1. Product Overview
The Lepro LED Strip Light is a versatile and dimmable lighting solution designed for various indoor applications. This 32.8-foot strip features 600 high-brightness 2835 LEDs, providing 6000K Daylight White illumination. It comes with a dimmer for convenient brightness adjustment and utilizes strong 3M adhesive for easy installation. The strip is durable, environmentally friendly, and operates at a safe 24V, ensuring low heat and touch safety.
Key Features:
- Dimmable functionality for adjustable brightness.
- Strong 3M adhesive for secure mounting, complemented by extra mounting brackets and fixing clips.
- Easy installation on smooth, dust-free surfaces.
- Durable and environmentally conscious design with low carbon footprint, no radiation, and no flicker.
- Safe to use with a 24V working voltage and extremely low heat output.
Figure 1: Components of the Lepro LED Strip Light kit, including the 32.8ft LED strip, dimmer, and power adapter.
2. Setup and Installation
Follow these steps for proper installation of your LED strip light:
- Prepare the Surface: Ensure the mounting surface is clean, dry, and smooth. Dust, dirt, or moisture can compromise the adhesive's effectiveness.
- Measure and Cut (Optional): If a shorter length is required, the LED strip can be cut at designated marks (usually indicated by a scissor icon or copper pads). Ensure the power is disconnected before cutting.
- Remove Adhesive Backing: Carefully peel off a small section of the 3M adhesive backing from the strip. Avoid touching the adhesive side to maintain its stickiness.
- Apply the Strip: Press the exposed adhesive section firmly onto the prepared surface. Gradually peel more of the backing while pressing the strip along the desired path.
- Secure with Clips (Optional): For added security, especially on textured surfaces or corners, use the provided mounting brackets and fixing clips.
- Connect Power: Connect the LED strip to the dimmer, and then connect the dimmer to the 24V power adapter. Ensure all connections are secure.
- Plug In: Plug the power adapter into a standard electrical outlet.
Figure 2: Visual guide for installing the LED strip, from surface preparation to final adhesion.
Figure 3: Wiring diagram illustrating how to connect the LED strip to the dimmer and power supply.
3. Operating Instructions
The Lepro LED Strip Light is designed for simple operation using the included dimmer.
- Power On/Off: Rotate the knob on the dimmer clockwise to turn the lights on. Continue rotating clockwise to increase brightness. Rotate counter-clockwise to decrease brightness and turn the lights off.
- Dimming: The dimmer allows for stepless adjustment of brightness from 10% to 100%. Adjust the knob to achieve your desired lighting level.
Figure 4: The dimmer allows for precise control over the LED strip's brightness.
4. Maintenance
To ensure the longevity and optimal performance of your Lepro LED Strip Light, follow these simple maintenance guidelines:
- Cleaning: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use abrasive cleaners or excessive moisture, as this can damage the LEDs or adhesive.
- Adhesive Check: Periodically check the adhesive along the strip to ensure it remains firmly attached to the surface. If any sections become loose, re-secure them with additional mounting clips or a suitable adhesive if necessary.
- Power Supply: Ensure the power adapter is kept in a dry environment and is not subjected to physical stress.
- Environmental Conditions: This product is designed for indoor use. Avoid exposing the strip to direct water, high humidity, or extreme temperatures, as it is not water-resistant.
5. Troubleshooting
If you encounter issues with your LED strip light, please refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. |
|
|
| Lights are flickering or dim. |
|
|
| Adhesive is not holding. |
|
|
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Lepro |
| Model Number | LED Strip Light, |
| Length | 32.8 ft (10 meters) |
| Light Source Type | LED (SMD 2835) |
| Number of LEDs | 600 |
| Color Temperature | 6000 Kelvin (Daylight White) |
| Luminous Flux | 1800 Lumens |
| Voltage | 24 Volts |
| Wattage | 18 watts |
| Power Source | Corded Electric |
| Special Feature | Dimmable |
| Indoor/Outdoor Usage | Indoor |
| Material | Plastic, Copper |
| Water Resistance Level | Not Water Resistant |
| Certification | UL Listed |
| Included Components | 32.8ft led strip lights |
7. Warranty and Support
For detailed warranty information and customer support, please refer to the official Lepro website or the documentation included with your product. You may also find additional resources and contact information on the Lepro Store on Amazon.
A digital version of the user manual can be accessed via this link: Lepro LED Strip Light User Manual (PDF).
