1. Introduction
This user manual provides comprehensive instructions for the installation, maintenance, and optimal use of your TeKeHom Replacement Accessory Kit for the IKOHS netbot S15 Robot Vacuum Cleaner. Regular replacement and proper maintenance of these accessories are crucial for ensuring your robot vacuum operates at peak performance, maintaining a clean and healthy home environment.
2. Product Contents
Your TeKeHom Replacement Accessory Kit includes the following components:
- 1 x Main Brush
- 8 x Filters (HEPA style with foam)
- 6 x Side Brushes
- 4 x Mop Pads

Figure 2.1: TeKeHom Replacement Accessory Kit Components. This image displays all components of the TeKeHom replacement accessory kit. On the top left, four blue mop pads are stacked. To their right, eight white filters with black frames are arranged in two rows of four. Below the mop pads, six yellow and grey side brushes are vertically aligned. To the right of the side brushes, a black and yellow main brush is shown vertically.
3. Compatibility
This accessory kit is specifically designed for and fully compatible with the IKOHS netbot S15 Robot Vacuum Cleaner. Please ensure your robot vacuum model matches this specification for proper fit and function.
4. Setup & Installation
Before installing any new accessories, ensure your robot vacuum cleaner is powered off and unplugged from its charging base.
4.1. Installing the Main Brush
- Turn the robot vacuum cleaner upside down.
- Locate the main brush cover, usually secured by two tabs or screws.
- Open or remove the cover.
- Lift out the old main brush.
- Insert the new main brush, ensuring the ends align with the slots in the vacuum.
- Close or re-secure the main brush cover.
4.2. Installing Side Brushes
- Turn the robot vacuum cleaner upside down.
- Locate the side brushes. They are typically held in place by a single screw or snap-on mechanism.
- Remove the old side brushes. If screwed, unscrew them.
- Align the new side brushes with the corresponding posts on the vacuum.
- Press firmly or screw them into place until secure.
4.3. Installing Filters
- Open the dustbin compartment of your robot vacuum.
- Remove the dustbin.
- Locate the filter assembly within the dustbin.
- Remove the old filter(s).
- Insert the new filter(s) into the designated slot, ensuring a snug fit.
- Reinsert the dustbin into the vacuum cleaner.
4.4. Installing Mop Pads
- Locate the mop pad attachment on your robot vacuum (if applicable, usually a water tank or mop plate).
- Remove the old mop pad.
- Attach the new mop pad to the designated area, ensuring it is securely fastened (e.g., via Velcro or clips).
- Fill the water tank if using the wet mopping function.
5. Operating Guidelines
Once the new accessories are installed, your IKOHS netbot S15 is ready for operation.
- Ensure the dustbin is empty and the mop pad is clean before each cleaning cycle for optimal performance.
- For best results, run the vacuum regularly to prevent excessive dirt buildup.
- If using the mopping function, ensure the water tank is filled with clean water.
6. Maintenance
Regular maintenance of your replacement accessories is vital for extending their lifespan and maintaining the cleaning efficiency of your robot vacuum.
- Filters: Clean filters frequently, ideally after every few uses, by tapping out dust or using a small brush. Replace filters every 2 to 3 months, or more often if you have pets or experience reduced suction.
- Main Brush: Inspect and clean the main brush regularly, removing any tangled hair or debris. Use the cleaning tool provided with your vacuum (if applicable) to cut and remove hair.
- Side Brushes: Check side brushes for wear and tear. Clean them by removing tangled hair or debris. Replace them if bristles are bent or damaged, typically every 3-6 months depending on usage.
- Mop Pads: Wash mop pads after each use. They can be hand-washed or machine-washed. Replace them when they show signs of significant wear or reduced absorbency.
Note: The replacement frequency may vary based on your usage habits and home environment (e.g., presence of pets, carpeted areas).
7. Troubleshooting
If you encounter issues after replacing accessories, consider the following:
- Reduced Suction:
- Ensure the filter is clean and correctly installed.
- Check the dustbin for overfilling.
- Inspect the main brush for blockages or excessive debris.
- Poor Edge Cleaning:
- Verify side brushes are securely attached and not tangled.
- Replace side brushes if bristles are worn or bent.
- Mop Pad Not Wetting:
- Ensure the water tank is filled and properly installed.
- Check for any blockages in the water dispensing nozzles (if applicable to your vacuum model).
For persistent issues, refer to your IKOHS netbot S15 robot vacuum's original user manual or contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | TeKeHom |
| Compatible Model | IKOHS netbot S15 Robot Vacuum Cleaner |
| Kit Contents | 1 Main Brush, 8 Filters, 6 Side Brushes, 4 Mop Pads |
| ASIN | B088KBYSR1 |
| Manufacturer | TeKeHom |
| Date First Available | September 6, 2022 |
| Spare Parts Availability | Information unavailable |
9. Warranty & Support
TeKeHom offers a lifetime satisfaction or money-back guarantee for this product.
For any dissatisfaction or issues with the products or service, please do not hesitate to contact us. We are committed to providing every customer with a fantastic shopping experience and will do our best to resolve any problems you may encounter.
Contact information for support is typically available through your purchase platform or the manufacturer's official website.