OxyLED L23023

Download PDF
Contents

OxyLED L23023 Solar Lanterns Instruction Manual

Model: L23023

1. Introduction

The OxyLED L23023 Solar Lanterns are designed to provide decorative outdoor lighting with a realistic flickering candle effect. These lanterns are solar-powered, energy-efficient, and environmentally friendly, making them suitable for various outdoor settings such as gardens, patios, yards, and pathways. They feature an automatic on/off function and are built with durable, waterproof materials for long-lasting performance.

2. What's in the Box

Your OxyLED L23023 Solar Lanterns package includes the following items:

  • 2 x OxyLED L23023 Solar Lanterns
  • Pre-installed rechargeable NiMH batteries

3. Setup Instructions

  1. Unpack the Lanterns: Carefully remove the lanterns from their packaging.
  2. Activate the Lantern: Locate the ON/OFF switch, usually found near the battery compartment or solar panel. Slide the switch to the "ON" position. The lantern will not light up immediately if it is daytime or if the battery is not charged.
    Diagram showing the components of the solar lantern, including the portable handle, solar panel, flickering candle, and on/off switch.

    Figure 3.1: Components of the OxyLED Solar Lantern, highlighting the ON/OFF switch.

  3. Initial Charge: Place the lanterns in a location where the solar panel can receive at least 8 hours of direct sunlight. This initial charge is crucial for optimal performance. The solar panel absorbs sunlight during the day, converting it into electrical energy to charge the internal 600 mAh NiMH battery.
    Image showing a solar lantern in daylight charging and at night glowing, illustrating the auto on/off feature.

    Figure 3.2: Solar lantern charging during the day and automatically illuminating at night.

  4. Placement: The lanterns can be hung using their portable handle or placed on any flat surface. Choose a location that receives ample sunlight during the day and where you desire decorative lighting at night.
    Image demonstrating two ways to install the solar lantern: hanging from a branch and placed on the ground among leaves.

    Figure 3.3: Versatile placement options for the solar lantern.

4. Operating Instructions

Once properly set up and charged, the OxyLED L23023 Solar Lanterns operate automatically:

  • Automatic On/Off: Equipped with an integrated photocell sensor, the lanterns will automatically turn on at dusk and turn off at dawn. Ensure the ON/OFF switch is in the "ON" position for this feature to function.
  • Lighting Duration: An 8-hour charge in full sunlight typically provides 6-8 hours of light duration. The actual luminosity and duration may vary depending on the intensity and duration of daylight received by the solar panel.
  • Flickering Effect: The LED candle inside the lantern provides a realistic flickering effect, mimicking a traditional candle flame.

Video 4.1: Demonstration of the OxyLED solar lantern's automatic turn-on at night and flickering candle effect.

5. Maintenance

The OxyLED L23023 Solar Lanterns are designed for durability and require minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • Cleaning: Periodically wipe the solar panel and the lantern's glass/plastic surfaces with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures efficient charging.
  • Weather Resistance: The lanterns are IP44 waterproof and weatherproof, designed to function normally even in harsh environments. However, for extreme weather conditions (e.g., heavy snow, prolonged freezing temperatures), it is advisable to bring them indoors to extend their lifespan.
    Image showing two solar lanterns placed outdoors in the rain, with a waterproof icon, demonstrating their IP44 waterproof rating.

    Figure 5.1: The lanterns are designed to withstand outdoor elements.

  • Battery Replacement: The lanterns use rechargeable NiMH batteries. Over time, the battery capacity may decrease. If you notice a significant reduction in lighting duration, the battery may need replacement. Refer to the specifications for the correct battery type (600 mAh NiMH). Ensure the replacement battery is also rechargeable.

6. Troubleshooting

If your OxyLED L23023 Solar Lanterns are not functioning as expected, please refer to the following common issues and solutions:

Problem Possible Cause Solution
Lantern does not light up at night.
  • ON/OFF switch is in "OFF" position.
  • Insufficient sunlight for charging.
  • Solar panel is dirty.
  • Battery is depleted or faulty.
  • Ensure the switch is set to "ON".
  • Relocate the lantern to an area with direct sunlight for at least 8 hours.
  • Clean the solar panel.
  • Replace the battery if necessary (refer to Maintenance section).
Light duration is shorter than expected.
  • Insufficient charging time/sunlight.
  • Battery capacity has degraded.
  • Solar panel is obstructed or dirty.
  • Ensure the lantern receives full, direct sunlight.
  • Consider replacing the battery.
  • Clean the solar panel and ensure no obstructions.
Light is dim.
  • Partial charge.
  • Battery nearing end of life.
  • Allow for a full day's charge in direct sunlight.
  • Replace the battery.

7. Specifications

Feature Detail
Model NumberL23023
BrandOxyLED
Power SourceSolar Powered
Light Source TypeLight Emitting Diode (LED)
Light Output Maximum8 Lumens
Special FeaturesFlickering effect, Auto On/Off
Battery TypeRechargeable NiMH (600 mAh)
Battery Life (Full Charge)Up to 6-8 hours
Charging Time8 hours in direct sunlight
MaterialGlass, Plastic
Finish TypePolished
ColorBronze
Water Resistance LevelIP44 Waterproof
Product Dimensions (L x W x H)17L x 17W x 30.5H Centimetres (6.7 x 6.7 x 12 inches)
Item Weight771.11 g (1.7 Pounds)

8. Warranty & Support

Manufacturer's Warranty: The OxyLED L23023 Solar Lanterns come with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

What is Covered: This warranty covers manufacturing defects. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

How to Obtain Warranty Service: If you encounter any issues with your product within the warranty period, please contact the seller or OxyLED customer support with your proof of purchase. They will guide you through the warranty claim process.

Customer Support: For further assistance, technical support, or inquiries regarding your OxyLED L23023 Solar Lanterns, please refer to the contact information provided by your retailer or visit the official OxyLED website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.