ANLAN Mini Hair and Beard Straightening Brush

1. Introduction

Thank you for choosing the ANLAN Mini Hair and Beard Straightening Brush. This device is designed to help you achieve a well-groomed and styled look for both your hair and beard with ease and efficiency. Please read this manual carefully before use to ensure safe and optimal performance.

2. Safety Information

Important Safety Warnings:

• Remove the device from water and flammable materials.
• Do not touch the hot surface to avoid burns. After use, unplug the device.
• Do not use when your hair or beard is wet, as the heat generated when the device is in contact with wet hair will damage hair follicles, and hot steam can harm facial skin.
• Do not use a hairdryer to blow-dry hair or beard, as hot air can make hair brittle and frizzy. Use only a towel to dry.
• The tool heats up very quickly. Therefore, set an appropriate temperature for your beard before use to prevent damage.
• Use a specially formulated mild hair and beard shampoo to clean hair or beard no more than 3 times a week. Excessive cleaning can strip the skin's natural protection.

3. Product Features

• Rapid Ceramic Heating: PTC heating technology provides maximum thermal energy, heating and maintaining a constant temperature within 30 seconds for quick and lasting results.
• 5 Temperature Settings: Adjustable temperatures (120-140-160-180-200°C) suitable for daily use and refined styling. Recommended temperatures: 120-180°C for soft beards, above 160°C for coarse beards.
• Suitable for Various Hair Types: Effective on curly, flat, thin, thick, long, or short hair and beards, providing a natural and elastic shape.
• 360° Anti-Scald Rotating Cord: The specially designed 360° rotating cord allows for comfortable control at all angles during styling, enhancing usability for both left and right-handed users.

4. Setup

1. Unpack the ANLAN Mini Hair and Beard Straightening Brush from its packaging.
2. Inspect the device for any visible damage. Do not use if damaged.
3. Ensure your hair and beard are completely dry before proceeding to operation.

5. Operating Instructions

Follow these steps for effective styling:

1. Prepare Hair/Beard: Ensure both your hair and beard are completely dry before using the brush.
2. Power On: Simply plug in the ANLAN beard straightening brush and press the power button to turn it on.
3. Set Temperature: Use the '+' and '-' buttons to select your desired temperature setting (120-140-160-180-200°C). The device will heat up rapidly, reaching the set temperature within 30-60 seconds.
4. Styling: Brush your hair and beard, moving from the roots to the tips until the desired smoothness is achieved. Multiple passes through the same strands will not damage hair.
5. Finish: When finished, turn off the beard straightener by pressing the power button and unplug it from the power outlet.

Warm Tip: Using beard oil or balm will help moisturize the beard and skin, and maintain the beard style achieved after using the straightener.

Image: Man using the ANLAN beard straightening brush to style his beard.

Image: Close-up of the ANLAN straightening brush showing temperature controls and rapid heating indicator.

6. Maintenance

• Always unplug the device and allow it to cool completely before cleaning.
• Wipe the exterior of the brush with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure no water enters the internal components of the device.
• Store the brush in a dry place, away from direct sunlight and moisture.

7. Troubleshooting

If you encounter any issues with your ANLAN Mini Hair and Beard Straightening Brush, please refer to the following common solutions:

• Device not turning on: Ensure the device is properly plugged into a working power outlet. Check if the power button is pressed and held for a few seconds to activate.
• Device not heating up: Verify that the temperature setting is selected. Allow up to 60 seconds for the device to reach the desired temperature.
• Poor styling results: Ensure your hair and beard are completely dry before use. Adjust the temperature setting according to your hair/beard type (lower for soft, higher for coarse). Make sure to brush slowly from roots to tips.
• Overheating or unusual smell: Immediately unplug the device and discontinue use. Contact customer support.

For further assistance, please contact ANLAN customer support.

8. Specifications

9. Warranty and Support

ANLAN offers comprehensive support for your product:

• 30-Day Full Refund: If you are not satisfied with your purchase, you are eligible for a full refund within 30 days.
• 12-Month Warranty: The product comes with a 12-month warranty covering manufacturing defects.
• 365-Day Technical Support: Our dedicated support team is available for technical assistance throughout the year.

If you have any questions or require technical support, please do not hesitate to contact us. Our team will respond within 24 hours. Your satisfaction is our top priority.