Wood Trick Mini 3D Puzzles Instruction Manual

Introduction

This manual provides detailed instructions for assembling and understanding your Wood Trick Mini 3D Puzzles set, featuring the Gingerbread, Guitar, and Apple models. These mechanical wooden puzzles offer an engaging STEM project for beginners, designed to be both educational and enjoyable.

Image: The three assembled Wood Trick Mini 3D Puzzles: Gingerbread, Guitar, and Apple.

Safety Information

This product is recommended for ages 14 years and up. Adult supervision is advised for younger users. Contains small parts that may pose a choking hazard. Keep all components away from small children. Handle wooden pieces carefully to avoid splinters. Do not ingest any parts of the puzzle.

What's in the Box

Your Wood Trick Mini 3D Puzzles set includes:

• 37 wooden pieces (distributed across the three models)
• Instruction sheets for each model

Each model is crafted from eco-friendly plywood and is non-toxic.

Assembly Instructions

Follow these general guidelines for assembling your Wood Trick Mini 3D Puzzles. Refer to the specific instruction sheet included with each model for detailed, step-by-step visual guides.

General Assembly Steps:

1. Unpack Components: Carefully remove all wooden sheets from the packaging.
2. Identify Parts: Each wooden piece is laser-cut. Gently press out the parts from their frames. Refer to the instruction sheet to identify each part by its number or shape.
3. Smooth Edges (Optional): If any edges feel rough, you may gently sand them with fine-grit sandpaper (not included).
4. Interlock Pieces: Assemble the pieces by interlocking them according to the diagrams. Some connections may require a gentle push. Do not force pieces, as this may cause damage.
5. Use Connectors: Some models may use small wooden pegs or toothpicks for secure connections. Insert these as indicated in the instructions.
6. Test Movement: For mechanical parts, ensure they move freely after assembly. If a part is stiff, recheck the assembly steps.

Video Guide:

Model-Specific Assembly Notes:

Gingerbread Model:

The Gingerbread model features moving arms and legs. Pay close attention to the orientation of the connecting pieces to ensure smooth articulation. The small candy cane accessory attaches to the hand.

Image: Dimensions of the assembled Gingerbread puzzle, approximately 3.9 inches tall, 2.3 inches wide, and 0.9 inches deep.

Guitar Model:

The Guitar model includes small elastic bands to simulate strings. Ensure these are stretched and secured correctly for the intended aesthetic. The model comes with a small stand for display.

Image: Dimensions of the assembled Guitar puzzle, approximately 5 inches tall, 2 inches wide, and 0.5 inches deep.

Apple Model:

The Apple model features internal gears that can be activated. Carefully align the gears during assembly to ensure smooth rotation. The small worm key is used to wind the mechanism.

Image: Dimensions of the assembled Apple puzzle, approximately 3 inches tall, 3.7 inches wide, and 0.4 inches deep.

Operating Instructions

Once assembled, your Wood Trick Mini 3D Puzzles are ready for interaction:

• Gingerbread: Gently move the arms and legs to observe the articulation.
• Guitar: The elastic bands are for visual representation and are not designed for musical play.
• Apple: Insert the small worm key into the designated slot and turn it to activate the internal gears. Observe the smooth movement of the gears within the apple.

Maintenance

To ensure the longevity of your wooden puzzles:

• Keep the puzzles in a dry environment, away from direct sunlight or extreme temperature changes, to prevent warping or cracking of the wood.
• Clean with a dry, soft cloth. Avoid using water or chemical cleaners.
• If any parts become loose, they can often be re-secured with a small amount of wood glue (not included), applied carefully.

Troubleshooting

• Pieces do not fit: Ensure you are using the correct pieces as indicated in the instruction sheet. Do not force pieces. If a piece is slightly tight, gentle pressure should suffice.
• Mechanical parts are stiff: Disassemble the affected section and re-check the alignment of gears and connecting points. Ensure no excess wood dust or debris is obstructing movement.
• Missing or damaged parts: Contact Wood Trick customer support for assistance.

Specifications

Warranty and Support

For warranty information or customer support, please refer to the contact details provided on the product packaging or visit the official Wood Trick website. Specific warranty terms may vary.