LORYERGO LELD04
Contents
LORYERGO Lap Desk with Light User Manual
Model: LELD04
1. Introduction
Thank you for choosing the LORYERGO Lap Desk with Light. This portable lap desk is designed to enhance your comfort and productivity while working, reading, or writing from your bed, couch, or floor. It features a built-in LED light, a comfortable pillow cushion, a phone/tablet slot, and an anti-slip strip for secure device placement. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your new lap desk.
2. Product Overview
2.1 Key Features
- Integrated LED Light: Provides additional illumination for reading, writing, or working, with a magnetic design for flexible positioning.
- Comfortable Pillow Cushion: Soft foam padding offers ergonomic support and reduces pressure on your lap.
- Wide Compatibility: Accommodates laptops up to 15.6 inches, with a dedicated mouse pad area for smaller laptops (14 inches or less).
- Multi-functional Slot: Designed to hold your phone, tablet, or pens securely.
- Anti-slip Strip: Prevents your laptop or other devices from sliding off the surface.
- Portable Design: Equipped with a convenient handle for easy transport.
2.2 Components
Familiarize yourself with the main components of your LORYERGO Lap Desk:
- Desk Surface: The primary work area.
- Pillow Cushion: Soft base for comfort on your lap.
- LED Light: Detachable and magnetic light source.
- Phone/Tablet Slot: Integrated groove for holding mobile devices.
- Mouse Pad Area: Designated surface for mouse operation.
- Anti-slip Bar: Raised edge to prevent devices from sliding.
- Carry Handle: For easy portability.

Figure 2.2.1: Overview of the LORYERGO Lap Desk with Light.

Figure 2.2.2: Detailed view of the integrated phone/tablet slot, pen holder, and mouse pad area.
3. Setup
- Unpack: Carefully remove the lap desk from its packaging.
- Inspect: Check for any signs of damage during transit. If damaged, contact customer support.
- LED Light Battery Installation (if applicable): The LED light may require batteries (not specified in product details, assume it's rechargeable or comes with batteries). If battery-operated, insert the required batteries according to the polarity markings. If rechargeable, ensure it is fully charged before first use.
- Positioning: Place the lap desk comfortably on your lap, ensuring the pillow cushion provides stable support.
4. Operating Instructions
4.1 Using the Lap Desk
- Laptop Placement: Place your laptop (up to 15.6 inches) on the main desk surface. Ensure it rests against the anti-slip bar to prevent sliding.
- Tablet/Phone Placement: Insert your tablet or smartphone into the dedicated slot for hands-free viewing.
- Mouse Usage: If your laptop is 14 inches or smaller, you can utilize the integrated mouse pad area for external mouse operation.
- Reading/Writing: The spacious surface is suitable for books, notebooks, and other materials.

Figure 4.1.1: Using the lap desk for laptop work.

Figure 4.1.2: Using the lap desk for reading.
4.2 Using the LED Light
- Attachment: The LED light features a magnetic base. Simply place it on the designated magnetic spot on the lap desk surface.
- Activation: Locate the power button on the LED light and press it to turn the light on or off.
- Adjustment: The flexible neck of the LED light allows you to adjust the angle and direction of the illumination as needed.

Figure 4.2.1: The magnetic LED light in use.
4.3 Portability
To transport your lap desk, simply lift it by the integrated carry handle. Its lightweight design makes it easy to move between rooms or take with you on the go.

Figure 4.3.1: Carrying the lap desk using the handle.
5. Maintenance
- Cleaning the Surface: Wipe the desk surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cleaning the Cushion: The fabric cushion can be spot cleaned with a mild soap and water solution. Allow it to air dry completely before use. Do not immerse the cushion in water.
- LED Light Care: Keep the LED light clean and free of dust. If battery-operated, replace batteries as needed. If rechargeable, ensure proper charging practices.
- Storage: Store the lap desk in a dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED Light not turning on. | Low or dead batteries (if applicable). Light not properly seated on magnetic base. | Replace batteries or ensure the light is fully charged. Re-seat the light firmly on the magnetic base. |
| Laptop sliding on surface. | Laptop not positioned against the anti-slip bar. | Ensure your laptop is placed firmly against the anti-slip bar at the bottom edge of the desk surface. |
| Lap desk feels unstable. | Improper positioning on lap or uneven surface. | Adjust the lap desk to ensure the pillow cushion is fully supported by your lap or the surface you are using. |
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | LORYERGO |
| Model Number | LELD04 |
| Material | Foam (cushion) |
| Product Dimensions (L x W x H) | 17"W x 11.8"D x 2.4"H |
| Item Weight | 3.3 Pounds (approx. 1.5 kg) |
| Compatibility | Laptops up to 15.6 inches |
| Special Features | Portable, Built-in LED Light, Phone/Tablet Slot, Mouse Pad, Anti-slip Bar, Pillow Cushion |

Figure 7.1: Product dimensions and key features.

Figure 7.2: Laptop size compatibility overview.
8. Warranty and Support
LORYERGO products are designed for durability and performance. For any questions, concerns, or warranty inquiries regarding your Lap Desk with Light, please contact LORYERGO customer support through the retailer where you purchased the product or visit the official LORYERGO website for contact information.
Please retain your proof of purchase for warranty claims.
9. Important Safety Information
- Do not place excessively heavy items on the lap desk.
- Keep the lap desk away from open flames or extreme heat sources.
- Avoid spilling liquids on the desk surface, especially near the LED light or electronic devices.
- Do not attempt to disassemble or modify the product, especially the LED light component.
- Keep out of reach of small children to prevent accidental injury or damage.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.