ULANZI Mini Camera Tripod (U-Vlog lite Vlog Kit) Instruction Manual

Introduction

Thank you for choosing the ULANZI Mini Camera Tripod. This versatile and compact tripod is designed to enhance your photography and videography experience, offering stability and flexibility for various devices including cameras, action cameras, and smartphones. Its innovative features, such as the 360° adjustable ball head and dual cold shoe mounts, make it an essential tool for content creators.

Product Features

• Mini Tripod with Dual Cold Shoe: Allows attachment of a microphone or LED light, with a 360° rotatable cold shoe for optimal positioning.
• Tabletop Tripod with Extendable Legs: Legs extend by 75mm for increased stability and wider angles, suitable for selfies and vlogging.
• 360° Adjustable Ball Head: Aluminum tripod head can be detached and rotated 360° to achieve the best shooting angle.
• 2-in-1 Interface: Features a universal 1/4" screw interface and a cold shoe, compatible with compact cameras (e.g., Sony RX100 VII, A6400, A6500, A6600, Canon G7X Mark III) and all smartphones.
• Pocket Size: Weighs 0.4 pounds (185 grams) and is 5.9 inches (15 cm) in length, making it ultra-lightweight, compact, and easy to carry for travel or outdoor use.

Package Contents

Please check the package for the following items:

• ULANZI Mini Camera Tripod (U-Vlog lite Vlog Kit)
• Integrated 360° Ball Head with 1/4" screw and dual cold shoe mounts

Note: Additional accessories like cameras, microphones, or LED lights are sold separately.

Setup Instructions

1. Attaching Your Device

The tripod features a standard 1/4" screw mount at the top of the ball head. To attach your camera or smartphone holder:

1. Align the 1/4" screw on the tripod's ball head with the screw hole on your camera or smartphone holder.
2. Rotate your device clockwise onto the screw until it is securely fastened. Ensure it is tight enough to prevent wobbling but do not overtighten.

Image: ULANZI Mini Camera Tripod with a camera mounted, illustrating device attachment.

2. Adjusting the Ball Head

The 360° ball head allows for flexible positioning of your device:

1. Locate the tightening knob on the side of the ball head.
2. Loosen the knob by turning it counter-clockwise to adjust the angle of your device.
3. Once the desired angle is achieved, tighten the knob clockwise to lock the position securely.

Image: Detailed view of the ULANZI tripod's 360° adjustable ball head and cold shoe mounts.

3. Extending the Tripod Legs

For added stability or height, the tripod legs can be extended:

1. Gently pull each leg outwards from the main body of the tripod.
2. The legs will click into an extended position, providing a wider and more stable base.
3. To retract, press the release button located on the inside of each leg and push the leg back into its collapsed position.

Image: ULANZI Mini Camera Tripod with its legs extended, highlighting the anti-retracting lock button.

4. Using the Cold Shoe Mounts

The tripod features dual cold shoe mounts for attaching accessories:

1. One cold shoe mount is integrated into the ball head, allowing you to attach a microphone or LED light.
2. This integrated cold shoe can be rotated 360° to direct your accessory as needed.
3. To rotate, simply loosen the small knob next to the cold shoe, adjust, and then tighten.

Image: ULANZI Mini Camera Tripod with a microphone attached to its rotatable cold shoe mount, demonstrating its creative dual cold shoe ballhead design.

Operating Instructions

1. Tripod Mode

For stable, stationary shots, extend the legs and place the tripod on a flat surface. Adjust the ball head to achieve your desired camera angle.

2. Handle Grip Mode

When the legs are folded, the tripod functions as a comfortable handle grip for handheld shooting. This is ideal for vlogging or capturing dynamic footage on the go.

Image: User holding the ULANZI Mini Camera Tripod in handle grip mode with a camera attached, demonstrating its portability and ease of use.

3. Using with External Accessories

Attach microphones or LED lights to the cold shoe mounts to enhance your audio or lighting. The rotatable cold shoe allows you to position these accessories precisely for optimal performance.

Image: Various setups showing the ULANZI Mini Camera Tripod with different cameras, microphones, and LED lights, highlighting its versatility.

Maintenance

• Cleaning: Wipe the tripod with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the tripod in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check all screws and moving parts to ensure they are secure. Tighten any loose components as needed.

Troubleshooting

• Device Wobbles: Ensure your camera or smartphone holder is securely tightened onto the 1/4" screw. Check that the ball head knob is fully tightened.
• Legs Not Extending/Retracting: Ensure the release buttons on the legs are fully pressed when retracting. Check for any obstructions in the leg mechanism.
• Cold Shoe Accessory Loose: Verify that the small knob on the cold shoe mount is tightened after attaching an accessory.

Specifications

Warranty and Support

ULANZI products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact details provided on your product packaging or visit the official ULANZI website. Please retain your proof of purchase for any warranty claims.