Modway Sage Twin Metal Headboard User Manual

Introduction

Thank you for choosing the Modway Sage Twin Metal Headboard. This manual provides essential information for the safe assembly, operation, and maintenance of your new headboard. Please read these instructions carefully before beginning assembly and retain them for future reference.

The Modway Sage Twin Metal Headboard is designed to bring a modern farmhouse aesthetic to your bedroom. Crafted from powder-coated iron, it offers a sturdy and lasting construction with an adjustable height feature to fit most twin size bed frames.

Safety Information

• Always assemble the headboard on a soft, clean surface to prevent scratches.
• Ensure all parts are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
• Use only the provided hardware. Substituting hardware may compromise the structural integrity of the headboard.
• Tighten all fasteners securely, but do not overtighten, as this may strip threads or damage components.
• Keep small parts and packaging materials away from children and pets to prevent choking hazards.
• This product is intended for indoor use only.
• WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Package Contents

Please verify that all the following components are included in your package:

• Headboard Frame (Main Section)
• Adjustable Legs (2 pieces)
• Mounting Hardware (Bolts, Washers, Nuts, Wrench)

If any items are missing or damaged, please contact Modway customer support immediately.

Setup and Assembly Instructions

Assembly of the Modway Sage Twin Metal Headboard is required. It is recommended to have two people for easier assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify each component against the package contents list.
2. Attach Adjustable Legs: Align the adjustable legs with the pre-drilled holes on the main headboard frame. Secure them using the provided bolts, washers, and nuts. Ensure the legs are oriented correctly for height adjustment.
3. Prepare for Bed Frame Attachment: Position the assembled headboard behind your twin size bed frame. The adjustable legs feature multiple mounting positions to accommodate various bed frame heights.
4. Mount to Bed Frame: Using the remaining mounting hardware, attach the headboard legs to your existing twin bed frame. Select the appropriate height setting from the seven available mounting positions to achieve your desired headboard height. Ensure all connections are secure.

Image: Front view of the Modway Sage Twin Metal Headboard, showcasing its design and adjustable leg attachment points.

Image: The Modway Sage Twin Metal Headboard installed, highlighting its powder-coated iron construction, subtle arching shape, sleek spindles, and the seven available mounting locations for height adjustment.

Operating Instructions

The Modway Sage Twin Metal Headboard is designed for static use once assembled and attached to a bed frame. Its primary adjustable feature is the height.

Adjusting Headboard Height

The headboard features seven mounting positions on its legs, allowing for height adjustment. To change the height:

1. Carefully detach the headboard from the bed frame by loosening the connecting bolts.
2. Slide the headboard legs up or down to align with a different set of pre-drilled holes on your bed frame.
3. Re-secure the headboard to the bed frame using the mounting hardware, ensuring all bolts are tightened securely.

Always ensure the headboard is stable and securely fastened to the bed frame after any adjustments.

Maintenance

Proper care will ensure the longevity and appearance of your Modway Sage Twin Metal Headboard.

• Cleaning: Wipe the headboard regularly with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes, as these can damage the powder-coated finish.
• Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Placement: Avoid placing the headboard in direct sunlight or near heat sources, which can cause fading or damage to the finish over time.

Troubleshooting

If you encounter any issues with your headboard, refer to the following common solutions:

• Headboard feels wobbly: Ensure all mounting bolts connecting the headboard to the bed frame are securely tightened. Check that the adjustable legs are properly attached to the main headboard frame.
• Difficulty attaching to bed frame: Verify that your bed frame is a standard twin size. The headboard offers seven adjustable height positions; try different positions to find the best fit for your frame. Ensure you are using the correct mounting hardware.
• Scratches on finish: Minor scratches can sometimes be touched up with a matching paint pen. For significant damage, contact customer support for advice.

If these steps do not resolve your issue, please contact Modway customer support.

Specifications

Warranty Information

The Modway Sage Twin Metal Headboard comes with a One Year Limited Warranty against manufacturer defects. This warranty covers defects in materials and workmanship under normal use and service. It does not cover damage resulting from misuse, abuse, accident, alteration, or improper assembly.

To make a warranty claim, please retain your proof of purchase and contact Modway customer support.

Customer Support

For further assistance, missing parts, or warranty inquiries, please contact Modway customer support. Have your model number (MOD-6152-GRY) and proof of purchase ready when contacting support.

You can typically find contact information on the manufacturer's website or on the product packaging.