Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your TESVOR S6 Robot Vacuum Cleaner. Please read this manual thoroughly before using the device to ensure proper function and longevity. The TESVOR S6 is designed to provide efficient and automated floor cleaning, featuring advanced laser navigation, powerful suction, and intelligent mapping capabilities.
Figure 1: The TESVOR S6 Robot Vacuum Cleaner and its accompanying mobile application interface.
Setup
1. What's in the Box
- TESVOR S6 Robot Vacuum Cleaner
- Charging Dock
- Power Adapter
- Side Brushes
- Main Brush
- Dustbin
- Water Tank and Mopping Pad
- Cleaning Tool
- User Manual
2. Initial Charging
Before first use, ensure the robot vacuum is fully charged. Place the charging dock against a wall in an open area with no obstacles for at least 1 meter to the sides and 2 meters in front. Connect the power adapter to the dock and a power outlet. Place the robot on the charging dock, ensuring the charging contacts align. The indicator lights will show charging status. A full charge typically takes several hours.
Figure 2: The robot vacuum automatically returns to its charging dock when the battery is low and resumes cleaning after recharging.
3. App Installation and Connection
Download the official TESVOR app (e.g., "WeBack" or similar as specified in the included manual) from your smartphone's app store. Follow the in-app instructions to connect your TESVOR S6 to your home Wi-Fi network. This typically involves pressing and holding specific buttons on the robot to enter pairing mode and then selecting your Wi-Fi network in the app. Ensure your Wi-Fi is 2.4 GHz, as 5 GHz networks are not supported.
Figure 3: The TESVOR smart app provides comprehensive control and features for your robot vacuum.
4. First Use and Mapping
For the first cleaning cycle, allow the robot to complete a full scan of your home. The laser navigation system will create a virtual map of your living space, which will be displayed in the app. This map is crucial for efficient and systematic cleaning, allowing the robot to navigate precisely and avoid missing areas.
Figure 4: Intelligent laser navigation allows the TESVOR S6 to accurately map your home for precise cleaning.
Operating the Robot Vacuum
1. Cleaning Modes
The TESVOR S6 offers various cleaning modes to suit your needs:
- S-Wave Cleaning: The robot cleans in an efficient S-shaped path, covering the entire area systematically.
- 3-Frequency Suction Control: Adjust the suction power (low, medium, high) via the app to match the cleaning intensity required for different floor types and debris levels.
- Efficient Mopping Function: Attach the water tank and mopping pad for wet cleaning. The robot will vacuum first, then mop the area. Ensure the water tank is filled and the pad is clean before mopping.
Figure 5: The TESVOR S6 utilizes systematic cleaning patterns for thorough coverage.
Figure 6: The integrated water tank and mopping pad enable efficient wet cleaning.
2. Scheduling Cleanings
Use the mobile app to set cleaning schedules. You can program the robot to clean at specific times daily, on weekdays, weekends, or custom days. Multiple timers can be set, and suction power can be adjusted for each scheduled cleaning.
3. Voice Control
The TESVOR S6 is compatible with smart home systems like Google Home. Refer to the app or the specific smart home assistant's instructions for connecting and controlling your robot vacuum using voice commands.
4. Setting No-Go Zones and Virtual Walls
Through the app, you can define virtual no-go zones or virtual walls on the generated map. This prevents the robot from entering specific areas (e.g., pet feeding areas, delicate furniture) or crossing designated boundaries. The laser navigation system will recognize and respect these defined zones.
Figure 7: The robot recognizes obstacles and no-go zones, ensuring only designated areas are cleaned.
5. Automatic Recharge and Resume
When the battery level is low, the TESVOR S6 will automatically return to its charging dock. Once sufficiently charged, it will resume cleaning from where it left off, ensuring complete coverage of your home.
Maintenance
Regular maintenance is essential for optimal performance and longevity of your TESVOR S6.
1. Dustbin and Filter Maintenance
- Emptying the Dustbin: The 0.6L dustbin should be emptied after each cleaning cycle, especially if cleaning large or heavily soiled areas. Remove the dustbin from the robot and dispose of collected debris.
- Cleaning the HEPA Filter: The triple HEPA filtration system protects against dust particles. Tap the filter gently to remove dust. Do not wash the HEPA filter with water; brush it clean. Replace the filter periodically as recommended in the full manual.
2. Brush and Wheel Cleaning
- Main Brush: Remove the main brush cover and lift out the brush. Use the provided cleaning tool to cut and remove tangled hair and debris.
- Side Brushes: Regularly check and clean the side brushes. If they are worn or damaged, replace them.
- Front Wheel: Hair and debris can accumulate around the front wheel, affecting navigation. Remove the front wheel and clean any tangled hair or dust from its axle.
3. Water Tank and Mopping Pad Care
- Water Tank: After mopping, empty any remaining water from the tank. Clean the tank with clean water and allow it to air dry.
- Mopping Pad: Remove the mopping pad after each use and wash it thoroughly. Allow it to air dry completely before reattaching or storing.
Troubleshooting
If you encounter issues with your TESVOR S6, refer to the following common problems and solutions:
- Robot gets stuck frequently: Ensure the floor is clear of cables, small objects, and thick rugs that might impede movement. The robot can overcome thresholds up to 1.8-1.9 cm.
- App connectivity issues: Verify your Wi-Fi network is 2.4 GHz. Restart your router, the robot, and the app. Ensure the robot is within Wi-Fi range.
- Robot does not return to charging dock: Ensure the charging dock is placed in an open area with sufficient clearance. Clean the charging contacts on both the robot and the dock.
- Poor cleaning performance: Empty the dustbin, clean the main brush, side brushes, and filters. Ensure the suction power is set appropriately in the app.
- Robot makes unusual noises: Check for tangled hair or debris in the main brush, side brushes, or front wheel. Clean these components thoroughly.
- Mapping inaccuracies: Allow the robot to complete a full cleaning cycle to update its map. Avoid moving the charging dock frequently.
For persistent issues not covered here, please consult the full user manual or contact customer support.
