1. Introduction
Thank you for choosing the XPCLEOYZ Moving Head Stage Light. This professional lighting fixture is designed for various applications including weddings, DJ parties, and stage performances. It features 8 gobos, 8 colors, and supports 11 DMX channels, along with sound-activated and auto modes. Please read this manual thoroughly before operation to ensure safe and proper use.
Image: A pair of XPCLEOYZ Moving Head Stage Lights, showcasing their compact design and control panel.
2. Safety Instructions
- Always connect the fixture to a grounded circuit to avoid the risk of electrocution.
- Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source.
- Ensure adequate ventilation around the fixture. Do not block ventilation openings.
- Mount the fixture securely using appropriate clamps and safety cables.
- Disconnect from power before cleaning or performing any maintenance.
- Do not operate in wet or damp conditions.
3. Package Contents
Upon unpacking, please verify that all components are present and in good condition:
- XPCLEOYZ Moving Head Stage Light (2 units)
- Power Cable (2 units)
- Mounting Bracket (2 units)
- User Manual (this document)
4. Setup
4.1 Mounting
The fixture can be mounted on a truss, on the floor, or on a stand. Use the provided mounting bracket and ensure it is securely fastened with appropriate clamps and a safety cable. Always ensure the mounting surface can support the weight of the fixture.
4.2 Power Connection
Connect the provided power cable to the power input on the rear of the fixture and then to a suitable power outlet (100V-240V AC, 50/60Hz).
4.3 DMX Connection
For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the last fixture in the chain has a DMX terminator connected to its DMX OUT port.
Image: Rear panel of the light, highlighting the DMX IN/OUT and power connections.
5. Operating Modes
The fixture can be operated in several modes, selectable via the onboard control panel (MENU, UP, DOWN, ENTER buttons) and LED display.
5.1 DMX 512 Control Mode
This mode allows precise control over the fixture's functions using a DMX controller. The fixture utilizes 11 DMX channels. Set the DMX address for each fixture using the control panel. Refer to the DMX Channel Chart (Section 5.4) for specific channel functions.
5.2 Sound-Activated Mode
In this mode, the light reacts to ambient sound. The built-in microphone detects sound, and the light's movements, colors, and gobos will synchronize with the music beat. Sensitivity can often be adjusted via the control panel.
5.3 Auto Mode
The fixture runs through pre-programmed light shows automatically. Various auto programs may be available, selectable through the control panel.
5.4 DMX Channel Chart (11 Channels)
The specific functions for each of the 11 DMX channels can be accessed and viewed through the fixture's internal menu system. This typically includes control over Pan, Tilt, Pan/Tilt Speed, Dimmer, Strobe, Color Wheel, Gobo Wheel, and various special effects.
Image: Examples of the 8 distinct gobo patterns projected by the light.
6. Maintenance
6.1 Cleaning
Regular cleaning of the lens and housing is recommended to maintain optimal light output and extend the fixture's lifespan. Use a soft, lint-free cloth and a mild glass cleaner. Ensure the fixture is unplugged and cool before cleaning.
6.2 Storage
When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a padded case to prevent damage.
Image: Internal view of the light, illustrating the drive mechanism, main board, and power supply unit.
Image: Close-up of the internal cooling fan, essential for maintaining optimal operating temperature.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | No power from outlet; faulty cable; internal fuse blown | Check power outlet; replace cable; contact service for fuse replacement |
| No DMX control | Incorrect DMX address; faulty DMX cable; no terminator | Verify DMX address; check/replace DMX cables; add DMX terminator |
| Light not moving | Motor issue; DMX signal problem; stuck mechanism | Check DMX signal; gently check for obstructions; contact service |
| No light output | LED failure; power issue | Ensure power is stable; contact service for LED replacement |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | XPCLEOYZ |
| Model Number | XPCYT |
| Light Source Type | LED |
| Light Source Wattage | 60 Watts |
| Voltage | 100 Volts |
| Brightness | 2561 Lumen |
| DMX Channels | 11 Channels |
| Gobos | 8 Gobos |
| Colors | 8 Colors |
| Control Modes | DMX 512, Sound Activated, Auto |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions | 9"L x 9"W x 10"H |
| Item Weight | 0.092 ounces (per unit) |
| Mounting Type | Floor Mount |
Image: Diagram showing the dimensions of the moving head light in centimeters.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact XPCLEOYZ customer service through the retailer where the product was purchased or visit the official XPCLEOYZ website. Please have your model number (XPCYT) and purchase date available when contacting support.