Introduction
This manual provides comprehensive instructions for the proper use, care, and maintenance of your new Police Prata/Branco Watch, model PL-10962JS/04M. Please read this manual thoroughly before using your watch to ensure optimal performance and longevity. Keep this manual for future reference.
Product Overview
The Police Prata/Branco Watch is a stylish timepiece featuring a reliable Japanese Quartz movement and a robust stainless steel construction. It is designed for daily wear and is water-resistant up to 100 meters, making it suitable for swimming and snorkeling.
Image: Police Prata/Branco Watch (Model PL-10962JS/04M). This image displays the watch with its silver-colored stainless steel bracelet and white dial, highlighting its classic design.
Image: Police Watch Packaging. This image shows the black textured box in which the Police watch is typically presented, along with a small warranty booklet.
Setup
1. Setting the Time
- Pull the crown (the small knob on the side of the watch case) out to the first or second position (depending on the model, usually the outermost position for time setting).
- Turn the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
- Once the time is set, push the crown back into its original position against the watch case. Ensure it is fully pushed in to maintain water resistance.
2. Adjusting the Bracelet
The stainless steel bracelet can be adjusted for a comfortable fit. This typically involves removing or adding links. It is recommended to have this procedure performed by a professional jeweler or watch repair service to avoid damage to the bracelet or clasp.
Image: Watch Size Guide. This diagram illustrates various watch case diameters (14-16mm to 50-54mm) and strap widths (1 inch to 2 inches) to help visualize watch proportions.
Operating Instructions
Timekeeping
Your Police watch is powered by a Japanese Quartz movement, ensuring accurate timekeeping. The watch operates continuously once the time is set and the crown is fully pushed in. No winding is required for quartz movements.
Water Resistance
This watch is water-resistant up to 100 meters (10 ATM). This means it is suitable for recreational swimming, showering, and snorkeling. It is not suitable for scuba diving or high-impact water sports. Always ensure the crown is fully pushed in before any contact with water. Do not operate the crown or pushers (if present) while the watch is wet or submerged.
Maintenance
Cleaning
- Wipe the watch case and bracelet with a soft, dry cloth regularly to remove dust and dirt.
- For stubborn dirt, especially on the stainless steel bracelet, use a slightly damp cloth with mild soap. Ensure no water or soap enters the watch case. Dry thoroughly immediately after cleaning.
- Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish or seals.
Battery Replacement
The quartz movement is powered by a battery. The typical battery life is 2-3 years. When the watch stops running, it indicates the battery needs replacement. It is highly recommended to have the battery replaced by a qualified watch technician to ensure the watch's water resistance is maintained after the case back is opened and resealed.
Water Resistance Care
- Always ensure the crown is fully pushed in before exposing the watch to water.
- Avoid exposing the watch to extreme temperature changes (e.g., hot shower immediately followed by cold water), as this can compromise the seals.
- Have the water resistance seals checked periodically (e.g., every 2-3 years) by a professional, especially if the watch is frequently exposed to water.
Troubleshooting
- Watch not running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
- Condensation under the crystal: This indicates a loss of water resistance. Immediately take the watch to a professional for inspection and repair to prevent further damage to the movement.
- Time is inaccurate: If the watch is consistently fast or slow, the quartz movement may require servicing. This should be handled by a professional watch repair service.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | Police |
| Model Number | PL-10962JS/04M |
| Product Dimensions | 11.99 x 10.01 x 8.99 cm; 299.37 g |
| Display Type | Analog |
| Watch Movement | Japanese Quartz |
| Special Features | Water Resistant |
| Power Source | Battery Powered |
| Strap Type | Stainless Steel Bracelet |
| Water Resistance Depth | 100 Meters (10 ATM) |
| Clasp Type | Deployment Clasp |
| Band Color | Silver |
| Dial Color | Silver |
| Case Material Type | Stainless Steel |
| Dial Window Material Type | Glass |
| Case Diameter | 44 Millimeters |
| Band Width | 20 Millimeters |
| Case Thickness | 13 Millimeters |
| Age Range Description | Adult |
| International Trade Identification Number | 07640116435476 |
Warranty and Support
Your Police watch comes with a manufacturer's warranty. Please refer to the warranty booklet included with your purchase for specific terms, conditions, and duration. In case of any issues or for service inquiries, please contact the authorized Police watch service center or your retailer.
For general inquiries or support, please visit the official Police brand website or contact their customer service department. Keep your proof of purchase for warranty claims.
