ROCKBROS Kids Full Face Helmet Instruction Manual

Introduction

Thank you for choosing the ROCKBROS Kids Full Face Helmet. This manual provides essential information for the proper setup, operation, and maintenance of your helmet. Please read these instructions carefully before use to ensure maximum safety and product longevity. This helmet is designed to provide protection for various activities including cycling, skateboarding, roller skating, and scootering.

Safety Information

• Always ensure the helmet is properly fitted and secured before any activity.
• This helmet is certified for safety (CE certification) but cannot protect against all possible impacts.
• Replace the helmet immediately after any significant impact, even if visible damage is not apparent.
• Do not modify the helmet in any way, as this may compromise its protective capabilities.
• Avoid exposing the helmet to extreme temperatures or harsh chemicals.

Product Overview

The ROCKBROS Kids Full Face Helmet is engineered for safety, comfort, and versatility. Key features include a durable PC shell, high-density EPS foam, a detachable chin guard, and an adjustable fitting system.

This image displays the ROCKBROS Kids Full Face Helmet in black and orange, emphasizing its lightweight construction (13.4 oz) and 12 large vents designed for breathability and comfort.

This image illustrates the helmet's 2-in-1 detachable design, showing how the chin guard can be removed to convert it from a full-face helmet to a half-helmet for different riding conditions.

Setup and Adjustment

1. Sizing and Head Circumference Measurement

To ensure optimal protection, select the correct helmet size. Measure your child's head circumference approximately 1 cm above the ear, at the widest part of the head.

• Size S: 19.3-22 inches (49-56 cm)
• Size M: 22-22.8 inches (56-58 cm)

A visual guide for measuring head circumference to ensure proper helmet fit. It specifies sizes S (19.3-22 inches / 49-56 cm) and M (22-22.8 inches / 56-58 cm) with corresponding age ranges.

2. Fitting the Helmet

1. Place the helmet on your child's head, ensuring it sits level and covers the forehead.
2. Adjust the 360° regulator at the back of the helmet by turning it right to tighten or left to loosen. The helmet should feel snug but comfortable, without excessive movement.
3. Fasten the chin strap buckle. Adjust the straps so they form a 'V' shape under the ears and are snug against the chin without causing discomfort. Only one finger should fit between the strap and the chin.

A close-up view of the helmet's rear 360° adjustable buckle, which allows for quick and precise fitting to the child's head circumference.

3. Attaching and Detaching the Chin Guard

The helmet features a removable chin guard for versatile use:

• To Detach: Locate the buttons on each side of the chin guard where it connects to the main helmet. Press these buttons firmly and pull the chin guard downwards and away from the helmet.
• To Attach: Align the connectors on the chin guard with the slots on the helmet. Push the chin guard upwards until you hear a click on both sides, indicating it is securely fastened.

Operation

Once the helmet is properly fitted and adjusted, it is ready for use. Ensure the chin guard is attached for activities requiring full-face protection (e.g., mountain biking, BMX) or detached for more casual riding (e.g., balance bike, scooter).

Maintenance

1. Cleaning

• Outer Shell: Wipe the exterior with a soft cloth dampened with mild soap and water. Do not use abrasive cleaners or solvents.
• Inner Padding: The helmet features a removable and washable inner liner. Detach the padding and hand wash it with mild soap and water. Allow it to air dry completely before reinserting.

This image provides a detailed breakdown of the helmet's construction, highlighting the durable PC shockproof shell, high-density EPS foam, removable and washable inner liner, and adjustable nylon belts for secure and comfortable wear.

2. Storage

Store the helmet in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the helmet.

3. Inspection

Regularly inspect the helmet for any signs of wear, cracks, or damage to the shell, straps, or padding. If any damage is found, discontinue use and replace the helmet.

Troubleshooting

• Helmet feels loose: Tighten the 360° regulator at the back and adjust the chin straps for a snug fit.
• Chin guard not attaching securely: Ensure both side buttons are fully engaged and you hear a click. Check for any obstructions in the connection points.
• Discomfort: Re-adjust the helmet's position, straps, and regulator. Ensure the inner padding is correctly installed.

Specifications

Warranty and Support

ROCKBROS stands behind the quality of its products. For any warranty claims, technical support, or inquiries, please contact ROCKBROS customer service through the retailer where the product was purchased or visit the official ROCKBROS website. Please retain your proof of purchase for warranty validation.