Product Overview
The Minka Lavery Andrita Court Outdoor Wall Sconce (Model 72020-A179) is a 1-light, 100-watt wall-mounted fixture designed for outdoor use. It features a textured French Bronze finish and Pearl Mist Glass, providing an elegant and functional lighting solution for porches, patios, and other wet locations.
Figure 1: Minka Lavery Andrita Court Outdoor Wall Sconce, featuring a textured French Bronze finish and Pearl Mist Glass.
Safety Information
WARNING:
- Always turn off the power at the main fuse or circuit breaker box before beginning installation.
- Consult a qualified electrician if you are unsure about the installation process.
- This fixture is ETL Approved for WET Locations, ensuring safety in outdoor environments.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
- Do not exceed the maximum wattage specified for the bulb (100 Watts).
What's in the Box
Verify that all components are present before beginning installation:
- 1 x Minka Lavery Andrita Court Outdoor Wall Sconce Fixture
- Mounting Hardware (screws, wire nuts, etc.)
- Instruction Manual
Note: Light bulb(s) and junction box are not included.
Setup and Installation
This fixture is designed for surface mount installation to an existing junction box. Follow these steps carefully:
- Prepare for Installation:
- Turn off power at the circuit breaker or fuse box.
- Ensure the mounting surface is clean, dry, and structurally sound.
- Mounting the Fixture:
- Attach the mounting bracket (if separate) to the junction box using the provided screws.
- Connect the fixture's wires to the corresponding house wires (black to black, white to white, ground to ground) using wire nuts. Ensure all connections are secure.
- Carefully tuck the wires into the junction box.
- Align the fixture with the mounting bracket and secure it in place with the provided screws or nuts.
- Install Bulb and Glass:
- Insert one A19 type bulb (max 100 Watts, E26 Medium Screw Base) into the socket.
- Carefully place the Pearl Mist Glass shade into the fixture, ensuring it is seated correctly and securely.
- Restore Power:
- Turn the power back on at the circuit breaker or fuse box.
- Test the light fixture.
Operating Instructions
The Minka Lavery Andrita Court Outdoor Wall Sconce operates on a standard 120V electrical system. It is designed to be dimmable, allowing you to adjust the light output with a compatible dimmer switch (sold separately).
- Power On/Off: Control the fixture using your existing wall switch.
- Dimming Function: If connected to a compatible dimmer switch, use the dimmer's control (e.g., push button, remote) to adjust the brightness level. Ensure the installed bulb is also dimmable.
- Bulb Compatibility: This fixture supports Fluorescent, Halogen, Incandescent, and LED bulbs with an E26 Medium Screw Base, up to 100 Watts. For optimal dimming performance, use dimmable LED bulbs.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your outdoor wall sconce.
- Cleaning:
- Before cleaning, ensure the power is turned off at the circuit breaker.
- Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- For the glass shade, use a mild glass cleaner if necessary, applied to a cloth, not directly to the fixture.
- Bulb Replacement:
- Turn off power to the fixture before replacing the bulb.
- Allow the bulb to cool completely before touching it.
- Unscrew the old bulb and screw in a new A19 type bulb (max 100 Watts, E26 Medium Screw Base).
- Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.
Troubleshooting
If you encounter issues with your Minka Lavery outdoor wall sconce, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims inconsistently. |
|
|
| Glass shade is loose. |
|
|
If the problem persists after attempting these solutions, contact a qualified electrician or Minka Lavery customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 72020-A179 |
| Dimensions (H x W x D) | 14.5" H x 7.5" W x 4.5" D |
| Product Dimensions (L x W x H) | 14.5"L x 8"W x 14.5"H |
| Weight | 3.81 lbs |
| Number of Lights | 1 |
| Max Wattage Per Bulb | 100 Watts |
| Socket Base | E26 Medium Screw Base |
| Recommended Bulb Type | A19 |
| Voltage | 120V |
| Dimmable | Yes |
| Finish Type | Textured French Bronze |
| Shade Material | Glass (Pearl Mist Glass) |
| Indoor/Outdoor Usage | Outdoor (ETL Approved for WET Locations) |
| Installation Type | Surface Mount |
| Included Components | Mounting Hardware |
| UPC | 747396111865 |
Warranty Information
This Minka Lavery product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the documentation provided with your purchase or contact Minka Lavery customer support directly.
Customer Support
For technical assistance, replacement parts, or any questions not covered in this manual, please contact Minka Lavery customer support. You can typically find contact information on the manufacturer's official website or on the product packaging.
Visit the official Minka Lavery website for more information: www.minkalavery.com
