Introduction
Thank you for purchasing the RASTAR 1/18 Ferrari FXX-K EVO RC Car Assembly Kit. This kit provides an engaging building experience, culminating in a fully functional remote-controlled supercar. This manual contains essential information for assembling, operating, and maintaining your model. Please read it thoroughly before beginning assembly or operation.
Safety Precautions
- This product is recommended for ages 8 and up. Adult supervision is advised during assembly and operation.
- Keep small parts out of reach of children under 3 years old to prevent choking hazards.
- Do not operate the RC car near people, pets, or obstacles to avoid injury or damage.
- Ensure batteries are inserted with correct polarity. Do not mix old and new batteries, or different types of batteries.
- Remove batteries from the car and remote control when not in use for extended periods.
- Avoid operating the car in wet conditions or on sand, as this can damage electronic components.
Setup and Assembly
The RASTAR Ferrari FXX-K EVO kit includes 92 pieces for assembly. Follow the step-by-step instructions provided in the separate assembly guide included in your package. The following outlines the general process and key considerations.
1. Unboxing and Parts Identification
Carefully unpack all components. Refer to the parts list in your assembly guide to identify each piece. Ensure all 92 pieces are present before starting assembly.
Image: The complete RASTAR Ferrari FXX-K EVO RC Car Assembly Kit, with all components neatly organized in the box.
2. Chassis and Electronic Assembly
Begin by assembling the main chassis components. This involves connecting the base structure and integrating the electronic parts such as the motor, receiver, and wiring. Pay close attention to the wiring diagrams in the assembly guide.
Image: The car's chassis with the motor, battery compartment, and wiring correctly installed.
3. Body Panel and Wheel Assembly
Once the chassis is complete, attach the body panels, wheels, and other exterior details. Ensure all connections are secure. The kit includes detailed instructions for each step.
Image: A close-up of hands assembling a component of the car, demonstrating the building process.
4. Decal Application
Apply the included decals to the car body for a realistic finish. Use tweezers for precise placement as shown in the assembly guide.
Image: Applying a decal to the car body using tweezers for accuracy.
5. Battery Installation
Install the required batteries into both the RC car and the remote controller. Refer to the assembly guide for specific battery types and placement. Ensure correct polarity.
Image: The completed Ferrari FXX-K EVO RC car and its remote control, ready for operation.
Operating Instructions
1. Power On and Pairing
- Turn on the RC car using the power switch located on the chassis.
- Turn on the remote controller. The indicator light on the remote should blink.
- The remote and car will automatically pair. Once paired, the indicator light on the remote will become solid. If pairing fails, turn both devices off and on again.
2. Basic Controls
- Forward/Backward: Use the throttle trigger on the remote control. Pull to move forward, push to move backward.
- Left/Right Steering: Use the steering wheel on the remote control to turn the car left or right.
3. Driving Tips
- Operate the car on a flat, clean surface for optimal performance.
- Avoid driving on carpet or rough terrain, which can reduce speed and battery life.
- Maintain a clear line of sight between the remote control and the car to prevent signal loss. The 2.4GHz frequency provides a stable connection.
Image: The Ferrari FXX-K EVO RC car in motion, highlighting its 2.4GHz remote control technology.
Maintenance
1. Cleaning
- Wipe the car with a soft, dry cloth after each use to remove dust and debris.
- Do not use water or chemical cleaners, as they can damage the electronics and paint finish.
2. Battery Care and Storage
- Always remove batteries from the car and remote control when storing for extended periods.
- Store the car and remote in a cool, dry place away from direct sunlight and extreme temperatures.
- Dispose of used batteries responsibly according to local regulations.
3. Inspection
- Periodically check for loose screws or connections. Tighten as necessary.
- Inspect the wheels and axles for any hair or debris that might impede movement.
Image: Detailed view of the car's wheel and interior, showing areas to inspect for maintenance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not move or respond. | Low batteries in car or remote; incorrect battery installation; car/remote not paired; power switch off. | Replace batteries; check polarity; re-pair car and remote; ensure power switches are ON. |
| Short control range or intermittent signal. | Low batteries; environmental interference; distance too far. | Replace batteries; move to an open area away from other electronic devices; operate within recommended range. |
| Car moves slowly or lacks power. | Low batteries; driving on unsuitable surfaces (e.g., thick carpet). | Replace batteries; operate on smooth, hard surfaces. |
| Steering is not straight. | Steering trim adjustment needed. | Adjust the steering trim dial on the remote control until the car drives straight. |
Specifications
- Model Number: 96900
- Scale: 1:18
- Product Dimensions: 10 x 4 x 3 inches (25.4 x 10.16 x 7.62 cm)
- Item Weight: 1.94 pounds (0.88 kg)
- Number of Pieces: 92
- Control Frequency: 2.4 GHz
- Recommended Age: 8+ Years
- Batteries Required: Not included (Specific types will be listed in the assembly guide for car and remote)
Warranty and Support
RASTAR products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official RASTAR website. Please retain your proof of purchase for any warranty claims.
