1. Introduction
This manual provides essential instructions for the safe and efficient use of your Potensic Dreamer 4K and Dreamer Pro Intelligent Flight Battery. Please read this manual thoroughly before using the battery to ensure proper operation and longevity.
Image 1.1: The Potensic Dreamer Intelligent Flight Battery (Model DSBT01A). This image displays the battery's physical appearance, including its connectors and informational labels.
2. Setup
2.1 Charging the Battery
The Potensic Dreamer Intelligent Flight Battery requires an exclusive charger (not included in this package) for optimal performance. Ensure you use the correct charger specified by Potensic for the Dreamer series drones.
- Connect the exclusive Potensic charger to a power source.
- Carefully connect the battery to the charger. Ensure the connectors are aligned correctly to avoid damage.
- The battery features fast charge technology, allowing it to be fully charged within approximately 2 hours.
- Monitor the charging indicator on the charger or battery (if available) to confirm charging status. Disconnect the battery once fully charged.
3. Operating Instructions
3.1 Installing the Battery
To install the battery into your Potensic Dreamer drone:
- Ensure the drone is powered off.
- Locate the battery compartment on the drone.
- Carefully slide the intelligent flight battery into the compartment until it clicks securely into place. Ensure there is no resistance and the battery is fully seated.
3.2 Powering On/Off
To power on or off the battery when installed in the drone:
- To Power On: Insert the battery into the Dreamer drone. Press the power button once, then press and hold the power button for 2 seconds until the indicator lights illuminate.
- To Power Off: Press the power button once, then press and hold the power button for 2 seconds until the indicator lights turn off.
4. Maintenance
4.1 Battery Care and Storage
- Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid fully discharging the battery. For long-term storage, it is recommended to store the battery with a charge level between 50% and 60%.
- Do not expose the battery to water or moisture.
- Regularly inspect the battery for any signs of damage, swelling, or leakage. Discontinue use immediately if any issues are observed.
- Use only Potensic-approved chargers and accessories.
5. Troubleshooting
5.1 Common Issues
- Battery Not Charging: Ensure the charger is properly connected to a power source and the battery. Verify that the charger is the correct model for the Potensic Dreamer battery.
- Short Flight Time: Flight time can be affected by environmental factors (wind, temperature), flight style, and battery age. Ensure the battery is fully charged before each flight.
- Battery Not Powering On: Confirm the battery is securely installed in the drone. Follow the power-on procedure: press once, then press and hold for 2 seconds.
6. Specifications
| Feature | Specification |
|---|---|
| Model | DSBT01A |
| Max Charge Voltage | 17.4V |
| Rated Voltage | 15.2V |
| Rated Capacity | 3000mAh |
| Energy | 45.6Wh |
| Battery Type | Rechargeable Li-ion Polymer Smart Battery |
| Max Flight Time | Up to 31 minutes |
| Fast Charge Time | Approx. 2 hours (with exclusive charger) |
| Item Weight | 318 g |
| Parcel Dimensions | 18.29 x 7.62 x 5.84 cm |
| Special Features | PowerAC Dynamic System |
7. Warranty and Support
For warranty information, technical support, or any inquiries regarding your Potensic Dreamer Intelligent Flight Battery, please refer to the official Potensic website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
