1. Important Safety Instructions
Please read all instructions carefully before using this appliance and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Always unplug the fan before moving, cleaning, or whenever the fan is not in use.
- Be sure to pull by the plug and not the cord when unplugging the appliance.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fan.
- Do not use outdoors.
- This appliance is intended for household use only.
2. Product Overview
The MISTRAL Mimica MHV998R is a 10-inch high velocity stand fan designed for efficient air circulation in home office environments. It features a Direct Current (DC) motor for quiet and energy-efficient operation, along with advanced control options.
This image displays the MISTRAL Mimica MHV998R High Velocity Stand Fan. It is a white, 10-inch stand fan with a circular head, a slender stand, and a round base. The fan head is tilted upwards, showcasing its spiral grille design.
Key Features:
- Direct Current (DC) motor
- Room temperature display
- 12 Speed selection
- 8-Hour programmed timer
- Natural and Eco mode
- Left and right auto-oscillation with 3 angle selections
- Up and down auto-oscillation with 3 angle selections
- Multifunction remote control
- Sensor touch controls and LED display
3. Setup
Unpacking:
Carefully remove the fan from its packaging. Ensure all components are present: 1 x Stand Fan and 1 x Remote Control.
Assembly:
This MISTRAL Mimica MHV998R fan requires no assembly. It is ready for use directly out of the box.
Placement:
Place the fan on a stable, flat surface. Ensure there is adequate space around the fan for optimal air circulation and oscillation. Avoid placing it near curtains or other objects that could obstruct the airflow or interfere with the fan blades.
Power Connection:
Plug the power cord into a standard electrical outlet. Ensure the voltage matches the requirements specified on the product label.
4. Operating Instructions
The fan can be operated using the sensor touch controls on the unit or the provided remote control.
Power On/Off:
- Press the Power button on the fan's control panel or the remote control to turn the fan on or off.
- The LED display will show the current room temperature when the fan is on.
Speed Selection:
- Press the Speed button to cycle through the 12 available speed settings. The current speed will be indicated on the LED display.
Timer Function:
- Press the Timer button to set the fan to operate for a specific duration, up to 8 hours. Each press will increase the timer by one hour. The set time will be displayed.
Oscillation:
- Horizontal Oscillation: Press the Horizontal Oscillation button to activate left and right auto-oscillation. Press again to cycle through 3 angle selections or to turn off.
- Vertical Oscillation: Press the Vertical Oscillation button to activate up and down auto-oscillation. Press again to cycle through 3 angle selections or to turn off.
Operating Modes:
- Natural Mode: Press the Mode button to select Natural mode, which simulates natural breezes by varying fan speed.
- Eco Mode: Press the Mode button again to select Eco mode, which adjusts fan speed based on room temperature for energy efficiency.
5. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your fan.
Cleaning:
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- For the fan blades and grille, use a vacuum cleaner with a brush attachment or a soft, dry cloth to remove dust.
- Ensure no water or liquids enter the motor housing.
- Allow the fan to dry completely before plugging it back in and operating.
Storage:
When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.
6. Troubleshooting
If you encounter any issues with your MISTRAL Mimica MHV998R fan, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. Power button not pressed. | Ensure the power cord is securely plugged into a working outlet. Press the Power button on the unit or remote control. |
| Remote control is not working. | Batteries are depleted or incorrectly inserted. Obstruction between remote and fan. | Replace batteries with new ones, ensuring correct polarity. Remove any obstructions and ensure direct line of sight. |
| Fan makes unusual noise. | Dust accumulation on blades. Fan not on a stable surface. | Unplug the fan and clean the blades and grille. Place the fan on a firm, level surface. |
| Oscillation is not functioning. | Oscillation feature not activated. Obstruction. | Press the respective oscillation button (Horizontal or Vertical) on the control panel or remote. Check for any objects blocking the fan's movement. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
| Brand | MISTRAL |
| Model | MHV998R |
| Electric Fan Design | Floor Fan / Stand Fan |
| Colour | White |
| Power Source | Corded Electric |
| Product Dimensions | 11.2D x 11.2W x 27.8H centimetres |
| Item Weight | 2.2 Kilograms |
| Special Features | Remote Controlled, Timer, 12 Speed Selection, Natural & Eco Mode, Auto-Oscillation |
| Controller Type | Remote Control, Sensor Touch |
| Number of Pieces | 1 |
| Assembly Required | No |
| Batteries Required | No (for fan unit) |
| Included Components | 1 x Stand Fan, 1 x Remote Control |
8. Warranty & Support
Warranty Information:
This MISTRAL Mimica MHV998R High Velocity Stand Fan comes with a 1-Year Guarantee from the date of purchase. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact MISTRAL customer support. Refer to the product packaging or the official MISTRAL website for the most current contact information.
