Introduction
Thank you for choosing the Macally Wireless Bluetooth Mouse. This manual provides detailed instructions for setting up, operating, and maintaining your new mouse. Designed for comfort and efficiency, this mouse offers quiet clicking and versatile compatibility with various devices.
Image: The Macally Wireless Bluetooth Mouse in white, showcasing its ergonomic design.
Package Contents
- Macally Wireless Bluetooth Mouse
- 2 AAA batteries
- User Manual (this document)
Product Features
- Slim and Comfortable Design: An ultra-thin, ambidextrous design suitable for both right- and left-handed users.
- Strong Bluetooth Connection: Provides reliable wireless connectivity up to 30 feet (9 meters).
- Long Battery Life: Operates on two AAA batteries (included), offering up to 3 months of average daily use.
- Quiet Clicking: Features noise-reducing silicone membranes for up to 90% quieter clicks (scroll wheel excluded).
- Adjustable DPI: Three DPI modes (800, 1200, 1600) allow for customized cursor sensitivity.
- Wide Compatibility: Seamlessly pairs with Bluetooth-enabled Mac, MacBook Pro/Air, iPad, and PC devices.
Image: The mouse's slim and comfortable design, shown held in a user's hand.
Image: A hand demonstrating the quiet click buttons of the mouse.
Setup Instructions
- Install Batteries: Open the battery compartment on the underside of the mouse. Insert the two AAA batteries, ensuring correct polarity. Close the compartment.
- Power On: Locate the On/Off switch on the bottom of the mouse and slide it to the 'On' position.
- Enter Pairing Mode: Press and hold the scroll wheel button and the right-click button simultaneously for 2-3 seconds until the LED indicator on the mouse begins to flash, indicating it is in pairing mode.
- Connect via Bluetooth:
- For Mac/iPad: Go to System Preferences > Bluetooth (or Settings > Bluetooth on iPad). Ensure Bluetooth is enabled. Select 'Macally Bluetooth Mouse' from the list of available devices and click 'Connect'.
- For PC: Go to Settings > Devices > Bluetooth & other devices. Ensure Bluetooth is enabled. Click 'Add Bluetooth or other device' and select 'Bluetooth'. Choose 'Macally Bluetooth Mouse' from the list and follow any on-screen prompts.
- Confirmation: The LED indicator on the mouse will stop flashing and remain solid for a few seconds, then turn off, indicating a successful connection.
Image: The underside of the mouse showing the battery compartment and two AAA batteries.
Video: A demonstration of connecting the Macally Wireless Bluetooth Mouse to a computer.
Operating Instructions
The Macally Wireless Bluetooth Mouse features a standard 3-button layout with a scroll wheel for intuitive navigation.
- Left Click: Primary selection and activation.
- Right Click: Accesses contextual menus.
- Scroll Wheel: Scrolls through documents and web pages. Can also be clicked for middle-button functionality (if supported by your operating system).
DPI Adjustment
The mouse allows you to adjust cursor sensitivity (DPI) to match your preference or task requirements. There are three preset DPI levels: 800, 1200, and 1600.
- Locate the DPI switch button, typically a small button positioned behind the scroll wheel.
- Press the DPI switch button to cycle through the available sensitivity settings. Each press will change the DPI level.
- Observe the cursor movement on your screen to determine the desired sensitivity.
Image: Top and bottom views of the mouse, highlighting the DPI switch button and battery compartment.
Battery Replacement
When the mouse's performance degrades or it stops responding, it may be time to replace the batteries.
- Turn the mouse over and locate the battery compartment cover.
- Slide the cover open.
- Remove the old AAA batteries.
- Insert two new AAA batteries, ensuring they are placed with the correct positive (+) and negative (-) terminals as indicated inside the compartment.
- Close the battery compartment cover securely.
- Turn the mouse back on.
Troubleshooting
| Problem | Solution |
|---|---|
| Mouse not connecting/pairing |
|
| Cursor movement is erratic or unresponsive |
|
| Mouse disconnects frequently |
|
Video: An overview of the Bluetooth Optical Silent Click Mouse, including its features and setup.
Specifications
| Feature | Detail |
|---|---|
| Model Number | BTDYNAMOUSEW |
| Connectivity | Bluetooth |
| Movement Detection | Optical |
| DPI Settings | 800 / 1200 / 1600 |
| Battery Type | 2 x AAA batteries (included) |
| Estimated Battery Life | Up to 3 months (average daily use) |
| Wireless Range | Up to 30 feet (9 meters) |
| Dimensions | 6.97 x 4.17 x 1.34 inches |
| Item Weight | 3.87 ounces |
| Compatibility | Mac OS X, Windows, iPadOS, Android |
Warranty and Support
Macally is committed to product excellence and customer satisfaction. Your Macally Wireless Bluetooth Mouse comes with:
- Lifetime Support: Access to dedicated customer assistance for the lifespan of your product.
- Hassle-Free Returns: Easy return process if you are not completely satisfied.
- Up to 2-Year Warranty: Coverage against manufacturing defects. Please refer to the official Macally website for full warranty terms and conditions.
For further assistance, please visit the Macally Store on Amazon or contact Macally customer support directly.
