir for flexible counter placement.

Troubleshooting

• 'ADD WATER' Light: If this light illuminates, the water reservoir is low. Refill the reservoir with fresh water.
• 'DESCALE' Light: This indicates that the brewer needs descaling. Refer to the Maintenance section or the full user manual for detailed descaling instructions.
• No Brew: Ensure the brewer is powered on, the water reservoir is filled, and the K-Cup pod is properly inserted with the handle fully lowered.
• Weak Coffee: Try using the 'STRONG' brew setting or a smaller brew size for a more concentrated flavor. Ensure your K-Cup pod is fresh.

Specifications

Warranty & Support

For detailed warranty information and customer support, please refer to the complete user manual provided with your Keurig K-Supreme coffee maker. You can also visit the official Keurig website or contact their customer service for assistance.

User Manual (PDF): Download Here

User Guide (PDF): Download Here