1. Product Overview
The Kohler K-26533-CP Industrial Towel Bar is designed to provide a durable and reliable solution for your bathroom. Its industrial aesthetic is inspired by machined metal tools, offering a strong and unpretentious character suitable for contemporary spaces. This 18-inch (457 mm) bar is constructed from premium metal and features a Polished Chrome finish, engineered to resist corrosion and tarnishing.
Key Features:
- 18-inch (457 mm) bar length.
- Premium metal construction for durability and reliability.
- KOHLER finishes resist corrosion and tarnishing.
- Coordinates with contemporary-style KOHLER faucets and showering components.
Image 1.1: The Kohler K-26533-CP Industrial Towel Bar, showcasing its polished chrome finish and industrial design.
2. Setup and Installation
This section provides general guidelines for installing your Kohler K-26533-CP Industrial Towel Bar. Specific mounting hardware and detailed templates may be included with your product. Always refer to any included manufacturer's instructions for precise measurements and hardware usage.
Tools and Materials Required:
- Pencil
- Measuring tape
- Level
- Drill with appropriate drill bits (for wall anchors)
- Screwdriver (Phillips or flathead, depending on hardware)
- Stud finder (recommended)
Installation Steps:
- Determine Mounting Location: Choose a suitable location on your wall, ensuring it is level and at a convenient height. Use a stud finder to locate wall studs for secure mounting, if possible.
- Mark Mounting Points: Hold the towel bar's mounting brackets against the wall at the desired location. Use a level to ensure proper alignment. Mark the screw hole positions with a pencil.
- Drill Pilot Holes: Drill pilot holes at the marked positions. If mounting into drywall without a stud, use appropriate wall anchors (typically included) and drill holes according to anchor specifications.
- Attach Mounting Brackets: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached and level.
- Assemble Towel Bar: Attach the towel bar to the secured mounting brackets. This usually involves sliding the bar onto the brackets and tightening set screws from underneath or the side to hold it in place.
- Final Check: Gently pull on the installed towel bar to ensure it is secure and stable.
3. Operating Instructions
The Kohler K-26533-CP Industrial Towel Bar is designed for straightforward use. Simply hang your towels, washcloths, or other bathroom linens over the bar. Ensure items are evenly distributed to maintain balance and prevent excessive strain on the mounting.
4. Maintenance and Care
Proper care will help maintain the finish and extend the life of your Kohler towel bar.
- Regular Cleaning: Clean the surface regularly with a soft, damp cloth.
- Mild Soap: For more thorough cleaning, use a mild soap solution and rinse thoroughly with water.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or chemical-based cleaning agents (e.g., ammonia, bleach, or acid-based cleaners) as these can damage the polished chrome finish.
- Drying: Always dry the towel bar immediately after cleaning to prevent water spots.
5. Troubleshooting
If you encounter any issues with your towel bar, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Towel bar feels loose or wobbly. | Mounting screws are loose or wall anchors are not secure. | Tighten mounting screws. If anchors are loose, consider using larger or different type of wall anchors, or relocating the bar to a wall stud. |
| Finish appears dull or stained. | Hard water spots or residue from harsh cleaners. | Clean with a soft cloth and mild soap. Avoid abrasive cleaners. For hard water spots, use a vinegar-water solution (1:1) and rinse thoroughly. |
| Towel bar detaches from brackets. | Set screws holding the bar to the brackets are loose. | Locate and tighten the set screws, typically found on the underside of the mounting posts. |
6. Specifications
| Attribute | Detail |
|---|---|
| Model Number | K-26533-CP |
| Color | Polished Chrome |
| Material | Metal |
| Finish Type | Polished |
| Installation Type | Wall Mounted |
| Shape | Straight |
| Item Weight | 2.2 Pounds |
| Product Dimensions | 4 x 18 x 3.63 inches |
| UPC | 885612823120 |
7. Warranty Information
This Kohler K-26533-CP Industrial Towel Bar is covered by the KOHLER Faucet Lifetime Limited Warranty. Please refer to the official Kohler warranty documentation for full terms and conditions. This warranty typically covers defects in material and manufacturing under normal use and service.
8. Support and Contact
For further assistance, technical support, or warranty claims, please contact Kohler customer service or visit their official website.
- Kohler Official Website: www.kohler.com
- Kohler Store on Amazon: Visit the Kohler Store
When contacting support, please have your product model number (K-26533-CP) and purchase information readily available.
