1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Hella 014565111 Mini-16Inch LED Light Bar. Please read these instructions carefully before use to ensure safe and efficient operation of the product. This LED light bar is designed for automotive applications, specifically as an emergency strobe light, featuring an amber lens and bracket mounting.
2. Product Overview
The Hella 014565111 is a compact 16-inch LED light bar, engineered for visibility and durability. It features multiple LED modules housed within a robust, waterproof casing with an amber lens, suitable for various vehicle types. The unit is equipped with integrated mounting brackets for secure attachment.
Figure 1: Hella 014565111 Mini-16Inch LED Light Bar. This image displays the Hella 014565111 Mini-16Inch LED Light Bar. It features a dark gray housing with a clear lens revealing multiple amber LED modules. The unit is equipped with two metal mounting brackets on the underside, designed for secure attachment to a vehicle.
3. Safety Information
- Always disconnect the vehicle's battery before performing any electrical work.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Mount the light bar in a location that does not obstruct the driver's view or interfere with vehicle safety systems.
- Verify that the light bar's operation complies with all local and national regulations for emergency lighting.
- Do not look directly into the light source when operating, as it may cause eye strain or temporary vision impairment.
4. Setup and Installation
The Hella 014565111 LED Light Bar is designed for straightforward installation using its integrated mounting brackets. No assembly of the light bar itself is required.
4.1 Mounting
- Select a suitable mounting location on your vehicle, typically on the roof or a flat surface, ensuring it is secure and provides maximum visibility. The light bar dimensions are approximately 15.94 x 10.43 x 2.56 inches.
- Mark the positions for drilling holes using the light bar's mounting brackets as a template.
- Drill appropriate-sized holes for the mounting hardware (not included, typically bolts and washers).
- Securely attach the light bar to the vehicle using suitable fasteners, ensuring a tight fit to prevent vibration.
4.2 Wiring
- Route the power cable from the light bar to the vehicle's electrical system, ensuring it is protected from sharp edges and heat sources.
- Connect the positive (+) wire of the light bar to a fused 12V/24V power source (depending on vehicle voltage) that is switched, such as an auxiliary switch or ignition-controlled circuit.
- Connect the negative (-) wire of the light bar to a reliable ground point on the vehicle chassis.
- Test the light bar's functionality before finalizing all connections and reassembling any removed vehicle panels.
5. Operating Instructions
Once properly installed and wired, the Hella 014565111 LED Light Bar operates by applying power to its circuit. The light bar is designed to function as a rotating beacon or strobe light, providing high visibility amber illumination.
- Activate the light bar by turning on the connected auxiliary switch in your vehicle.
- Deactivate the light bar by turning off the auxiliary switch.
- Refer to your vehicle's specific wiring diagram or consult a professional if you require advanced control options or pattern selection, as these features are dependent on the wiring setup.
6. Maintenance
The Hella 014565111 LED Light Bar is designed for minimal maintenance due to its durable and waterproof construction.
- Cleaning: Periodically clean the lens with a soft cloth and mild soap and water to ensure maximum light output. Avoid abrasive cleaners or solvents that could damage the lens material.
- Inspection: Regularly check mounting hardware for tightness and inspect wiring for any signs of wear, fraying, or corrosion.
- Waterproof Feature: The unit is waterproof, but avoid directing high-pressure water jets directly at seals or electrical connections.
7. Troubleshooting
If the light bar is not functioning as expected, perform the following checks:
- No Light Output:
- Check the power connection to ensure it is secure and receiving voltage.
- Verify the ground connection is clean and properly established.
- Inspect the fuse in the power circuit; replace if blown.
- Ensure the auxiliary switch is functioning correctly.
- Intermittent Operation:
- Check for loose wiring connections or corroded terminals.
- Ensure the power source is stable and not experiencing voltage drops.
- Dim Light Output:
- Clean the lens surface to remove dirt or debris.
- Verify the power supply voltage is within the specified operating range.
If problems persist after performing these checks, contact Hella customer support or a qualified automotive electrician.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Hella |
| Model Number | 014565111 |
| Manufacturer Part Number | 2RL 014 565-111 |
| Product Dimensions (L x W x H) | 15.94 x 10.43 x 2.56 inches |
| Item Weight | 3.3 pounds |
| Lens Color | Amber |
| Special Feature | Waterproof |
| Vehicle Service Type | Car |
| Auto Part Position | Center |
| Assembly Required | No (for the light bar itself) |
9. Warranty and Support
For warranty information and technical support, please refer to the official Hella website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.
Hella Contact Information:
Please visit www.hella.com for regional contact details and support resources.
