Introduction
This manual provides essential instructions for the safe and proper operation of your Crosley CR8017A-GY Voyager Portable Vinyl Record Player. Please read this manual thoroughly before use and retain it for future reference.
Package Contents
- Crosley Voyager Portable Turntable
- 45 RPM Adapter
- 3.5mm Aux In Cable
- Power Adapter
Product Overview
Familiarize yourself with the components of your Crosley Voyager turntable.
Top View (Open)
Image: Top view of the Crosley Voyager turntable, open, revealing the record platter, tonearm, and various control knobs for speed, pitch, and volume.
Front View (Closed)
Image: The Crosley Voyager turntable in its closed, portable suitcase configuration, displaying the front speaker grille and the Crosley logo.
Rear View (Ports)
Image: The back panel of the Crosley Voyager turntable, highlighting the RCA Line Out jacks (red and white), the 3.5mm Aux In port, and the DC power input.
Controls and Connections
- Platter: Where records are placed.
- Tonearm: Holds the stylus (needle) for playing records.
- Cueing Lever: Lifts and lowers the tonearm.
- Speed Selector: Adjusts playback speed (33 1/3, 45, 78 RPM).
- Pitch Control: Fine-tunes playback speed.
- Volume/Power Knob: Controls power and audio volume.
- Function Switch: Selects between Phono (record player) and Bluetooth modes.
- Headphone Jack: For private listening.
- Aux In Jack: Connect external audio devices.
- RCA Line Out Jacks: Connect to external stereo systems.
- DC Power Input Jack: Connect the power adapter.
Setup
- Unpack: Carefully remove the turntable and all accessories from the packaging.
- Placement: Place the turntable on a flat, stable surface.
- Power Connection: Connect the power adapter to the DC Power Input Jack on the rear of the unit, then plug the adapter into a wall outlet.
- Remove Stylus Protector: Gently remove the white plastic stylus protector from the needle assembly.
- Initial Power On: Turn the Volume/Power knob clockwise to power on the unit.
Operating Instructions
Playing Records
- Power On: Turn the Volume/Power knob clockwise to power on the unit.
- Select Phono Mode: Set the Function Switch to the PHONO position.
- Place Record: Place a record on the turntable platter. If playing a 45 RPM single, use the included 45 RPM adapter.
- Select Speed: Set the Speed Selector to the appropriate speed (33 1/3, 45, or 78 RPM) for your record.
- Lift Tonearm: Gently lift the tonearm using the cueing lever.
- Position Tonearm: Move the tonearm over the desired starting track of the record.
- Lower Tonearm: Slowly lower the tonearm onto the record using the cueing lever. The record will begin to play.
- Adjust Volume: Adjust the volume using the Volume/Power knob.
- Adjust Pitch: Use the Pitch Control knob to fine-tune the playback speed if needed.
- Stop Playback: At the end of the record, the tonearm will automatically return to its rest position (auto-stop feature). To manually stop, lift the tonearm with the cueing lever and return it to the tonearm rest.
Bluetooth Operation
- Power On: Turn the Volume/Power knob clockwise to power on the unit.
- Select Bluetooth Mode: Set the Function Switch to the BLUETOOTH position. The indicator light will flash blue, indicating pairing mode.
- Enable Bluetooth on Device: On your Bluetooth-enabled device (e.g., smartphone, tablet), enable Bluetooth and search for "Crosley Voyager".
- Pair Device: Select "Crosley Voyager" from the list of available devices to pair. Once paired, the indicator light will turn solid blue.
- Play Music: You can now stream music from your device to the turntable's built-in speakers. Adjust volume using both your device and the turntable's Volume/Power knob.
Image: Demonstrates connecting a smartphone via Bluetooth to the Crosley Voyager turntable, allowing wireless audio streaming to the turntable's speakers.
Auxiliary Input
- Connect Device: Use the included 3.5mm Aux In cable to connect an external audio device (e.g., MP3 player) to the Aux In jack on the rear of the turntable.
- Power On: Turn the Volume/Power knob clockwise to power on the unit.
- Play Music: Play music from your connected device. The audio will play through the turntable's speakers.
- Adjust Volume: Adjust the volume using both your external device and the turntable's Volume/Power knob.
Image: A detailed view of the Aux In port on the back of the turntable, showing a 3.5mm audio cable connected for external device playback.
Headphone Output
- Connect Headphones: Plug your headphones into the headphone jack located on the front of the turntable.
- Private Listening: Audio will be routed to your headphones, silencing the built-in speakers.
- Adjust Volume: Adjust the volume using the Volume/Power knob.
Image: A close-up of the turntable's control panel, highlighting the headphone jack and the volume/power knob for private listening.
RCA Line Out
- Connect to External System: Use an RCA cable (not included) to connect the RCA Line Out jacks on the rear of the turntable to an auxiliary input on your stereo system or powered speakers.
- Ensure Correct Input: Select the corresponding input on your external audio system.
- Adjust Volume: Adjust the volume primarily on your external audio system. The turntable's volume knob will still affect the output level.
Image: A detailed view of the red and white RCA Line Out ports on the back of the turntable, used for connecting to external audio systems.
Maintenance
- Cleaning the Stylus: Use a soft brush to gently clean the stylus (needle) from back to front. Do not use harsh chemicals.
- Cleaning the Turntable: Wipe the turntable cabinet with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Record Care: Keep your records clean and free of dust to ensure optimal playback and prolong stylus life.
- Storage: When not in use, ensure the tonearm is secured in its rest and the lid is closed to protect the components from dust.
Troubleshooting
| Problem | Solution |
|---|---|
| No power | Ensure the power adapter is securely connected to the unit and a working wall outlet. Check if the Volume/Power knob is turned on. |
| No sound from speakers | Check the volume level on the turntable and any connected external devices. Ensure the Function Switch is set correctly (PHONO for records, BLUETOOTH for Bluetooth audio). If headphones are plugged in, unplug them. |
| Record skips | Ensure the record is clean and free of dust or debris. Check if the turntable is on a stable, level surface. The stylus may need cleaning or replacement. |
| Bluetooth not connecting | Ensure the turntable is in Bluetooth pairing mode (flashing blue light). Make sure Bluetooth is enabled on your device and it is within range. Try unpairing and re-pairing the device. |
| Sound is distorted or too fast/slow | Verify the Speed Selector is set to the correct RPM for the record. Adjust the Pitch Control knob to fine-tune the speed. |
Specifications
- Model: CR8017A-GY
- Power: AC Adapter
- Speeds: 33 1/3, 45, 78 RPM
- Drive System: Belt Drive
- Connectivity: Bluetooth In, 3.5mm Aux In, RCA Line Out
- Built-in Speakers: Yes
- Material: Plastic
- Item Weight: 5.5 pounds
Warranty Information
This Crosley product is covered by a One Year Limited Manufacturer's Warranty from the date of original purchase. This warranty covers defects in materials and workmanship under normal use. For full terms and conditions, please refer to the warranty card included with your product or contact Crosley customer support.
Support
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact Crosley customer support. You can find contact information on the official Crosley website or through your product documentation.
Official Product Video:
Video: An official product video showcasing the features and operation of the Crosley CR8017A-GY Voyager Bluetooth Turntable.
