Introduction
This manual provides essential instructions for the safe and effective use of your VAC Replacement HEPA Vacuum Bags. These bags are designed for compatibility with various Hoover WindTunnel and Tempo upright vacuum cleaner models, specifically Type Y and Type Z. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your vacuum cleaner.
Installation Instructions
- Power Off: Always ensure your vacuum cleaner is unplugged from the electrical outlet before attempting to install or replace the vacuum bag.
- Locate Bag Compartment: Refer to your vacuum cleaner's original manual to locate and open the dust bag compartment. This is typically found on the front or side of the vacuum body.
- Remove Old Bag: Carefully remove the full or old vacuum bag. Most bags have a collar that slides off a cardboard or plastic holder. Dispose of the old bag properly.
- Insert New Bag: Take a new VAC Replacement HEPA Vacuum Bag. Align the bag's cardboard collar with the bag holder inside the vacuum compartment. Slide the collar firmly onto the holder until it is securely in place. Ensure the bag is unfolded and positioned correctly within the compartment to allow for maximum capacity.
- Close Compartment: Close the dust bag compartment door securely. Ensure it latches properly to maintain suction.
- Verify Fit: Gently shake the vacuum or turn it on briefly (after plugging it in) to ensure the bag is seated correctly and there are no air leaks.
Image: A pack of VAC Replacement HEPA Vacuum Bags, illustrating the product for installation.
Operation and Usage
Once the new vacuum bag is installed, your vacuum cleaner is ready for use. These HEPA bags are designed to capture fine dust particles, allergens, and debris, improving air quality during vacuuming.
- Regular Inspection: Periodically check the dust bag indicator on your vacuum cleaner, if available. If your vacuum does not have an indicator, visually inspect the bag's fullness.
- Timely Replacement: Replace the vacuum bag when it is approximately two-thirds full, or when you notice a decrease in suction power. Overfilling the bag can strain the vacuum motor and reduce cleaning efficiency.
- Disposal: When replacing, carefully remove the full bag to prevent dust from escaping. Seal the bag if possible (some bags have a self-sealing collar) and dispose of it in household waste.
Maintenance
The VAC Replacement HEPA Vacuum Bags are disposable and require no maintenance other than timely replacement. For optimal performance of your vacuum cleaner, ensure that other filters (e.g., motor filter, exhaust filter) are cleaned or replaced according to your vacuum cleaner's specific instruction manual.
Troubleshooting
- Bag Not Fitting: Ensure you have the correct bag type (Type Y or Type Z) for your Hoover WindTunnel or Tempo model. Double-check the alignment of the bag collar with the vacuum's bag holder.
- Reduced Suction: If suction is low after installing a new bag, ensure the bag compartment door is fully closed and latched. Check if the bag is properly unfolded inside the compartment. Also, inspect the vacuum hose and attachments for blockages.
- Dust Leakage: If dust is escaping, ensure the bag is correctly sealed onto its holder and the compartment door is tightly closed. Check the bag for any tears or damage before installation.
Product Specifications
| Brand | VAC |
| Model Number | 4010100Y |
| Compatible Devices | Hoover WindTunnel (excluding Windtunnel 2), Savvy, Tempo Widepath, T-Series Windtunnel Pet, AutoDrive, Breathe Easy, Caddy Vac, Dimension, TurboPower 3500, 3700, 4500, 5000, 6000, 7000, Bagged Uprights; Royal Pro Series Uprights UR30075 UR30085 |
| Material Type | Paper |
| Number of Items | 6 (per pack) |
| Item Weight | 8.8 ounces |
| Package Dimensions | 9.96 x 6.65 x 2.99 inches |
| Special Features | HEPA filtration, Lightweight |
Warranty Information
Specific warranty details for VAC Replacement HEPA Vacuum Bags are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact the manufacturer directly.
Customer Support
If you have any questions or require assistance with your VAC Replacement HEPA Vacuum Bags, please contact the seller through the platform where the purchase was made, or refer to the manufacturer's official website for support contact information.
